main
Ray
Publish 0.1.0
68fca7d
LM22670MRX-5.0
Texas Instruments · DC-DC Converters · SOIC-8-EP
LM22670MRX-5.0 from Texas Instruments, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | input | Bootstrap input that provides the gate voltage for the high-side NFET, with a 10 nF ceramic capacitor connected between BOOT and SW. |
| 2 | NC | unconnected | Not connected inside the chip, but the pin does function as a thermal conductor. |
| 3 | RT/SYNC | input | Switching frequency adjustment and synchronization input: floating selects the 500 kHz internal clock, a 25 kΩ to 200 kΩ resistor to ground sets 200 kHz to 1 MHz, and an external clock synchronizes the regulator up to 1 MHz. |
| 4 | FB | input | Feedback input to the regulator, which for the -5.0 option is connected directly to the output voltage. |
| 5 | EN | input | Precision enable input that turns the regulator off when pulled below 1.6 V (typ) and must never exceed the 6 V absolute maximum. |
| 6 | GND | power_in | Ground input to the regulator and system ground pin, to be connected to the exposed pad. |
| 7 | VIN | power_in | Supply input to the regulator, with a recommended operating range of 4.5 V to 42 V and an absolute maximum of 43 V VIN to GND. |
| 8 | SW | output | Switching output of the regulator, with an absolute maximum SW to GND of -5 V DC (-10 V for pulses up to 50 ns) up to VIN. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8-EP |
| Category | Power Management (PMIC) |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback Voltage (VIN = 8 V to 42 V) | VFB | 4.925 | 5 | 5.075 | V | VIN = 8 V to 42 V | 5 |
| Feedback Voltage over temperature | VFB | 4.9 | 5.1 | V | VIN = 8 V to 42 V, -40°C ≤ TJ ≤ 125°C | 5 | |
| Current Limit | ICL | 3.4 | 4.2 | 5.3 | A | 5 | |
| Current Limit over temperature | ICL | 3.35 | 5.5 | A | -40°C ≤ TJ ≤ 125°C | 5 | |
| Standby Quiescent Current | ISTDBY | 25 | 40 | µA | EN Pin = 0 V | 5 | |
| Output Leakage Current | IL | 0.2 | 2 | µA | VIN = 42 V, EN Pin = 0 V, VSW = 0 V | 5 | |
| Output Leakage Current | IL | 0.1 | 3 | µA | VSW = -1 V | 5 | |
| Switch On-Resistance (SO PowerPAD-8) | RDS(ON) | 0.1 | 0.16 | Ω | SO PowerPAD-8 Package | 5 | |
| Switch On-Resistance (SO PowerPAD-8) over temperature | RDS(ON) | 0.2 | Ω | SO PowerPAD-8 Package, -40°C ≤ TJ ≤ 125°C | 5 | ||
| Oscillator Frequency over temperature | fO | 400 | 600 | kHz | -40°C ≤ TJ ≤ 125°C | 5 | |
| Enable Threshold Voltage (falling) over temperature | VEN | 1.3 | 1.9 | V | Falling, -40°C ≤ TJ ≤ 125°C | 5 | |
| Maximum Synchronization Frequency | FSYNC | 1 | MHz | VSYNC = 3.5 V, 50% duty-cycle | 5 | ||
| Oscillator Frequency | fO | 500 | kHz | 5 | |||
| VIN to GND | 43 | V | 4 | ||||
| EN Pin Voltage | -0.5 | 6 | V | 4 | |||
| RT/SYNC Pin Voltage | -0.5 | 7 | V | 4 | |||
| SW to GND | -5 | V | DC voltage; extended -10 V limit for pulses up to 50 ns | 4 | |||
| FB Pin Voltage | -0.5 | 7 | V | 4 | |||
| Junction Temperature | 150 | °C | 4 | ||||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Electrostatic discharge (HBM) | V(ESD) | -2 | 2 | kV | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001 | 4 | |
| VIN Supply Voltage | VIN | 4.5 | 42 | V | 4 | ||
| Junction Temperature Range | -40 | 125 | °C | 4 | |||
| Junction-to-ambient thermal resistance (SO PowerPAD-8, DDA) | RθJA | 60 | °C/W | Mounted to 1 square inch of copper | 4 |
CAD (KiCad official)
- Symbol:
LM22670MRX-5.0 - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: SOIC-8-EP (KiCad packages3D, STEP)
- 3D model files:
lm22670mrx-5-0-etched.step/lm22670mrx-5-0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm22670mrx-5-0.step/lm22670mrx-5-0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
d2ef244f2c5ecf68, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM22670MRX-5.0
**Texas Instruments** · DC-DC Converters · SOIC-8-EP
LM22670MRX-5.0 from Texas Instruments, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | input | Bootstrap input that provides the gate voltage for the high-side NFET, with a 10 nF ceramic capacitor connected between BOOT and SW. |
| 2 | NC | unconnected | Not connected inside the chip, but the pin does function as a thermal conductor. |
| 3 | RT/SYNC | input | Switching frequency adjustment and synchronization input: floating selects the 500 kHz internal clock, a 25 kΩ to 200 kΩ resistor to ground sets 200 kHz to 1 MHz, and an external clock synchronizes the regulator up to 1 MHz. |
| 4 | FB | input | Feedback input to the regulator, which for the -5.0 option is connected directly to the output voltage. |
| 5 | EN | input | Precision enable input that turns the regulator off when pulled below 1.6 V (typ) and must never exceed the 6 V absolute maximum. |
| 6 | GND | power_in | Ground input to the regulator and system ground pin, to be connected to the exposed pad. |
| 7 | VIN | power_in | Supply input to the regulator, with a recommended operating range of 4.5 V to 42 V and an absolute maximum of 43 V VIN to GND. |
| 8 | SW | output | Switching output of the regulator, with an absolute maximum SW to GND of -5 V DC (-10 V for pulses up to 50 ns) up to VIN. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8-EP |
| Category | Power Management (PMIC) |
| Pins | 9 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback Voltage (VIN = 8 V to 42 V) | VFB | 4.925 | 5 | 5.075 | V | VIN = 8 V to 42 V | 5 |
| Feedback Voltage over temperature | VFB | 4.9 | | 5.1 | V | VIN = 8 V to 42 V, -40°C ≤ TJ ≤ 125°C | 5 |
| Current Limit | ICL | 3.4 | 4.2 | 5.3 | A | | 5 |
| Current Limit over temperature | ICL | 3.35 | | 5.5 | A | -40°C ≤ TJ ≤ 125°C | 5 |
| Standby Quiescent Current | ISTDBY | | 25 | 40 | µA | EN Pin = 0 V | 5 |
| Output Leakage Current | IL | | 0.2 | 2 | µA | VIN = 42 V, EN Pin = 0 V, VSW = 0 V | 5 |
| Output Leakage Current | IL | | 0.1 | 3 | µA | VSW = -1 V | 5 |
| Switch On-Resistance (SO PowerPAD-8) | RDS(ON) | | 0.1 | 0.16 | Ω | SO PowerPAD-8 Package | 5 |
| Switch On-Resistance (SO PowerPAD-8) over temperature | RDS(ON) | | | 0.2 | Ω | SO PowerPAD-8 Package, -40°C ≤ TJ ≤ 125°C | 5 |
| Oscillator Frequency over temperature | fO | 400 | | 600 | kHz | -40°C ≤ TJ ≤ 125°C | 5 |
| Enable Threshold Voltage (falling) over temperature | VEN | 1.3 | | 1.9 | V | Falling, -40°C ≤ TJ ≤ 125°C | 5 |
| Maximum Synchronization Frequency | FSYNC | | | 1 | MHz | VSYNC = 3.5 V, 50% duty-cycle | 5 |
| Oscillator Frequency | fO | | 500 | | kHz | | 5 |
| VIN to GND | | | | 43 | V | | 4 |
| EN Pin Voltage | | -0.5 | | 6 | V | | 4 |
| RT/SYNC Pin Voltage | | -0.5 | | 7 | V | | 4 |
| SW to GND | | -5 | | | V | DC voltage; extended -10 V limit for pulses up to 50 ns | 4 |
| FB Pin Voltage | | -0.5 | | 7 | V | | 4 |
| Junction Temperature | | | | 150 | °C | | 4 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 4 |
| Electrostatic discharge (HBM) | V(ESD) | -2 | | 2 | kV | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001 | 4 |
| VIN Supply Voltage | VIN | 4.5 | | 42 | V | | 4 |
| Junction Temperature Range | | -40 | | 125 | °C | | 4 |
| Junction-to-ambient thermal resistance (SO PowerPAD-8, DDA) | RθJA | | 60 | | °C/W | Mounted to 1 square inch of copper | 4 |
## CAD (KiCad official)
- Symbol: `LM22670MRX-5.0`
- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm`
- 3D model: SOIC-8-EP (KiCad packages3D, STEP)
- 3D model files: `lm22670mrx-5-0-etched.step` / `lm22670mrx-5-0-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm22670mrx-5-0.step` / `lm22670mrx-5-0.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm22670.pdf) (38 pp, sha256 `d2ef244f2c5ecf68`, retrieved 2026-11-10, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm22670mrx-5-0-datasheet.pdf)