3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLM1086T-3.3
HGSEMI LM1086T 3 3 · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-220
LM1086T-3.3 from HGSEMI LM1086T 3 3, in a TO-220. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for the regulator. On the fixed-voltage LM1086-3.3 version, this pin is the device ground return (labeled GND/ADJ in the datasheet - the ADJ function applies only to the adjustable version). |
| 2 | VOUT | power_out | Regulated 3.3V output (±2% initial accuracy, ±3.3% over line/load). Requires a minimum ~10µF output capacitor (22µF tantalum recommended) for stability. Delivers up to 1.5A continuous. |
| 3 | VIN | power_in | Unregulated input supply. Recommended operating range up to 15V (absolute max 20V). Must exceed VOUT by at least the 1.2V dropout at full 1.5A load. A ~10µF input capacitor is recommended. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI LM1086T 3 3 |
| Package | TO-220 |
| Category | PMIC |
| Pins | 3 |
Ordering variants
LM1086T-3.3LM1086T-3.3LM1086T-ADJLM1086T-3.3LM1086T-5.0LM1086T-3.3LM1086MDT-3.3/TRLM1086T-3.3LM1086MDT-ADJ/TRLM1086T-3.3LM1086MDT-5.0/TRLM1086T-3.3LM1086S-3.3/TRLM1086T-3.3LM1086S-ADJ/TRLM1086T-3.3LM1086S-5.0/TR
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (LM1086-3.3), TJ=25°C | VOUT | 3.267 | 3.3 | 3.333 | V | IOUT=10mA, VIN=5V, TJ=25°C, 0≤IOUT≤1.5A, 4.75V≤VIN≤10V | 3 |
| Output voltage (LM1086-3.3), over operating temperature | VOUT | 3.235 | 3.3 | 3.365 | V | IOUT=10mA, VIN=5V, 0≤IOUT≤1.5A, 4.75V≤VIN≤10V | 3 |
| Dropout voltage | Vdrop | 1.2 | 1.25 | 1.3 | V | IOUT=1.5A | 3 |
| Line regulation | Rline | 3 | 7 | mV | VINMIN≤VIN≤12V, VOUT=Fixed/Adj, IOUT=10mA | 3 | |
| Load regulation | Rload | 6 | 12 | mV | 10mA≤IOUT≤1.5A, VOUT=Fixed/Adj | 3 | |
| Quiescent current | Iq | 5 | 10 | mA | 4.25V≤VIN≤6.5V | 3 | |
| Ripple rejection | PSRR | 60 | 75 | dB | fRIPPLE=120Hz, (VIN-VOUT)=3V, VRIPPLE=1VPP | 3 | |
| Adjust pin current | Iadj | 60 | 120 | µA | 3 | ||
| Adjust pin current change | Iadj | 0.2 | 5 | µA | 0≤IOUT≤1.5A, 1.4V≤VIN-VOUT≤10V | 3 | |
| Current limit | Ilimit | 1.2 | 1.4 | 1.5 | A | 3 | |
| Recommended input voltage | VIN | 15 | V | 3 | |||
| Recommended operating junction temperature range | TJ | -40 | 125 | °C | 3 | ||
| Input voltage (absolute maximum) | VIN | 20 | V | 2 | |||
| Lead temperature (soldering, 10 s) | TLEAD | 245 | °C | TO-263/TO-220, soldering 10 s | 2 | ||
| Operating junction temperature (absolute maximum) | TJ | 150 | °C | 2 | |||
| Storage temperature | TSTG | -65 | 150 | °C | 2 | ||
| ESD capability (minimum value) | ESD | 2000 | V | 2 | |||
| Output voltage temperature stability | TSOUT | 0.3 | % | 3 | |||
| Thermal shutdown temperature | TSD | 150 | °C | 3 | |||
| Temperature stability | 0.5 | % | 3 | ||||
| Long-term stability | 0.3 | % | Tamb=125°C, 1000Hrs | 3 | |||
| RMS output noise (% of VOUT) | 0.003 | % | 10Hz≤f≤10kHz | 3 | |||
| Thermal resistance junction-to-ambient, TO-220-3L (no heatsink) | θJA | 60 | °C/W | no heatsink | 3 |
CAD (KiCad official)
- Symbol:
LM1086T-3.3 - Footprint:
Package_TO_SOT_THT:TO-220-3_Vertical - 3D model: TO-220 (KiCad packages3D, STEP)
- 3D model files:
lm1086t-3-3-etched.step/lm1086t-3-3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm1086t-3-3.step/lm1086t-3-3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI LM1086T 3 3 datasheet (None pp, sha256
dfb3a1beb0eaf5a6, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.