← Commit history
page.json+9−6@@ -32,25 +32,25 @@ "number": "1", "name": "Out1", "type": "output",- "description": "Output of op-amp channel 1. Push-pull output capable of sinking/sourcing; output swing 0 V to (Vcc+ \u2212 1.5 V). Output short-circuit current approximately 40 mA independent of Vcc magnitude."+ "description": "Output of op-amp channel 1. Push-pull output capable of sinking/sourcing; output swing 0 V to (Vcc+ − 1.5 V). Output short-circuit current approximately 40 mA independent of Vcc magnitude." }, { "number": "2", "name": "In1-", "type": "input",- "description": "Inverting input of op-amp channel 1. High-impedance BJT input; typical input bias current 20 nA, input offset voltage 2 mV. Absolute input voltage range \u22120.3 V to 32 V; differential input voltage up to \u00b132 V."+ "description": "Inverting input of op-amp channel 1. High-impedance BJT input; typical input bias current 20 nA, input offset voltage 2 mV. Absolute input voltage range −0.3 V to 32 V; differential input voltage up to ±32 V." }, { "number": "3", "name": "In1+", "type": "input",- "description": "Non-inverting input of op-amp channel 1. Common-mode input voltage range includes the negative rail (0 V / Vcc\u2212), enabling single-supply operation with ground-referenced signals."+ "description": "Non-inverting input of op-amp channel 1. Common-mode input voltage range includes the negative rail (0 V / Vcc−), enabling single-supply operation with ground-referenced signals." }, { "number": "4", "name": "Vcc-", "type": "power_in",- "description": "Negative supply / ground pin, shared by both op-amp channels. Tie to GND in single-supply operation, or to the negative rail in split-supply operation. Total supply voltage 3 V to 32 V (single) or \u00b11.5 V to \u00b116 V (split)."+ "description": "Negative supply / ground pin, shared by both op-amp channels. Tie to GND in single-supply operation, or to the negative rail in split-supply operation. Total supply voltage 3 V to 32 V (single) or ±1.5 V to ±16 V (split)." }, { "number": "5",@@ -74,7 +74,7 @@ "number": "8", "name": "Vcc+", "type": "power_in",- "description": "Positive supply pin, shared by both op-amp channels. Absolute maximum \u00b116 V (split) or 32 V (single-supply); recommended operating up to 30 V. Supply current is very low and largely independent of supply voltage."+ "description": "Positive supply pin, shared by both op-amp channels. Absolute maximum ±16 V (split) or 32 V (single-supply); recommended operating up to 30 V. Supply current is very low and largely independent of supply voltage." } ], "provenance": {@@ -138,5 +138,8 @@ "docs/lm158dt-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }