main
History Download
Ray Publish 0.1.0 4a95878

LM13700N

HGSEMI · Operational Amplifier · DIP-16

LM13700N from HGSEMI, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Amp Bias Input input Amplifier bias current (Iabc) input that sets the transconductance of its channel; the absolute maximum Iabc is 2 mA.
2 Diode Bias input Linearizing diode bias input; the absolute maximum diode bias current Id is 2 mA, and the application section recommends Id = 1 mA.
3 Input(+) input Non-inverting input of the transconductance amplifier; the differential input voltage is rated to ±5 V.
4 Input(-) input Inverting input of the transconductance amplifier; the differential input voltage is rated to ±5 V.
5 Output output Unbuffered transconductance amplifier output, which the datasheet states is protected against continuous short-circuit to ground.
6 Vs- power_in Negative supply pin; dual-supply range is -4.75 V to -16 V, and the absolute maximum supply is 36 V dc or ±18 V.
7 Buffer Input input High-impedance input of the output buffer; buffer input current is typically 0.5 µA and at most 2 µA.
8 Buffer Output output Output of the Darlington-type buffer, which can drive up to 20 mA.
9 Buffer Output output Output of the Darlington-type buffer, which can drive up to 20 mA.
10 Buffer Input input High-impedance input of the output buffer; buffer input current is typically 0.5 µA and at most 2 µA.
11 Vs+ power_in Positive supply pin; single-supply range is 9.5 V to 32 V and dual-supply range is +4.75 V to +16 V.
12 Output output Unbuffered transconductance amplifier output, which the datasheet states is protected against continuous short-circuit to ground.
13 Input(-) input Inverting input of the transconductance amplifier; the differential input voltage is rated to ±5 V.
14 Input(+) input Non-inverting input of the transconductance amplifier; the differential input voltage is rated to ±5 V.
15 Diode Bias input Linearizing diode bias input; the absolute maximum diode bias current Id is 2 mA, and the application section recommends Id = 1 mA.
16 Amp Bias Input input Amplifier bias current (Iabc) input that sets the transconductance of its channel; the absolute maximum Iabc is 2 mA.

Key specifications

Parameter Value
Manufacturer HGSEMI
Package DIP-16
Category Amplifiers/Comparators
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (single supply or dual ±18 V) 36 V 36 V DC or ±18 V 2
Differential input voltage -5 5 V ±5 V as printed 2
Diode bias current Id 2 mA 2
Amp bias current Iabc 2 mA 2
Buffer output current 20 mA 2
Power dissipation 570 mW Ta=25℃ 2
Storage temperature -65 150 ℃ 2
Vs single supply Vs 9.5 32 V single supply 3
Vs+ dual supply Vs+ 4.75 16 V dual supply 3
Vs- dual supply Vs- -16 -4.75 V dual supply 3
Operating temperature range 0 70 ℃ 3
Input offset voltage Vios 0.56 3 mV Over specified temperature range 3
Input offset voltage Vios 1.12 4 mV Iabc=5uA 3
Input offset voltage incl. diode Vios_D 0.45 5 mV Diode bias current Id=500uA 3
Input offset voltage change △Vios 0.5 3 mV 5uA≤Iabc≤500uA 3
Input offset current Iios 0.033 0.6 uA 3
Input bias current Iib 0.116 5 uA 3
Input bias current Iib 0.22 8 uA Over specified temperature range 3
Forward transconductance gm gm 6700 9600 13000 uS 取 100 和 25mV 算 3
Forward transconductance gm over temperature gm 5400 uS Over specified temperature range 3
gm tracking gm_t 0.3 dB 3
Peak output current Ipk 4.3 5 uA RL=0,Iabc=5uA 3
Peak output current Ipk 450 500 650 uA RL=0,Iabc=500uA 3
Peak output current Ipk 300 uA RL=0 3
Supply current (both channels) Icc 2.2 mA Iabc=500uA, dual channel (test box measurement) 3
Common-mode rejection ratio CMRR 80 110 dB 3
Common-mode range -12 13.5 12 V 3
Crosstalk crosstalk 100 dB (1), 20Hz<f<20kHz 3
Differential input current Idin 0.02 100 nA Iabc=0, input=±4V 3
Leakage current Ileak 0.2 100 nA Iabc=0 3
Input impedance Zin 10 26 kΩ 3
Open-loop bandwidth 2 MHz 3
Slew rate 4.3 50 V/uS Unity-gain compensated (单位增益补偿) 3
Buffer input current Ibin 0.5 2 uA (1) 3
Peak buffer output voltage Ipkout_buffer 10 V (1) 3
Positive peak output voltage VOP 12 14.2 V R=∞, 5uA≤Iabc≤500uA 3
Negative peak output voltage VON -12 -14.2 V R=∞, 5uA≤Iabc≤500uA 3
Offset voltage sensitivity, forward △Vios/△V+ 20 150 uV/V 3
Offset voltage sensitivity, reverse △Vios/△V- 20 150 uV/V 3

CAD (KiCad official)

  • Symbol: LM13700N
  • Footprint: Package_DIP:DIP-16_W7.62mm
  • 3D model: DIP-16 (KiCad packages3D, STEP)
  • 3D model files: lm13700n-etched.step / lm13700n-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm13700n.step / lm13700n.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (15 pp, sha256 8fd0bb1ba4daba9c, retrieved 2026-11-11, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF