main
Ray lks32mc083c8t8: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) fad7bd0
{
  "schema_version": 1,
  "type": "component",
  "slug": "lks32mc083c8t8",
  "title": "LKS32MC083C8T8",
  "brief": "LINKOSEMI Microcontrollers (MCU/MPU/SOC), TQFP-48(7x7). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "mcu",
    "lks32mc083c8t8"
  ],
  "component": {
    "mpn": "LKS32MC083C8T8",
    "manufacturer": "LINKOSEMI",
    "package": "TQFP-48(7x7)",
    "pin_count": 48,
    "category": "MCU",
    "subcategory": "Microcontrollers (MCU/MPU/SOC)",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/2415052a0739fc92622a074b22959d6f.pdf",
    "parts": {
      "symbol": "lks32mc083c8t8.kicad_sym",
      "footprint": "lks32mc083c8t8.kicad_mod",
      "model_3d": "lks32mc083c8t8-etched.glb",
      "model_3d_plain": "lks32mc083c8t8.glb",
      "model_3d_step": "lks32mc083c8t8-etched.step",
      "model_3d_step_plain": "lks32mc083c8t8.step",
      "lbr": "lks32mc083c8t8.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "ADC_CH4/DAC_OUT/P0.0",
        "type": "bidirectional",
        "description": "GPIO P0.0 muxed with ADC channel 4 input and 12-bit DAC output. Internal software-enabled 10 kΩ pull-up to AVDD."
      },
      {
        "number": "2",
        "name": "RSTN/P0.2",
        "type": "bidirectional",
        "description": "System reset input (active low) by default, alternately GPIO P0.2. Internal 100 kΩ pull-up to AVDD fixed on; external 10 nF-100 nF cap to GND recommended, with optional 10-20 kΩ external pull-up."
      },
      {
        "number": "3",
        "name": "AVSS",
        "type": "power_in",
        "description": "System analog/digital ground return."
      },
      {
        "number": "4",
        "name": "AVDD",
        "type": "power_in",
        "description": "Main chip power input, 2.2-5.5 V (B revision 3.0-5.5 V). External decoupling cap ≥1 µF recommended, placed close to AVDD."
      },
      {
        "number": "5",
        "name": "P3.2",
        "type": "bidirectional",
        "description": "General-purpose I/O P3.2."
      },
      {
        "number": "6",
        "name": "SCL/TIM2_CH0/ADC_CH7/P0.3",
        "type": "bidirectional",
        "description": "GPIO P0.3 muxed with I2C SCL, Timer2 channel 0, and ADC channel 7."
      },
      {
        "number": "7",
        "name": "SDA/TIM2_CH1/ADC_CH8/P0.4",
        "type": "bidirectional",
        "description": "GPIO P0.4 muxed with I2C SDA, Timer2 channel 1, and ADC channel 8."
      },
      {
        "number": "8",
        "name": "ADC_CH9/P0.5",
        "type": "bidirectional",
        "description": "GPIO P0.5 muxed with ADC channel 9."
      },
      {
        "number": "9",
        "name": "UART1_TX(RX)/TIM1_CH0/CAN_RX/P0.6",
        "type": "bidirectional",
        "description": "GPIO P0.6 muxed with UART1 TX or RX (swappable), Timer1 channel 0, and CAN RX. Internal software-enabled 10 kΩ pull-up."
      },
      {
        "number": "10",
        "name": "UART1_TX(RX)/TIM1_CH1/CAN_TX/P0.7",
        "type": "bidirectional",
        "description": "GPIO P0.7 muxed with UART1 TX or RX, Timer1 channel 1, and CAN TX. Internal software-enabled 10 kΩ pull-up."
      },
      {
        "number": "11",
        "name": "MCPWM_CH1P/TIM2_CH0/P2.11",
        "type": "bidirectional",
        "description": "Motor-control PWM channel 1 high-side output, muxed with Timer2 channel 0 and GPIO P2.11."
      },
      {
        "number": "12",
        "name": "MCPWM_CH1N/TIM2_CH1/ADC_TRIG2/P2.12",
        "type": "bidirectional",
        "description": "Motor-control PWM channel 1 low-side output, Timer2 channel 1, ADC trigger 2 and GPIO P2.12."
      },
      {
        "number": "13",
        "name": "HALL_IN0/TIM3_CH0/ADC_CH15/CMP0_IP1/P0.11",
        "type": "bidirectional",
        "description": "Hall-sensor phase A input; muxed with Timer3 channel 0, ADC channel 15, comparator 0 non-inverting input 1, and GPIO P0.11. Wake source."
      },
      {
        "number": "14",
        "name": "HALL_IN1/TIM3_CH1/CAN_RX/ADC_CH16/CMP0_IP2/P0.12",
        "type": "bidirectional",
        "description": "Hall-sensor phase B input; muxed with Timer3 channel 1, CAN RX, ADC channel 16, comparator 0 non-inverting input 2, and GPIO P0.12."
      },
      {
        "number": "15",
        "name": "HALL_IN2/CAN_TX/ADC_CH17/CMP0_IP3/P0.13",
        "type": "bidirectional",
        "description": "Hall-sensor phase C input; muxed with CAN TX, ADC channel 17, comparator 0 non-inverting input 3, and GPIO P0.13."
      },
      {
        "number": "16",
        "name": "CMP0_OUT/MCPWM_BKIN1/SPI_CLK/TIM0_CH1/ADC_TRIG0/SIF/ADC_CH10/CMP0_IP4/P0.14",
        "type": "bidirectional",
        "description": "Highly muxed pin: comparator 0 output, MCPWM brake-input 1, SPI clock, Timer0 channel 1, ADC trigger 0, single-wire/SIF interface, ADC channel 10, comparator 0 non-inverting input 4, GPIO P0.14."
      },
      {
        "number": "17",
        "name": "MCPWM_CH0P/UART0_TX(RX)/SPI_DI(DO)/TIM0_CH0/ADC_TRIG1/CMP0_IN/P0.15",
        "type": "bidirectional",
        "description": "MCPWM channel 0 high-side, UART0 TX/RX, SPI DI/DO, Timer0 channel 0, ADC trigger 1, comparator 0 inverting input, GPIO P0.15."
      },
      {
        "number": "18",
        "name": "MCPWM_CH0N/UART0_TX(RX)/SPI_DI(DO)/P1.0",
        "type": "bidirectional",
        "description": "MCPWM channel 0 low-side, UART0 TX/RX, SPI DI/DO, GPIO P1.0. Internal software-enabled 10 kΩ pull-up."
      },
      {
        "number": "19",
        "name": "TIM3_CH1/ADC_CH5/P1.3",
        "type": "bidirectional",
        "description": "Timer3 channel 1, ADC channel 5, GPIO P1.3. Internal software-enabled 10 kΩ pull-up."
      },
      {
        "number": "20",
        "name": "OPA0_IP/P3.5",
        "type": "bidirectional",
        "description": "Op-amp 0 non-inverting input, GPIO P3.5."
      },
      {
        "number": "21",
        "name": "OPA0_IN/P3.7",
        "type": "bidirectional",
        "description": "Op-amp 0 inverting input, GPIO P3.7."
      },
      {
        "number": "22",
        "name": "ADC_CH11/OPAx_OUT/LDO15/P2.7",
        "type": "bidirectional",
        "description": "ADC channel 11 / any-OPA output / internal 1.5 V LDO output tap / GPIO P2.7. Internal software-enabled 10 kΩ pull-up."
      },
      {
        "number": "23",
        "name": "OPA1_IP/P3.0",
        "type": "bidirectional",
        "description": "Op-amp 1 non-inverting input, GPIO P3.0."
      },
      {
        "number": "24",
        "name": "OPA1_IN/P3.1",
        "type": "bidirectional",
        "description": "Op-amp 1 inverting input, GPIO P3.1."
      },
      {
        "number": "25",
        "name": "UART1_TX(RX)/TIM3_CH0/OSC_IN/P2.8",
        "type": "bidirectional",
        "description": "UART1 TX/RX, Timer3 channel 0, 4 MHz crystal input, GPIO P2.8. Internal software-enabled 10 kΩ pull-up. When used with a crystal, add a ~15 pF cap to GND."
      },
      {
        "number": "26",
        "name": "UART1_TX(RX)/TIM3_CH1/OSC_OUT/P3.9",
        "type": "bidirectional",
        "description": "UART1 TX/RX, Timer3 channel 1, crystal output, GPIO P3.9. Internal software-enabled 10 kΩ pull-up. When used with a crystal, add a ~15 pF cap to GND."
      },
      {
        "number": "27",
        "name": "LRC/MCPWM_CH0P/P1.4",
        "type": "bidirectional",
        "description": "32 kHz low-speed RC clock output, MCPWM channel 0 high-side, GPIO P1.4."
      },
      {
        "number": "28",
        "name": "HRC/MCPWM_CH0N/P1.5",
        "type": "bidirectional",
        "description": "4 MHz high-speed RC clock output, MCPWM channel 0 low-side, GPIO P1.5."
      },
      {
        "number": "29",
        "name": "MCPWM_CH1P/P1.6",
        "type": "bidirectional",
        "description": "MCPWM channel 1 high-side output, GPIO P1.6."
      },
      {
        "number": "30",
        "name": "MCPWM_CH1N/P1.7",
        "type": "bidirectional",
        "description": "MCPWM channel 1 low-side output, GPIO P1.7."
      },
      {
        "number": "31",
        "name": "MCPWM_CH2P/P1.8",
        "type": "bidirectional",
        "description": "MCPWM channel 2 high-side output, GPIO P1.8."
      },
      {
        "number": "32",
        "name": "MCPWM_CH2N/P1.9",
        "type": "bidirectional",
        "description": "MCPWM channel 2 low-side output, GPIO P1.9."
      },
      {
        "number": "33",
        "name": "ADC_CH13/MCPWM_CH3P/UART0_TX(RX)/SCL/TIM0_CH0/ADC_TRIG2/P1.10",
        "type": "bidirectional",
        "description": "ADC channel 13, MCPWM channel 3 high-side, UART0 TX/RX, I2C SCL, Timer0 channel 0, ADC trigger 2, GPIO P1.10. Internal software-enabled 10 kΩ pull-up."
      },
      {
        "number": "34",
        "name": "MCPWM_CH3N/UART0_TX(RX)/SDA/TIM0_CH1/ADC_TRIG3/SIF/P1.11",
        "type": "bidirectional",
        "description": "MCPWM channel 3 low-side, UART0 TX/RX, I2C SDA, Timer0 channel 1, ADC trigger 3, SIF, GPIO P1.11. Internal software-enabled 10 kΩ pull-up."
      },
      {
        "number": "35",
        "name": "OPA2_IP/P3.10",
        "type": "bidirectional",
        "description": "Op-amp 2 non-inverting input, GPIO P3.10."
      },
      {
        "number": "36",
        "name": "OPA2_IN/P3.11",
        "type": "bidirectional",
        "description": "Op-amp 2 inverting input, GPIO P3.11."
      },
      {
        "number": "37",
        "name": "SPI_DI(DO)/SCL/ADC_CH12/CMP0_IP0/P2.9",
        "type": "bidirectional",
        "description": "SPI data-in or data-out (swappable), I2C SCL, ADC channel 12, comparator 0 non-inverting input 0, GPIO P2.9."
      },
      {
        "number": "38",
        "name": "SPI_DI(DO)/SDA/P2.10",
        "type": "bidirectional",
        "description": "SPI data-in or data-out (swappable), I2C SDA, GPIO P2.10. Internal software-enabled 10 kΩ pull-up."
      },
      {
        "number": "39",
        "name": "OPA3_IN/P3.14",
        "type": "bidirectional",
        "description": "Op-amp 3 inverting input, GPIO P3.14."
      },
      {
        "number": "40",
        "name": "OPA3_IP/P3.15",
        "type": "bidirectional",
        "description": "Op-amp 3 non-inverting input, GPIO P3.15."
      },
      {
        "number": "41",
        "name": "SPI_CLK/ADC_CH14/CMP1_IP0/P2.1",
        "type": "bidirectional",
        "description": "SPI clock, ADC channel 14, comparator 1 non-inverting input 0, GPIO P2.1. Internal software-enabled 10 kΩ pull-up."
      },
      {
        "number": "42",
        "name": "CMP1_IN/P2.2",
        "type": "bidirectional",
        "description": "Comparator 1 inverting input, GPIO P2.2."
      },
      {
        "number": "43",
        "name": "CMP1_OUT/MCPWM_BKIN0/SPI_CS/REF/P2.3",
        "type": "bidirectional",
        "description": "Comparator 1 output, MCPWM brake-input 0, SPI chip-select, voltage reference, GPIO P2.3."
      },
      {
        "number": "44",
        "name": "HALL_IN0/CAN_RX/MCPWM_CH2P/UART1_TX(RX)/TIM1_CH0/ADC_TRIG3/CMP1_IP1/P2.4",
        "type": "bidirectional",
        "description": "Hall phase A input, CAN RX, MCPWM channel 2 high-side, UART1 TX/RX, Timer1 channel 0, ADC trigger 3, comparator 1 non-inverting input 1, GPIO P2.4. Internal software-enabled 10 kΩ pull-up."
      },
      {
        "number": "45",
        "name": "HALL_IN1/CAN_TX/MCPWM_CH2N/UART1_TX(RX)/TIM1_CH1/ADC_TRIG0/CMP1_IP2/P2.5",
        "type": "bidirectional",
        "description": "Hall phase B input, CAN TX, MCPWM channel 2 low-side, UART1 TX/RX, Timer1 channel 1, ADC trigger 0, comparator 1 non-inverting input 2, GPIO P2.5. Internal software-enabled 10 kΩ pull-up."
      },
      {
        "number": "46",
        "name": "HALL_IN2/MCPWM_CH3P/TIM3_CH0/ADC_TRIG1/CMP1_IP3/P2.6",
        "type": "bidirectional",
        "description": "Hall phase C input, MCPWM channel 3 high-side, Timer3 channel 0, ADC trigger 1, comparator 1 non-inverting input 3, GPIO P2.6. Internal software-enabled 10 kΩ pull-up."
      },
      {
        "number": "47",
        "name": "SWCLK",
        "type": "input",
        "description": "Serial-wire debug clock input. Fixed internal 10 kΩ pull-up."
      },
      {
        "number": "48",
        "name": "SWDIO",
        "type": "bidirectional",
        "description": "Serial-wire debug data I/O. Fixed internal 10 kΩ pull-up."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/2415052a0739fc92622a074b22959d6f.pdf",
        "pages": 60,
        "sha256": "184a8de0b09ebdcf",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 48,
        "described": 48,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lks32mc083c8t8.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9,
          9,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "14ca7676e4932e92f0eca0c6d56ce3018cd28a2531204a70ab7bbacb3eeb3cf5",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lks32mc083c8t8-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9,
          9,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "3c8cce730636222dac69c15a123d6993785617530660e1983c649a4daeca7ce8",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "LINKOSEMI",
      "Package": "TQFP-48(7x7)",
      "Category": "MCU",
      "Pins": "48"
    }
  },
  "variants": [
    {
      "mpn": "LKS32MC083C8T8",
      "kind": "packaging"
    },
    {
      "mpn": "LKS32MC083C8T8(B)",
      "kind": "packaging"
    },
    {
      "mpn": "LKS32MC081C8T8",
      "kind": "unknown"
    },
    {
      "mpn": "LKS32MC081C8T8(B)",
      "kind": "unknown"
    },
    {
      "mpn": "LKS32MC088C6T8",
      "kind": "unknown"
    },
    {
      "mpn": "LKS32MC088C6T8(B)",
      "kind": "unknown"
    },
    {
      "mpn": "LKS32MC080R8T8",
      "kind": "unknown"
    },
    {
      "mpn": "LKS32MC080R8T8(B)",
      "kind": "unknown"
    },
    {
      "mpn": "LKS32MC082K8Q8",
      "kind": "unknown"
    },
    {
      "mpn": "LKS32MC082K8Q8(B)",
      "kind": "unknown"
    },
    {
      "mpn": "LKS32MC084DF6Q8",
      "kind": "unknown"
    },
    {
      "mpn": "LKS32AT085C8Q9",
      "kind": "unknown"
    },
    {
      "mpn": "LKS32AT085C8Q9(B)",
      "kind": "unknown"
    },
    {
      "mpn": "LKS32MC087M6S8",
      "kind": "unknown"
    },
    {
      "mpn": "LKS32MC087AM6S8",
      "kind": "unknown"
    },
    {
      "mpn": "LKS32MC087CM6S8",
      "kind": "unknown"
    },
    {
      "mpn": "LKS32MC087DM6S8",
      "kind": "unknown"
    },
    {
      "mpn": "LKS32MC087EM6S8",
      "kind": "unknown"
    }
  ],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "lks32mc083c8t8"
  ],
  "discovery_pitch": "LKS32MC083C8T8 (LINKOSEMI) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lks32mc083c8t8.kicad_sym",
    "lks32mc083c8t8.kicad_mod",
    "lks32mc083c8t8.glb",
    "lks32mc083c8t8.step",
    "lks32mc083c8t8.lbr",
    "docs/hero.png",
    "docs/lks32mc083c8t8-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T00:00:56.838Z"
}