main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs lm158dt: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lm158dt: viewers · Ray
lm158dt-etched.fit.json lm158dt: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm158dt-etched.glb lm158dt: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm158dt-etched.step lm158dt: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm158dt.glb Publish 0.1.0 · Ray
lm158dt.kicad_mod Publish 0.1.0 · Ray
lm158dt.kicad_sym Publish 0.1.0 · Ray
lm158dt.lbr Publish 0.1.0 · Ray
lm158dt.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
page.json lm158dt: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md lm158dt: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

LM158DT

STMicroelectronics · Operational Amplifier · SO-8

LM158DT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Out1 output Output of op-amp channel 1. Push-pull output capable of sinking/sourcing; output swing 0 V to (Vcc+ − 1.5 V). Output short-circuit current approximately 40 mA independent of Vcc magnitude.
2 In1- input Inverting input of op-amp channel 1. High-impedance BJT input; typical input bias current 20 nA, input offset voltage 2 mV. Absolute input voltage range −0.3 V to 32 V; differential input voltage up to ±32 V.
3 In1+ input Non-inverting input of op-amp channel 1. Common-mode input voltage range includes the negative rail (0 V / Vcc−), enabling single-supply operation with ground-referenced signals.
4 Vcc- power_in Negative supply / ground pin, shared by both op-amp channels. Tie to GND in single-supply operation, or to the negative rail in split-supply operation. Total supply voltage 3 V to 32 V (single) or ±1.5 V to ±16 V (split).
5 In2+ input Non-inverting input of op-amp channel 2. Common-mode input voltage range includes the negative rail, matching channel 1.
6 In2- input Inverting input of op-amp channel 2. High-impedance BJT input with characteristics matching channel 1 (typ. 20 nA bias, 2 mV offset).
7 Out2 output Output of op-amp channel 2. Same drive characteristics as Out1; short-circuit protected.
8 Vcc+ power_in Positive supply pin, shared by both op-amp channels. Absolute maximum ±16 V (split) or 32 V (single-supply); recommended operating up to 30 V. Supply current is very low and largely independent of supply voltage.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SO-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • LM158DT
  • LM158DTADT
  • LM158DTAYDT
  • LM158DTYDT
  • LM158DTST
  • LM158DTAST
  • LM158DTQT
  • LM158DTPT
  • LM158DTAPT

CAD (KiCad official)

  • Symbol: LM158DT
  • Footprint: Package_SO:TI_SO-PowerPAD-8
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: lm158dt-etched.step / lm158dt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm158dt.step / lm158dt.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
lm158dt.step 123 KB You want the bare part, or you mark your own boards.
lm158dt-etched.step 1.4 MB You want the part with LM158DT already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 367 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (25 pp, sha256 40a2550bed90848d, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF