main
History Download
Ray lm219dt: specified limits as data (metadata.characteristics, 31 rows from the datasheet) 8c74cb0

LM219DT

STMicroelectronics · Comparators · SOIC-14

LM219DT from STMicroelectronics, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No internal connection. Leave floating or tie to a nearby quiet net; do not use as a routing via.
2 NC unconnected No internal connection. Leave floating or tie to a nearby quiet net; do not use as a routing via.
3 GND1 power_in Ground return for comparator 1. Separate from GND2 so channel 1's inputs and open-collector output can be referenced to an isolated ground.
4 -IN1 input Inverting input of comparator 1. Analog input; input bias current 500 nA typ (1 µA max over temp), differential input voltage rated ±5 V, common-mode range typically ±13 V at VCC=±15 V.
5 +IN1 input Non-inverting input of comparator 1. Analog input; input bias current 500 nA typ (1 µA max over temp), differential input voltage rated ±5 V, common-mode range typically ±13 V at VCC=±15 V.
6 VCC- power_in Negative supply rail. Tie to 0 V for single-supply operation from +5 V, or down to -15 V for dual-supply operation. Absolute max -25 V.
7 OUT2 output Comparator 2 output. Open-collector NPN referenced to GND2; requires an external pull-up to a rail up to +36 V above VCC-. Sink capability up to 25 mA (VOL ≤ 1.5 V at 25 mA, ≤ 0.4 V at 3.2 mA); TTL-compatible.
8 GND2 power_in Ground return for comparator 2. Separate from GND1 so channel 2's inputs and open-collector output can be referenced to an isolated ground.
9 +IN2 input Non-inverting input of comparator 2. Analog input; input bias current 500 nA typ (1 µA max over temp), differential input voltage rated ±5 V, common-mode range typically ±13 V at VCC=±15 V.
10 -IN2 input Inverting input of comparator 2. Analog input; input bias current 500 nA typ (1 µA max over temp), differential input voltage rated ±5 V, common-mode range typically ±13 V at VCC=±15 V.
11 VCC+ power_in Positive supply rail. Range +5 V (single supply, with VCC- = 0 V) up to +15 V (dual supply). Absolute max +18 V. Positive supply current 8 mA typ / 11.5 mA max at ±15 V.
12 OUT1 output Comparator 1 output. Open-collector NPN referenced to GND1; requires an external pull-up to a rail up to +36 V above VCC-. Sink capability up to 25 mA (VOL ≤ 1.5 V at 25 mA, ≤ 0.4 V at 3.2 mA); TTL-compatible.
13 NC unconnected No internal connection. Leave floating or tie to a nearby quiet net; do not use as a routing via.
14 NC unconnected No internal connection. Leave floating or tie to a nearby quiet net; do not use as a routing via.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOIC-14
Category Op-amp/Cmp
Pins 14

Ordering variants

  • LM219DTD
  • LM219DT
  • LM219DTN

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage (Rs ≤ 5 kΩ), Tamb = +25 °C Vio 0.7 4 mV Rs ≤ 5 kΩ, VCC = ±15 V, Tamb = +25 °C 5
Input offset voltage (Rs ≤ 5 kΩ), Tmin ≤ Tamb ≤ Tmax Vio 7 mV Rs ≤ 5 kΩ, Tmin ≤ Tamb ≤ Tmax 5
Input offset current, Tamb = +25 °C Iio 30 75 nA VCC = ±15 V, Tamb = +25 °C 5
Input offset current, Tmin ≤ Tamb ≤ Tmax Iio 100 nA Tmin ≤ Tamb ≤ Tmax 5
Input bias current, Tamb = +25 °C Iib 150 500 nA VCC = ±15 V, Tamb = +25 °C 5
Input bias current, Tmin ≤ Tamb ≤ Tmax Iib 1000 nA Tmin ≤ Tamb ≤ Tmax 5
Large signal voltage gain Avd 10 40 V/mV VCC = ±15 V, Tamb = +25 °C 5
Positive supply current, VCC = ±15 V ICC+ 8 11.5 mA VCC = ±15 V 5
Positive supply current, VCC+ = +5 V, VCC- = 0 V ICC+ 4.3 mA VCC+ = +5 V, VCC- = 0 V 5
Negative supply current ICC- 3 4.5 mA VCC = ±15 V 5
Input common mode voltage range, VCC = ±15 V Vicm -12 13 V VCC = ±15 V (printed ±12 min, ±13 typ) 5
Input common mode voltage range, VCC+ = +5 V, VCC- = 0 V Vicm 1 3 V VCC+ = +5 V, VCC- = 0 V 5
Low level output voltage, Vi ≤ -5 mV VOL 0.75 1.5 V Io = 25 mA, Vi ≤ -5 mV 5
Low level output voltage, Vi ≤ -10 mV VOL 0.23 0.4 V Io = 25 mA, Vi ≤ -10 mV 5
High level output current, Vi ≥ 5 mV IOH 0.2 1 μA Vo = +35 V, Vi ≥ 5 mV, Tamb = +25 °C 5
High level output current, Tmin ≤ Tamb ≤ Tmax, Vi ≥ 5 mV IOH 2 10 μA Vo = +35 V, Tmin ≤ Tamb ≤ Tmax, Vi ≥ 5 mV 5
Response time tres 80 ns 100 mV input step with 5 mV overdrive 5
Supply voltage VCC 5 15 V Single 5 V up to ±15 V supplies 4
Operating free-air temperature range, LM219 Toper -45 105 °C LM219 4
Output to negative supply voltage Vo - VCC- 36 V 4
Negative supply voltage VCC- -25 V 4
Positive supply voltage VCC+ 18 V 4
Differential input voltage Vid -5 5 V 4
Input voltage Vi -15 15 V For supply voltages lower than ±15 V, the absolute maximum input voltage equals the supply voltage 4
Maximum junction temperature Tj 150 °C 4
Storage temperature range Tstg -65 150 °C 4
ESD HBM (human body model) 400 V 100 pF discharged through 1.5 kΩ 4
ESD MM (machine model) 100 V 200 pF, no external series resistor 4
ESD CDM (charged device model) 1500 V All pins charged together, discharged through one pin 4
Thermal resistance junction to ambient, SO-14 Rthja 105 °C/W Rth are typical values 4
Thermal resistance junction to case, SO-14 Rthjc 31 °C/W Rth are typical values 4

CAD (KiCad official)

  • Symbol: LM219DT
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOIC-14 (KiCad packages3D, STEP)
  • 3D model files: lm219dt-etched.step / lm219dt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm219dt.step / lm219dt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (None pp, sha256 e56b45c82b85bed4, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF