# LM22670QMRE-ADJ

**Texas Instruments** · DC-DC Converters · SOIC-8-EP

LM22670QMRE-ADJ from Texas Instruments, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | input | Bootstrap input that provides the gate voltage for the high-side NFET; the datasheet limits the BOOT pin voltage to VSW + 7 V. |
| 2 | NC | unconnected | Not electrically connected inside the chip, but the pin does function as a thermal conductor. |
| 3 | RT/SYNC | input | Switching frequency adjustment and synchronization input that sets the oscillator mode (resistor-adjustable from 200 kHz to 1 MHz, or synchronized to a system clock); the pin voltage is limited to -0.5 V to 7 V. |
| 4 | FB | input | Feedback input to the regulator; the pin voltage is limited to -0.5 V to 7 V. |
| 5 | EN | input | Precision enable input that controls regulator start-up and shut-down and sets UVLO; the pin voltage is limited to -0.5 V to 6 V. |
| 6 | GND | power_in | Ground input to the regulator and the system ground pin. |
| 7 | VIN | power_in | Supply input to the regulator; the recommended VIN range is 4.5 V to 42 V with an absolute maximum of 43 V to GND. |
| 8 | SW | output | Switching output of the regulator; DC voltage is limited to -5 V to VIN, with a -10 V limit for pulses up to 50 ns. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8-EP |
| Category | Power Management (PMIC) |
| Pins | 9 |

## CAD (KiCad official)

- Symbol: `LM22670QMRE-ADJ`
- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm`
- 3D model: SOIC-8-EP (KiCad packages3D, STEP)
- 3D model files: `lm22670qmre-adj-etched.step` / `lm22670qmre-adj-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm22670qmre-adj.step` / `lm22670qmre-adj.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm22670-q1) (38 pp, sha256 `5d2cd199b79fcc67`, retrieved 2026-10-08, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/lm22670qmre-adj-datasheet.pdf)