Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LKS571

LINKOSEMI · Gate Drivers · SOP-8

LKS571 from LINKOSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Chip supply voltage, recommended 10 V to 20 V with an absolute maximum of 25 V, and it drives the undervoltage protection (VCCUV+ 7.5 V typ).
2 HIN input High-side logic input, active high (logic 1 turns the high-side output on), with VIH min 1.95 V and VIL max 1.25 V for VCC 10 V to 20 V.
3 LIN input Low-side logic input, active high (logic 1 turns the low-side output on), with the same VIH and VIL limits as HIN; outputs are disabled when HIN and LIN are both active.
4 COM power_in Chip ground reference for the IC.
5 LO output Low-side gate drive output, referenced to COM, with a 10 us pulse source current of 1200 mA min and sink current of 1500 mA.
6 VS power_in High-side floating offset (bias) voltage, recommended -5 V to 200 V, with absolute limits of VB-25 V to VB+0.3 V and a maximum dVS/dt of 50 V/ns.
7 HO output High-side gate drive output referenced to VS, with VHO between VS and VB.
8 VB power_in High-side floating supply, recommended VS + 10 V to VS + 20 V, with an absolute maximum of 250 V.

Key specifications

Parameter Value
Manufacturer LINKOSEMI
Package SOP-8
Category Motor Driver ICs
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
高侧浮动输入电源电压 VB -0.3 250 V 10
芯片供电电压 VCC -0.3 25 V 10
高侧浮动偏置电压变化率 dVS/dt 50 V/ns 10
功率耗散 PD 0.625 W @ TA +25°C, SOIC-8 10
结对环境的热阻 RthJA 200 °C/W SOIC-8 10
结温 TJ -40 150 °C 10
储存温度 TS -55 150 °C 10
引脚温度 TL 260 °C 10秒焊接条件下 10
芯片供电电压 VCC 10 20 V 10
高侧浮动偏置电压 VS -5 200 V 10
工作温度 TA -40 150 °C 10
导通延时 ton 140 220 ns VS = 0V 11
关断延时 toff 140 220 ns VS = 0V or 200V 11
导通上升沿 tr 10 22 50 ns 11
关断下降沿 tf 8 14 35 ns 11
延时匹配度 MT 60 120 ns 11
VCC欠压保护电压上阈值 VCCUV+ 6.5 7.5 8.5 V 12
VCC欠压保护电压下阈值 VCCUV- 6 7 8 V 12
VCC欠压保护迟滞电压 VCCHYS 0.2 0.5 0.8 V 12
VBS欠压保护电压上阈值 VBSUV+ 6.5 7.5 8.5 V 12
VBS欠压保护电压下阈值 VBSUV- 6 7 8 V 12
VBS欠压保护迟滞电压 VBSHYS 0.2 0.5 0.8 V 12
VCC静态电流 IQCC 70 150 uA VIN=0V 12
VBS静态电流 IQBS 20 30 uA VIN=0V 12
高侧偏置电源漏电流 ILK 10 uA VB=VS=250V 12
输入信号逻辑1的电压范围 VIH 1.95 V VCC=10~20V 12
输入信号逻辑0的电压范围 VIL 1.25 V VCC=10~20V 12
输入信号逻辑1的偏置电流 IIN+ 50 120 uA VIN=5V 12
输入信号逻辑0的偏置电流 IIN- 1 uA VIN=0V 12

CAD (KiCad official)

  • Symbol: LKS571
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: lks571-etched.step / lks571-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lks571.step / lks571.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: LINKOSEMI datasheet (13 pp, sha256 c52a3c0220e46516, retrieved 2026-10-30, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF