component
LM1117DT-5.0
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TO-252. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM1117DT-5.0
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-252
LM1117DT-5.0 from Texas Instruments, in a TO-252. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ/GND | power_in | Adjust pin for adjustable output option; ground pin for fixed output option, so for the 5.0 V fixed version this pin is GND. |
| 2 | VOUT | power_out | Output voltage pin for the regulator, rated for up to 800 mA of output current per the datasheet. |
| 3 | VIN | power_in | Input voltage pin for the regulator; recommended VIN to GND is 15 V maximum and the absolute maximum is 20 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TO-252 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VOUT | 4.95 | 5 | 5.05 | V | IOUT = 10 mA, VIN = 7 V, TJ = 25°C | 5 |
| Output voltage | VOUT | 4.9 | 5.1 | V | 0 ≤ IOUT ≤ 800 mA, 6.5 V ≤ VIN ≤ 12 V, over junction temperature range 0°C to 125°C | 5 | |
| Line regulation | ΔVOUT | 10 | mV | IOUT = 0 mA, 6.5 V ≤ VIN ≤ 15 V, over junction temperature range 0°C to 125°C | 5 | ||
| Load regulation | ΔVOUT | 15 | mV | VIN = 6.5 V, 0 ≤ IOUT ≤ 800 mA, over junction temperature range 0°C to 125°C | 5 | ||
| Dropout voltage | VIN-VOUT | 1.2 | V | IOUT = 100 mA, over junction temperature range 0°C to 125°C | 6 | ||
| Dropout voltage | VIN-VOUT | 1.25 | V | IOUT = 500 mA, over junction temperature range 0°C to 125°C | 6 | ||
| Dropout voltage | VIN-VOUT | 1.3 | V | IOUT = 800 mA, over junction temperature range 0°C to 125°C | 6 | ||
| Thermal regulation | 0.01 | 0.1 | %/W | TA = 25°C, 30-ms pulse | 6 | ||
| Current limit | ILIMIT | 800 | 1200 | 1500 | mA | VIN - VOUT = 5 V, TJ = 25°C | 6 |
| Quiescent current | IQ | 10 | mA | LM1117-5.0, VIN ≤ 15 V, over junction temperature range 0°C to 125°C | 6 | ||
| Ripple rejection | 60 | dB | fRIPPLE = 120 Hz, VIN - VOUT = 3 V, VRIPPLE = 1 VPP, over junction temperature range 0°C to 125°C | 6 | |||
| Adjust pin current | IADJ | 120 | μA | over junction temperature range 0°C to 125°C | 6 | ||
| Adjust pin current change | 5 | μA | 10 ≤ IOUT ≤ 800 mA, 1.4 V ≤ VIN - VOUT ≤ 10 V, over junction temperature range 0°C to 125°C | 6 | |||
| Output voltage | VOUT | 5 | V | 0 ≤ IOUT ≤ 800 mA, 6.5 V ≤ VIN ≤ 12 V, TJ = 25°C | 5 | ||
| Line regulation | ΔVOUT | 1 | mV | IOUT = 0 mA, 6.5 V ≤ VIN ≤ 15 V, TJ = 25°C | 5 | ||
| Load regulation | ΔVOUT | 1 | mV | VIN = 6.5 V, 0 ≤ IOUT ≤ 800 mA, TJ = 25°C | 5 | ||
| Dropout voltage | VIN-VOUT | 1.1 | V | IOUT = 100 mA, TJ = 25°C | 6 | ||
| Dropout voltage | VIN-VOUT | 1.15 | V | IOUT = 500 mA, TJ = 25°C | 6 | ||
| Dropout voltage | VIN-VOUT | 1.2 | V | IOUT = 800 mA, TJ = 25°C | 6 | ||
| Quiescent current | IQ | 5 | mA | LM1117-5.0, VIN ≤ 15 V, TJ = 25°C | 6 | ||
| Ripple rejection | 75 | dB | fRIPPLE = 120 Hz, VIN - VOUT = 3 V, VRIPPLE = 1 VPP, TJ = 25°C | 6 | |||
| Adjust pin current | IADJ | 60 | μA | TJ = 25°C | 6 | ||
| Adjust pin current change | 0.2 | μA | 10 ≤ IOUT ≤ 800 mA, 1.4 V ≤ VIN - VOUT ≤ 10 V, TJ = 25°C | 6 | |||
| Temperature stability | 0.5 | % | 6 | ||||
| Long term stability | 0.3 | % | TA = 125°C, 1000 hours | 6 | |||
| RMS output noise (% of VOUT) | 0.003 | % | 10 Hz ≤ f ≤ 10 kHz | 6 | |||
| Maximum input voltage (VIN to GND) | VIN | 20 | V | VIN to GND | 4 | ||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Input voltage | VIN | 15 | V | VIN to GND | 4 | ||
| Junction temperature | TJ | 0 | 125 | °C | LM1117 (commercial) | 4 | |
| Junction-to-ambient thermal resistance | RθJA | 45.1 | °C/W | TO-252 (NDP) package | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 52.1 | °C/W | TO-252 (NDP) package | 4 | ||
| Junction-to-board thermal resistance | RθJB | 29.8 | °C/W | TO-252 (NDP) package | 4 | ||
| Junction-to-top characterization parameter | ψJT | 4.5 | °C/W | TO-252 (NDP) package | 4 | ||
| Junction-to-board characterization parameter | ψJB | 29.4 | °C/W | TO-252 (NDP) package | 4 | ||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 1.3 | °C/W | TO-252 (NDP) package | 4 |
CAD (KiCad official)
- Symbol:
LM1117DT-5.0 - Footprint:
Package_TO_SOT_SMD:TO-252-2 - 3D model: TO-252 (KiCad packages3D, STEP)
- 3D model files:
lm1117dt-5-0-etched.step/lm1117dt-5-0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm1117dt-5-0.step/lm1117dt-5-0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (47 pp, sha256
c117f5dd97fd15e6, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).