Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM10CN

Texas Instruments · Operational Amplifier · PDIP-8

LM10CN from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Reference Output output Output terminal of the reference, which can be set as low as 200 mV per the datasheet.
2 Op Amp Input (-) input Inverting input of the operational amplifier; the input common-mode range extends from the negative rail to 0.85 V below the positive rail.
3 Op Amp Input (+) input Noninverting input of the operational amplifier; the input common-mode range extends from the negative rail to 0.85 V below the positive rail.
4 V- power_in Negative supply voltage; with heavy amplifier loading to V-, lead resistance can degrade reference regulation, so the reference circuit common should be connected as close to the package as possible.
5 Balance input Used for offset nulling of the operational amplifier.
6 Op Amp Output output Output terminal of the operational amplifier, which can source or sink ±20 mA with ±0.4 V saturation per the datasheet.
7 V+ power_in Positive supply voltage; the device operates from a total supply of 1.2 V to 40 V (absolute maximum 45 V for LM10C).
8 Reference Feedback input Feedback terminal of the reference, with a feedback sense voltage of about 200 mV referred to V-, and used to set the reference output voltage.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package PDIP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply input voltage range (V-), (V+) VS 1.2 40 V 4
Reference voltage VREF 0.2 V 4
Reference current IREF 0 1 mA 4
Total supply voltage 45 V LM10/LM10B/LM10C 4
Differential input voltage -40 40 V LM10/LM10B/LM10C 4
Storage temperature Tstg -55 150 °C 4
Maximum junction temperature 85 °C LM10C 4
Lead temperature, DIP vapor phase 215 °C DIP vapor phase (60 seconds) 4
Lead temperature, DIP infrared 220 °C DIP infrared (15 seconds) 4
Junction-to-ambient thermal resistance RθJA 87 °C/W P (PDIP-8) package 4
Input offset voltage 0.5 4 mV TJ=25°C 6
Input offset voltage 5 mV TMIN ≤ TJ ≤ TMAX 6
Input offset current 0.4 2 nA TJ=25°C 6
Input offset current 3 nA TMIN ≤ TJ ≤ TMAX 6
Input bias current 12 30 nA TJ=25°C 6
Input bias current 40 nA TMIN ≤ TJ ≤ TMAX 6
Input resistance 150 400 kΩ TJ=25°C 6
Input resistance 115 kΩ TMIN ≤ TJ ≤ TMAX 6
Large signal voltage gain 80 400 V/mV VS = ±20 V, IOUT = 0 6
Large signal voltage gain 50 V/mV VOUT = ±19.95 V, TMIN ≤ TJ ≤ TMAX 6
Large signal voltage gain 25 130 V/mV VS = ±20 V, VOUT = ±19.4 V 6
Large signal voltage gain 15 V/mV IOUT = ±20 mA, TMIN ≤ TJ ≤ TMAX 6
Large signal voltage gain 1 3 V/mV VS = ±0.6 V, IOUT = ±2 mA 6
Large signal voltage gain 0.75 V/mV VOUT = ±0.4 V, TMIN ≤ TJ ≤ TMAX 6
Shunt gain 10 33 V/mV 1.2 V ≤ VOUT ≤ 40 V, RL = 1.1 kΩ 6
Shunt gain 6 V/mV 0.1 mA ≤ IOUT ≤ 5 mA, TMIN ≤ TJ ≤ TMAX 6
Shunt gain 6 25 V/mV 1.5 V ≤ V+ ≤ 40 V, RL = 250 Ω 6
Shunt gain 4 V/mV 0.1 mA ≤ IOUT ≤ 20 mA, TMIN ≤ TJ ≤ TMAX 6
Common-mode rejection 90 102 dB −20 V ≤ VCM ≤ 19.15 V 7
Common-mode rejection 87 dB VS = ±20 V, TMIN ≤ TJ ≤ TMAX 7
Supply-voltage rejection 87 96 dB −0.2 V ≥ V− ≥ −39 V 7
Supply-voltage rejection 84 dB V+ = 1 V, TMIN ≤ TJ ≤ TMAX 7
Supply-voltage rejection 93 106 dB 1 V ≤ V+ ≤ 39.8 V 7
Supply-voltage rejection 90 dB V− = −0.2 V, TMIN ≤ TJ ≤ TMAX 7
Line regulation 0.001 0.008 %/V 1.2 V ≤ VS ≤ 40 V 7
Line regulation 0.01 %/V 0 ≤ IREF ≤ 1 mA, VREF = 200 mV, TMIN ≤ TJ ≤ TMAX 7
Load regulation 0.01 0.15 % 0 ≤ IREF ≤ 1 mA 7
Load regulation 0.2 % V+ − VREF ≥ 1 V, TMIN ≤ TJ ≤ TMAX 7
Amplifier gain 25 70 V/mV TJ=25°C, 0.2 V ≤ VREF ≤ 35 V 7
Amplifier gain 15 V/mV 0.2 V ≤ VREF ≤ 35 V, TMIN ≤ TJ ≤ TMAX 7
Feedback sense voltage 190 200 210 mV TJ=25°C 7
Feedback sense voltage 189 211 mV TMIN ≤ TJ ≤ TMAX 7
Feedback current 22 75 nA TJ=25°C 7
Feedback current 90 nA TMIN ≤ TJ ≤ TMAX 7
Supply current 300 500 µA TJ=25°C 7
Supply current 570 µA TMIN ≤ TJ ≤ TMAX 7
Supply current change 15 µA TJ=25°C, 1.2 V ≤ VS ≤ 40 V 7
Supply current change 75 µA TMIN ≤ TJ ≤ TMAX, 1.2 V ≤ VS ≤ 40 V 7

CAD (KiCad official)

  • Symbol: LM10CN
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: PDIP-8 (KiCad packages3D, STEP)
  • 3D model files: lm10cn-etched.step / lm10cn-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm10cn.step / lm10cn.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (37 pp, sha256 6e3561e1f0e40245, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF