main
History Download
Ray Publish 0.1.0 c87aeae

LKS520

LINKOSEMI · Gate Drive ICs · SOP-8

LKS520 from LINKOSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Chip supply voltage, recommended 10 to 20 V with absolute maximum 25 V, and undervoltage lockout at about 7.6 V.
2 HIN input High-side logic input where logic 1 turns the high-side output on, with VIH minimum 2.4 V and VIL maximum 0.6 V.
3 LIN input Low-side logic input where logic 0 turns the low-side output on, and the figures label this pin LINb.
4 COM power_in Chip ground reference for the logic inputs and the low-side driver.
5 LO output Low-side gate drive output for an external MOS or IGBT, with VOL maximum 1.0 V at IO = 20 mA.
6 VS power_in High-side floating offset voltage, recommended -5 V to 600 V, with dVS/dt maximum 50 V/ns.
7 HO output High-side gate drive output referenced to VS, with VHO recommended between VS and VB.
8 VB power_in High-side floating supply voltage, recommended VS + 10 V to VS + 20 V, with absolute maximum 625 V.

Key specifications

Parameter Value
Manufacturer LINKOSEMI
Package SOP-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
High-side floating supply voltage (VB), absolute max VB -0.3 625 V 10
Low-side gate driver output voltage (VLO), absolute max VLO -0.3 V 10
Chip supply voltage (VCC), absolute max VCC -0.3 25 V 10
Logic input voltage (HIN & LIN), absolute max VIN -0.3 V 10
High-side floating offset voltage slew rate (dVS/dt) dVS/dt 50 V/ns 10
Power dissipation at TA = +25°C, SOIC-8 PD 0.625 W TA = +25°C 10
Junction-to-ambient thermal resistance, SOIC-8 RthJA 200 °C/W 10
Junction temperature TJ -40 150 °C 10
Storage temperature TS -55 150 °C 10
Lead temperature (soldering) TL 300 °C 10 s soldering 10
High-side floating offset voltage (VS), recommended VS -5 600 V 10
Low-side gate driver output voltage (VLO), recommended VLO 0 V 10
Chip supply voltage (VCC), recommended VCC 10 20 V 10
Logic input voltage (HIN & LIN), recommended VIN 0 V 10
Operating ambient temperature TA -40 150 °C 10
Turn-on propagation delay (ton) ton 100 270 450 ns VS = 0V 10
Turn-off propagation delay (toff) toff 80 180 300 ns VS = 0V or 600V 11
Turn-on rise time (tr) tr 40 100 ns 11
Turn-off fall time (tf) tf 12 50 ns 11
Dead time (DT) DT 40 100 250 ns 11
Delay matching (HS-LS) MT 80 ns ton & toff for (HS-LS) 11
VCC undervoltage protection upper threshold (rising) VCC_ON 8 8.5 9.8 V 11
VBS undervoltage protection upper threshold (rising) VBS_ON 8.7 10 V 11
VCC undervoltage protection lower threshold (falling) VCC_UVLO 7.2 7.6 8.8 V 11
VBS undervoltage protection lower threshold (falling) VBS_UVLO 6.5 7.8 V 11
VCC undervoltage lockout hysteresis VCC_HYS 0.7 0.9 1.1 V 11
VCC quiescent current IQCC 50 150 uA HIN=0V, LINb=5V 11
VBS quiescent current IQBS 35 80 uA HIN=0V, LINb=5V 11
High-side floating supply leakage current ILK 10 uA VHO=VB=VS=620V 11
Logic 1 input voltage (VIH) VIH 2.4 V 11
Logic 0 input voltage (VIL) VIL 0.6 V 11
Logic 1 input bias current, high side IISOURCE_HS 32 100 uA HIN =5V 11
Logic 0 input bias current, high side IISINK_HS 1 uA HIN=0V 11
Logic 1 input bias current, low side IISOURCE_LS 1 uA LINb=5V 11
Logic 0 input bias current, low side IISINK_LS 50 100 uA LINb=0V 12
High-level output voltage VOH 1 V IO=20mA 12
Low-level output voltage VOL 1 V IO=20mA 12
LO/HO output high short-circuit pulsed source current IO+ 300 450 mA VO=0V, VIN=5V, Pulse Width < 10uS 12
LO/HO output low short-circuit pulsed sink current IO- 650 1000 mA VO=15V, VIN=0V, Pulse Width < 10uS 12

CAD (KiCad official)

  • Symbol: LKS520
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: lks520-etched.step / lks520-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lks520.step / lks520.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: LINKOSEMI datasheet (13 pp, sha256 35bd95b0a37fcbb9, retrieved 2026-11-04, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF