main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lm193qt: viewers rendered from the public page · Ray
lm193qt-etched.glb lm193qt: factory component page (tier=mfr) · Ray
lm193qt-etched.step lm193qt: factory component page (tier=mfr) · Ray
lm193qt-hero.glb lm193qt: hero GLB from the etched model (keeps the MPN mark) · Ray
lm193qt-hero.overlay.json lm193qt: hero GLB from the etched model (keeps the MPN mark) · Ray
lm193qt.glb Publish 0.1.0 · Ray
lm193qt.kicad_mod Publish 0.1.0 · Ray
lm193qt.kicad_sym Publish 0.1.0 · Ray
lm193qt.lbr Publish 0.1.0 · Ray
lm193qt.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

LM193QT

STMicroelectronics · Comparators · DFN-8(2x2)

LM193QT from STMicroelectronics, in a DFN-8(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Out1 output Output of comparator 1, with low-level output voltage of 80 mV typ. (400 mV max.) at Isink = 4 mA and output sink current of 6 mA min. at Vid = 1 V, Vo = 1.5 V.
2 In1- input Inverting input of comparator 1; the low input voltage state must not be less than -0.3 V (or 0.3 V below the negative supply, if used).
3 In1+ input Non-inverting input of comparator 1; the common-mode input range is 0 V to (VCC+) - 1.5 V at Tamb = 25 °C, and it includes ground.
4 Vcc- power_in Negative supply pin (ground in single-supply operation); the total supply voltage (VCC+) - (VCC-) is specified from 2 V to 36 V.
5 In2+ input Non-inverting input of comparator 2; the common-mode input range is 0 V to (VCC+) - 1.5 V at Tamb = 25 °C, and it includes ground.
6 In2- input Inverting input of comparator 2; the low input voltage state must not be less than -0.3 V (or 0.3 V below the negative supply, if used).
7 Out2 output Output of comparator 2, with low-level output voltage of 80 mV typ. (400 mV max.) at Isink = 4 mA and output sink current of 6 mA min. at Vid = 1 V, Vo = 1.5 V.
8 Vcc+ power_in Positive supply pin; the total supply voltage (VCC+) - (VCC-) is specified from 2 V to 36 V.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package DFN-8(2x2)
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC (absolute maximum) VCC 36 V Printed as ±18 or 36 V 4
Differential input voltage Vid Vid -36 36 V LM193, LM293, LM393 4
Maximum junction temperature Tj Tj 150 °C 4
Storage temperature range Tstg Tstg -65 150 °C 4
Thermal resistance junction to ambient Rthja (DFN8 2x2) Rthja 57 °C/W DFN8 2x2; footnote 2: values are typical 4
Supply voltage VCC (recommended) VCC 2 36 V (VCC +) - (VCC -) 5
Common mode input voltage range Vicm (max (VCC+)-1.5 V) Vicm 0 V VCC + = 30 V, Tamb = 25 °C 5
Common mode input voltage range Vicm (max (VCC+)-2 V) Vicm 0 V VCC + = 30 V, Tmin ≤ Tamb ≤ Tmax 5
Operating free-air temperature range Toper (LM193) Toper -55 125 °C LM193 5
Input offset voltage Vio Vio 1 5 mV Vo = 1.4 V, Rs = 0, VCC+ from 5 V to 30 V, full common-mode range (footnote 1) 6
Input offset voltage Vio Vio 9 mV Tmin ≤ Tamb ≤ Tmax 6
Input offset current Iio Iio 3 50 nA 6
Input offset current Iio Iio 150 nA Tmin ≤ Tamb ≤ Tmax 6
Input bias current Iib (I+ or I-) Iib 20 250 nA 6
Input bias current Iib (I+ or I-) Iib 400 nA Tmin ≤ Tamb ≤ Tmax 6
Large signal voltage gain Avd Avd 50 200 V/mV VCC = 15 V, RL = 15 kΩ, Vo = 1 V to 11 V 6
Supply current ICC (all comparators) ICC 0.45 1 mA VCC = 5 V, no load 6
Supply current ICC (all comparators) ICC 0.6 2.5 mA VCC = 30 V, no load 6
Low-level output voltage VOL VOL 80 400 mV Vid = -1 V, Isink = 4 mA 6
Low-level output voltage VOL VOL 700 mV Tmin ≤ Tamb ≤ Tmax 6
High-level output current IOH IOH 1 μA Tmin ≤ Tamb ≤ Tmax 6
Output sink current Isink Isink 6 18 mA Vid = 1 V, Vo = 1.5 V 6
High-level output current IOH IOH 0.1 nA VCC = Vo = 30 V, Vid = 1 V 6
Response time tre tre 1.3 μs RL = 5.1 kΩ connected to VCC+; 100 mV input step with 5 mV overdrive (footnote 4) 6
Large signal response time trel trel 300 ns RL = 5.1 kΩ connected to VCC+, TTL input, V(ref) = 1.4 V 6

CAD (KiCad official)

  • Symbol: LM193QT
  • Footprint: Package_DFN_QFN:DFN-8_2x2mm_P0.5mm
  • 3D model: DFN-8(2x2), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.55 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lm193qt-etched.step / lm193qt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm193qt.step / lm193qt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (18 pp, sha256 31d06d834156345d, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF