component
LM211MM
Public Made by Adomby adom
HGSEMI Comparators, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM211MM
HGSEMI · Comparators · MSOP-8
LM211MM from HGSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin; the output can be referenced to ground, and with GND used as the output reference the input polarity is reversed. |
| 2 | IN+ | input | Non-inverting (+) comparator input, isolated from system ground; input voltage rated 15 V with ±15 V supplies and differential voltage up to 30 V. |
| 3 | IN- | input | Inverting (-) comparator input, isolated from system ground; input voltage rated 15 V with ±15 V supplies and differential voltage up to 30 V. |
| 4 | VEE | power_in | Negative supply; total VCC+VEE is limited to 36 V and ground to VEE to 30 V. |
| 5 | BALANCE | passive | Balance pin for input offset voltage adjustment. |
| 6 | BALANCE/STROBE | input | Shared balance and strobe pin; must not be tied directly to ground and needs to be driven with 3 mA to 5 mA, with strobe voltage limited to VCC to VCC-5 V. |
| 7 | OUTPUT | output | Comparator output that can be referenced to ground, VCC or VEE to drive DTL, RTL, TTL or MOS logic, and can switch up to 50 V at 50 mA (VO-VEE max 50 V for LM211, 40 V for LM311). |
| 8 | VCC | power_in | Positive supply; operates from a single 5 V to 30 V supply or ±15 V dual supply, with VCC+VEE max 36 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | MSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage, RS ≤ 50 kΩ | VIO | 0.7 | 3 | mV | RS ≤ 50 kΩ, TA = +25°C | 4 | |
| Input offset voltage, RS ≤ 50 kΩ, full temperature range | VIO | 4 | mV | RS ≤ 50 kΩ, Tlow ≤ TA ≤ Thigh | 4 | ||
| Input bias current (IIO row as printed) | IIO | 1.7 | 10 | nA | TA = +25°C | 4 | |
| Input bias current (IIO row as printed), full temperature range | IIO | 20 | nA | Tlow ≤ TA ≤ Thigh | 4 | ||
| Input bias current (IIB row as printed) | IIB | 45 | 100 | nA | TA = +25°C | 4 | |
| Input bias current (IIB row as printed), full temperature range | IIB | 150 | nA | Tlow ≤ TA ≤ Thigh | 4 | ||
| Voltage gain | AV | 40 | 200 | V/mV | VCC = +15 V, VEE = -15 V, TA = 25°C (table header) | 4 | |
| Positive supply current | ICC | 2.4 | 6 | mA | VCC = +15 V, VEE = -15 V, TA = 25°C (table header) | 4 | |
| Negative supply current | IEE | -1.3 | -5 | mA | VCC = +15 V, VEE = -15 V, TA = 25°C (table header) | 4 | |
| Total supply voltage | VCC+VEE | 36 | Vdc | TA = +25°C (table header) | 3 | ||
| Output to negative supply voltage | VO - VEE | 50 | Vdc | TA = +25°C (table header) | 3 | ||
| Ground to negative supply voltage | VEE | 30 | Vdc | TA = +25°C (table header) | 3 | ||
| Input differential voltage | VID | 30 | Vdc | TA = +25°C (table header) | 3 | ||
| Input voltage | Vin | 15 | Vdc | Note 2: rating for ±15 V supplies; TA = +25°C (table header) | 3 | ||
| Operating ambient temperature | TA | -40 | 85 | °C | LM211 grade | 3 | |
| Operating junction temperature (row labelled Tstg) | Tstg | -65 | 150 | °C | 3 | ||
| Lead temperature (soldering) | TLEAD | 260 | °C | soldering, 10 s | 3 | ||
| Supply voltage (single supply) | 5 | 30 | V | Product description: single supply 5 V to 30 V, or dual supply ±15 V | 1 |
CAD (KiCad official)
- Symbol:
LM211MM - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
lm211mm-etched.step/lm211mm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm211mm.step/lm211mm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (10 pp, sha256
061ce243af0d55f4, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).