main
Ray
Publish 0.1.0
11a1f95
LKS570
LINKOSEMI · Gate Drivers · SOP-8
LKS570 from LINKOSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Chip supply voltage; recommended 10 to 20V (absolute max 25V), with undervoltage protection thresholds around 7V. |
| 2 | HIN | input | High-side input signal, active high (logic 1 turns the high side on); logic 1 above 1.95V and logic 0 below 1.25V for VCC=10~20V. |
| 3 | LIN | input | Low-side input signal, active low (logic 0 turns the low side on); logic 1 above 1.95V and logic 0 below 1.25V for VCC=10~20V. |
| 4 | COM | power_in | Chip ground. |
| 5 | LO | output | Low-side gate drive output, with 1200mA source and 1500mA sink pulsed short-circuit current, swinging 0 to VCC. |
| 6 | VS | power_in | High-side floating offset voltage, recommended -5V to 200V, with absolute max VB+0.3V and min VB-25V. |
| 7 | HO | output | High-side gate drive output, with 1200mA source and 1500mA sink pulsed short-circuit current, swinging VS to VB. |
| 8 | VB | power_in | High-side floating supply voltage, recommended VS+10V to VS+20V, with absolute max 250V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LINKOSEMI |
| Package | SOP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC UV upper threshold | VCCUV+ | 6.5 | 7.5 | 8.5 | V | VBIAS=12V, TA=25°C | 12 |
| VCC UV lower threshold | VCCUV- | 6 | 7 | 8 | V | VBIAS=12V, TA=25°C | 12 |
| VBS UV upper threshold | VBSUV+ | 6.5 | 7.5 | 8.5 | V | VBIAS=12V, TA=25°C | 12 |
| VBS UV lower threshold | VBSUV- | 6 | 7 | 8 | V | VBIAS=12V, TA=25°C | 12 |
| VCC quiescent current | IQCC | 70 | 150 | uA | Vin=0/5V | 12 | |
| VBS quiescent current | IQBS | 20 | 30 | uA | Vin=0/5V | 12 | |
| High-side bias leakage current | ILK | 50 | uA | VB=VS=250V | 12 | ||
| Logic 1 input voltage | VIH | 1.95 | V | VCC=10~20V | 12 | ||
| Logic 0 input voltage | VIL | 1.25 | V | VCC=10~20V | 12 | ||
| Logic 1 input bias current | IIN+ | 50 | 120 | uA | HIN=5V, LIN=0V | 12 | |
| Logic 0 input bias current | IIN- | 1 | uA | HIN=0V, LIN=5V | 12 | ||
| Turn-on delay | ton | 100 | 200 | ns | VS=0V, VBIAS=12V, CL=1000 pF, TA=25°C | 12 | |
| Turn-off delay | toff | 100 | 200 | ns | VS=0V or 200V, VBIAS=12V, CL=1000 pF, TA=25°C | 12 | |
| Turn-on rise time | tr | 50 | 100 | ns | VBIAS=12V, CL=1000 pF, TA=25°C | 12 | |
| Turn-off fall time | tf | 50 | 100 | ns | VBIAS=12V, CL=1000 pF, TA=25°C | 12 | |
| Delay matching | MT | 40 | 80 | ns | VBIAS=12V, CL=1000 pF, TA=25°C | 12 | |
| Dead time | DT | 250 | ns | VBIAS=12V, CL=1000 pF, TA=25°C | 12 | ||
| High-side floating supply voltage (abs max) | VB | -0.3 | 250 | V | 10 | ||
| Supply voltage (abs max) | VCC | -0.3 | 25 | V | 10 | ||
| High-side offset voltage slew rate (abs max) | dVS/dt | 50 | V/ns | 10 | |||
| Power dissipation | PD | 0.625 | W | @ TA +25°C, SOIC-8 | 10 | ||
| Junction temperature | TJ | -40 | 150 | °C | 10 | ||
| Storage temperature | TS | -55 | 150 | °C | 10 | ||
| Lead temperature | TL | 300 | °C | 10 s soldering | 10 | ||
| Junction-to-ambient thermal resistance | RthJA | 200 | °C/W | SOIC-8 | 10 | ||
| Supply voltage (recommended) | VCC | 10 | 20 | V | 10 | ||
| High-side floating offset voltage (recommended) | VS | -5 | 200 | V | 10 | ||
| Operating temperature | TA | -40 | 150 | °C | 10 | ||
| LO/HO output short-circuit source pulse current | IO+ | 1200 | mA | VO=0V, VIN=VIH, PW 10 us | 12 | ||
| LO/HO output short-circuit sink pulse current | IO- | 1500 | mA | VO=15V, VIN=VIL, PW 10 us | 12 |
CAD (KiCad official)
- Symbol:
LKS570 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
lks570-etched.step/lks570-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lks570.step/lks570.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LINKOSEMI datasheet (13 pp, sha256
3570b6fc21ebec80, retrieved 2026-10-30, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LKS570
**LINKOSEMI** · Gate Drivers · SOP-8
LKS570 from LINKOSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Chip supply voltage; recommended 10 to 20V (absolute max 25V), with undervoltage protection thresholds around 7V. |
| 2 | HIN | input | High-side input signal, active high (logic 1 turns the high side on); logic 1 above 1.95V and logic 0 below 1.25V for VCC=10~20V. |
| 3 | LIN | input | Low-side input signal, active low (logic 0 turns the low side on); logic 1 above 1.95V and logic 0 below 1.25V for VCC=10~20V. |
| 4 | COM | power_in | Chip ground. |
| 5 | LO | output | Low-side gate drive output, with 1200mA source and 1500mA sink pulsed short-circuit current, swinging 0 to VCC. |
| 6 | VS | power_in | High-side floating offset voltage, recommended -5V to 200V, with absolute max VB+0.3V and min VB-25V. |
| 7 | HO | output | High-side gate drive output, with 1200mA source and 1500mA sink pulsed short-circuit current, swinging VS to VB. |
| 8 | VB | power_in | High-side floating supply voltage, recommended VS+10V to VS+20V, with absolute max 250V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LINKOSEMI |
| Package | SOP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC UV upper threshold | VCCUV+ | 6.5 | 7.5 | 8.5 | V | VBIAS=12V, TA=25°C | 12 |
| VCC UV lower threshold | VCCUV- | 6 | 7 | 8 | V | VBIAS=12V, TA=25°C | 12 |
| VBS UV upper threshold | VBSUV+ | 6.5 | 7.5 | 8.5 | V | VBIAS=12V, TA=25°C | 12 |
| VBS UV lower threshold | VBSUV- | 6 | 7 | 8 | V | VBIAS=12V, TA=25°C | 12 |
| VCC quiescent current | IQCC | | 70 | 150 | uA | Vin=0/5V | 12 |
| VBS quiescent current | IQBS | | 20 | 30 | uA | Vin=0/5V | 12 |
| High-side bias leakage current | ILK | | | 50 | uA | VB=VS=250V | 12 |
| Logic 1 input voltage | VIH | 1.95 | | | V | VCC=10~20V | 12 |
| Logic 0 input voltage | VIL | | | 1.25 | V | VCC=10~20V | 12 |
| Logic 1 input bias current | IIN+ | | 50 | 120 | uA | HIN=5V, LIN=0V | 12 |
| Logic 0 input bias current | IIN- | | | 1 | uA | HIN=0V, LIN=5V | 12 |
| Turn-on delay | ton | | 100 | 200 | ns | VS=0V, VBIAS=12V, CL=1000 pF, TA=25°C | 12 |
| Turn-off delay | toff | | 100 | 200 | ns | VS=0V or 200V, VBIAS=12V, CL=1000 pF, TA=25°C | 12 |
| Turn-on rise time | tr | | 50 | 100 | ns | VBIAS=12V, CL=1000 pF, TA=25°C | 12 |
| Turn-off fall time | tf | | 50 | 100 | ns | VBIAS=12V, CL=1000 pF, TA=25°C | 12 |
| Delay matching | MT | | 40 | 80 | ns | VBIAS=12V, CL=1000 pF, TA=25°C | 12 |
| Dead time | DT | | 250 | | ns | VBIAS=12V, CL=1000 pF, TA=25°C | 12 |
| High-side floating supply voltage (abs max) | VB | -0.3 | | 250 | V | | 10 |
| Supply voltage (abs max) | VCC | -0.3 | | 25 | V | | 10 |
| High-side offset voltage slew rate (abs max) | dVS/dt | | | 50 | V/ns | | 10 |
| Power dissipation | PD | | | 0.625 | W | @ TA +25°C, SOIC-8 | 10 |
| Junction temperature | TJ | -40 | | 150 | °C | | 10 |
| Storage temperature | TS | -55 | | 150 | °C | | 10 |
| Lead temperature | TL | | | 300 | °C | 10 s soldering | 10 |
| Junction-to-ambient thermal resistance | RthJA | | | 200 | °C/W | SOIC-8 | 10 |
| Supply voltage (recommended) | VCC | 10 | | 20 | V | | 10 |
| High-side floating offset voltage (recommended) | VS | -5 | | 200 | V | | 10 |
| Operating temperature | TA | -40 | | 150 | °C | | 10 |
| LO/HO output short-circuit source pulse current | IO+ | | 1200 | | mA | VO=0V, VIN=VIH, PW 10 us | 12 |
| LO/HO output short-circuit sink pulse current | IO- | | 1500 | | mA | VO=15V, VIN=VIL, PW 10 us | 12 |
## CAD (KiCad official)
- Symbol: `LKS570`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `lks570-etched.step` / `lks570-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lks570.step` / `lks570.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [LINKOSEMI datasheet](docs/lks570-datasheet.pdf) (13 pp, sha256 `3570b6fc21ebec80`, retrieved 2026-10-30, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lks570-datasheet.pdf)