main
Ray Publish 0.1.0 8136f67
{
  "slug": "lm20cim7",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Temperature Sensors, SC-70-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "sensors",
    "lm20cim7",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm20cim7.kicad_sym",
    "lm20cim7.kicad_mod",
    "lm20cim7.glb",
    "lm20cim7.step",
    "lm20cim7.lbr",
    "docs/hero.png",
    "docs/lm20cim7-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lm20cim7-hero.glb",
    "lm20cim7-hero.overlay.json",
    "lm20cim7-etched.glb"
  ],
  "component": {
    "mpn": "LM20CIM7",
    "manufacturer": "Texas Instruments",
    "package": "SC-70-5",
    "pin_count": 5,
    "category": "Sensors",
    "subcategory": "Temperature Sensors",
    "datasheet": "https://www.ti.com/lit/ds/symlink/lm20.pdf",
    "parts": {
      "symbol": "lm20cim7.kicad_sym",
      "footprint": "lm20cim7.kicad_mod",
      "model_3d": "lm20cim7-hero.glb",
      "model_3d_plain": "lm20cim7-etched.glb",
      "model_3d_step": "lm20cim7-etched.step",
      "model_3d_step_plain": "lm20cim7.step",
      "lbr": "lm20cim7.lbr"
    },
    "distributor_links": {
      "lcsc": "C2878871",
      "mouser": "926-LM20CIM7"
    },
    "distributor_check": {
      "checked_at": "2026-11-10T08:16:21Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "deferred",
        "error": "shared DigiKey quota guard: 993 calls left today"
      },
      "mouser": {
        "pn": "926-LM20CIM7",
        "status": "found",
        "lifecycle": "Obsolete"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "NC",
        "type": "unconnected",
        "description": "NC pin must be left floating or grounded, and other signal traces must not be connected to this pin."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Device substrate and die attach paddle, connected to the power supply negative terminal; for optimum thermal conductivity to the PC board ground plane this pin must be grounded, though the datasheet also states it may be left floating."
      },
      {
        "number": "3",
        "name": "VO",
        "type": "output",
        "description": "Temperature sensor analog output, which the amplifier can source 16 µA and sink 1 µA."
      },
      {
        "number": "4",
        "name": "V+",
        "type": "power_in",
        "description": "Positive power supply pin, with a recommended supply range of 2.4 V to 5.5 V."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground pin, which must be connected to the power supply negative terminal."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet pin description is internally inconsistent: it says pin 2 must be grounded for optimum; Pin 1 is NC (no internal connection) and is typed as unconnected; the datasheet allows it to be floa; The LM20CIM7 MPN is not listed by its exact name in the pin table. The orderable addendum lists LM20"
        ],
        "pages_sent": 26,
        "cost_usd": 0.1,
        "at": "2026-11-10T08:16:15"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/lm20.pdf",
        "pages": 26,
        "sha256": "7812936c4d05bae2",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 5,
        "described": 5,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm20cim7.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.1,
          2.0,
          1.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2860de5b7b085919ff6e952148353f928798588d9f544dc69430545aff2ba908",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm20cim7-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.1,
          2.0,
          1.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a16bb7d971cf5f1cab28c3686985307f3c9e2829ef98d325bb8ebb96ffd04331",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "DCK0005A",
      "source_page": 22,
      "D": {
        "nom_mm": 2.0,
        "range_mm": [
          1.85,
          2.15
        ]
      },
      "E1": {
        "nom_mm": 1.25,
        "range_mm": [
          1.1,
          1.4
        ]
      },
      "E": {
        "nom_mm": 2.1,
        "range_mm": [
          1.8,
          2.4
        ]
      },
      "e": {
        "nom_mm": 0.65,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.1,
        "range_mm": [
          null,
          1.1
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "lm20cim7.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}