main
Ray
lm224adr: laser-etched CAD + chip hero (factory 2.0.0 backfill)
8f300c9
LM224ADR
Texas Instruments · Operational Amplifier · SOIC-14
LM224ADR from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Output of op amp 1. Class-AB output stage capable of sourcing and sinking current; short-circuit protected to VCC-. |
| 2 | 1IN- | input | Inverting input of op amp 1. High-impedance BJT input with typical input bias current of 20 nA. |
| 3 | 1IN+ | input | Non-inverting input of op amp 1. Common-mode range extends to V- (VCC-), allowing single-supply operation down to ground. |
| 4 | VCC+ | power_in | Positive (highest) supply rail. Operating range 3 V to 32 V (LM224A); absolute maximum 32 V. Bypass locally with a 100 nF ceramic capacitor to VCC-. |
| 5 | 2IN+ | input | Non-inverting input of op amp 2. Common-mode range extends to V- (VCC-), allowing single-supply operation down to ground. |
| 6 | 2IN- | input | Inverting input of op amp 2. High-impedance BJT input with typical input bias current of 20 nA. |
| 7 | 2OUT | output | Output of op amp 2. Class-AB output stage capable of sourcing and sinking current; short-circuit protected to VCC-. |
| 8 | 3OUT | output | Output of op amp 3. Class-AB output stage capable of sourcing and sinking current; short-circuit protected to VCC-. |
| 9 | 3IN- | input | Inverting input of op amp 3. High-impedance BJT input with typical input bias current of 20 nA. |
| 10 | 3IN+ | input | Non-inverting input of op amp 3. Common-mode range extends to V- (VCC-), allowing single-supply operation down to ground. |
| 11 | VCC- | power_in | Negative (lowest) supply rail or ground for single-supply operation. Tie to system ground in single-supply designs. |
| 12 | 4IN+ | input | Non-inverting input of op amp 4. Common-mode range extends to V- (VCC-), allowing single-supply operation down to ground. |
| 13 | 4IN- | input | Inverting input of op amp 4. High-impedance BJT input with typical input bias current of 20 nA. |
| 14 | 4OUT | output | Output of op amp 4. Class-AB output stage capable of sourcing and sinking current; short-circuit protected to VCC-. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-14 |
| Category | Op-amp/Cmp |
| Pins | 14 |
Ordering variants
Same part, different packaging or reel option.
LM224ADRDLM224ADRLM224ADRPWLM224ADRPWRLM224ADRNLM224ADRNSLM224ADRNSRLM224ADRDBLM224ADRDBRLM224ADRJLM224ADRWLM224ADRFKLM224ADRRTELM224ADRRTER
CAD (KiCad official)
- Symbol:
LM224ADR - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
lm224adr-etched.step/lm224adr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm224adr.step/lm224adr.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
lm224adr.step |
195 KB | You want the bare part, or you mark your own boards. |
lm224adr-etched.step |
1.9 MB | You want the part with LM224ADR already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 483 faces against 237 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (65 pp, sha256
a4eda7c3a0236e96, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM224ADR
**Texas Instruments** · Operational Amplifier · SOIC-14
LM224ADR from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Output of op amp 1. Class-AB output stage capable of sourcing and sinking current; short-circuit protected to VCC-. |
| 2 | 1IN- | input | Inverting input of op amp 1. High-impedance BJT input with typical input bias current of 20 nA. |
| 3 | 1IN+ | input | Non-inverting input of op amp 1. Common-mode range extends to V- (VCC-), allowing single-supply operation down to ground. |
| 4 | VCC+ | power_in | Positive (highest) supply rail. Operating range 3 V to 32 V (LM224A); absolute maximum 32 V. Bypass locally with a 100 nF ceramic capacitor to VCC-. |
| 5 | 2IN+ | input | Non-inverting input of op amp 2. Common-mode range extends to V- (VCC-), allowing single-supply operation down to ground. |
| 6 | 2IN- | input | Inverting input of op amp 2. High-impedance BJT input with typical input bias current of 20 nA. |
| 7 | 2OUT | output | Output of op amp 2. Class-AB output stage capable of sourcing and sinking current; short-circuit protected to VCC-. |
| 8 | 3OUT | output | Output of op amp 3. Class-AB output stage capable of sourcing and sinking current; short-circuit protected to VCC-. |
| 9 | 3IN- | input | Inverting input of op amp 3. High-impedance BJT input with typical input bias current of 20 nA. |
| 10 | 3IN+ | input | Non-inverting input of op amp 3. Common-mode range extends to V- (VCC-), allowing single-supply operation down to ground. |
| 11 | VCC- | power_in | Negative (lowest) supply rail or ground for single-supply operation. Tie to system ground in single-supply designs. |
| 12 | 4IN+ | input | Non-inverting input of op amp 4. Common-mode range extends to V- (VCC-), allowing single-supply operation down to ground. |
| 13 | 4IN- | input | Inverting input of op amp 4. High-impedance BJT input with typical input bias current of 20 nA. |
| 14 | 4OUT | output | Output of op amp 4. Class-AB output stage capable of sourcing and sinking current; short-circuit protected to VCC-. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-14 |
| Category | Op-amp/Cmp |
| Pins | 14 |
## Ordering variants
Same part, different packaging or reel option.
- `LM224ADRD`
- `LM224ADR`
- `LM224ADRPW`
- `LM224ADRPWR`
- `LM224ADRN`
- `LM224ADRNS`
- `LM224ADRNSR`
- `LM224ADRDB`
- `LM224ADRDBR`
- `LM224ADRJ`
- `LM224ADRW`
- `LM224ADRFK`
- `LM224ADRRTE`
- `LM224ADRRTER`
## CAD (KiCad official)
- Symbol: `LM224ADR`
- Footprint: `Package_SO:SOIC-14_3.9x8.7mm_P1.27mm`
- 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files: `lm224adr-etched.step` / `lm224adr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm224adr.step` / `lm224adr.glb` are the bare package body.
## 3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
| [`lm224adr.step`](lm224adr.step) | 195 KB | You want the bare part, or you mark your own boards. |
| [`lm224adr-etched.step`](lm224adr-etched.step) | 1.9 MB | You want the part with `LM224ADR` already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a
texture or a decal: 483 faces against 237 in the bare model. It
survives export, section views, and rendering in any CAD tool, and it drops straight
into KiCad or Fusion with no extra setup.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm224a.pdf) (65 pp, sha256 `a4eda7c3a0236e96`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm224adr-datasheet.pdf)