main
Ray lks32mc081c8t8: laser-etched CAD + chip hero (factory 2.0.0 backfill) ead2493

LKS32MC081C8T8

LINKOSEMI · Microcontrollers (MCU/MPU/SOC) · TQFP-48(7x7)

LKS32MC081C8T8 from LINKOSEMI, in a TQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ADC_CH4/DAC_OUT/P0.0 bidirectional GPIO P0.0 with ADC channel 4 input and 12-bit DAC output alternate functions. Software-enabled 10 kΩ pull-up to AVDD available.
2 RSTN/P0.2 bidirectional Active-low reset input (default function) or GPIO P0.2. Internal 100 kΩ pull-up to AVDD, always enabled; datasheet recommends an external 10 nF-100 nF cap to ground and an optional external 10 k-20 k pull-up.
3 AVSS power_in System (analog and digital) ground reference.
4 AVDD power_in Chip main power supply input, 2.2-5.5 V (3.0-5.5 V on B silicon). Requires a ≥1 µF decoupling capacitor placed as close to the pin as possible.
5 P3.2 bidirectional General-purpose I/O P3.2, no advertised alternate functions on this package.
6 SCL/TIM2_CH0/ADC_CH7/P0.3 bidirectional IIC clock (SCL) / Timer2 channel 0 / ADC channel 7 / GPIO P0.3.
7 SDA/TIM2_CH1/ADC_CH8/P0.4 bidirectional IIC data (SDA) / Timer2 channel 1 / ADC channel 8 / GPIO P0.4.
8 ADC_CH9/P0.5 bidirectional ADC channel 9 analog input / GPIO P0.5.
9 UART1_TX(RX)/TIM1_CH0/P0.6 bidirectional UART1 TX or RX (direction chosen by GPIO_POE/PIE) / Timer1 channel 0 / GPIO P0.6. Software-enabled 10 kΩ internal pull-up.
10 UART1_TX(RX)/TIM1_CH1/P0.7 bidirectional UART1 TX or RX (direction chosen by GPIO_POE/PIE) / Timer1 channel 1 / GPIO P0.7. Software-enabled 10 kΩ internal pull-up.
11 MCPWM_CH1P/TIM2_CH0/P2.11 bidirectional Motor-control PWM channel 1 high-side / Timer2 channel 0 / GPIO P2.11.
12 MCPWM_CH1N/TIM2_CH1/ADC_TRIG2/P2.12 bidirectional Motor-control PWM channel 1 low-side / Timer2 channel 1 / ADC trigger 2 / GPIO P2.12.
13 HALL_IN0/TIM3_CH0/ADC_CH15/CMP0_IP1/P0.11 bidirectional Hall sensor phase-A input / Timer3 channel 0 / ADC channel 15 / Comparator 0 non-inverting input 1 / GPIO P0.11.
14 HALL_IN1/TIM3_CH1/ADC_CH16/CMP0_IP2/P0.12 bidirectional Hall sensor phase-B input / Timer3 channel 1 / ADC channel 16 / Comparator 0 non-inverting input 2 / GPIO P0.12.
15 HALL_IN2/ADC_CH17/CMP0_IP3/P0.13 bidirectional Hall sensor phase-C input / ADC channel 17 / Comparator 0 non-inverting input 3 / GPIO P0.13. LKS32MC081 has no CAN so the CAN_TX alt on the LKS32MC083 variant is absent here.
16 CMP0_OUT/MCPWM_BKIN1/SPI_CLK/TIM0_CH1/ADC_TRIG0/SIF/ADC_CH10/CMP0_IP4/P0.14 bidirectional Heavily-muxed pin: Comparator 0 output / MCPWM break-in 1 / SPI clock / Timer0 channel 1 / ADC trigger 0 / 1-wire SIF / ADC channel 10 / Comparator 0 non-inv input 4 / GPIO P0.14.
17 MCPWM_CH0P/UART0_TX(RX)/SPI_DI(DO)/TIM0_CH0/ADC_TRIG1/CMP0_IN/P0.15 bidirectional MCPWM channel 0 high-side / UART0 TX or RX / SPI DI or DO / Timer0 channel 0 / ADC trigger 1 / Comparator 0 inverting input / GPIO P0.15.
18 MCPWM_CH0N/UART0_TX(RX)/SPI_DI(DO)/P1.0 bidirectional MCPWM channel 0 low-side / UART0 TX or RX / SPI DI or DO / GPIO P1.0. Software-enabled 10 kΩ pull-up.
19 TIM3_CH1/ADC_CH5/P1.3 bidirectional Timer3 channel 1 / ADC channel 5 / GPIO P1.3. Software-enabled 10 kΩ pull-up.
20 OPA0_IP/P3.5 bidirectional Op-amp 0 non-inverting input / GPIO P3.5.
21 OPA0_IN/P3.7 bidirectional Op-amp 0 inverting input / GPIO P3.7.
22 ADC_CH11/OPAx_OUT/LDO15/P2.7 bidirectional ADC channel 11 / Op-amp x output / internal 1.5 V LDO output / GPIO P2.7. Software-enabled 10 kΩ pull-up.
23 OPA1_IP/P3.0 bidirectional Op-amp 1 non-inverting input / GPIO P3.0.
24 OPA1_IN/P3.1 bidirectional Op-amp 1 inverting input / GPIO P3.1.
25 UART1_TX(RX)/TIM3_CH0/OSC_IN/P2.8 bidirectional UART1 TX or RX / Timer3 channel 0 / external crystal oscillator input / GPIO P2.8. Software-enabled 10 kΩ pull-up. If a crystal is attached, connect a ~15 pF cap to ground.
26 UART1_TX(RX)/TIM3_CH1/OSC_OUT/P3.9 bidirectional UART1 TX or RX / Timer3 channel 1 / external crystal oscillator output / GPIO P3.9. Software-enabled 10 kΩ pull-up. If a crystal is attached, connect a ~15 pF cap to ground.
27 LRC/MCPWM_CH0P/P1.4 bidirectional 32 kHz low-speed RC clock output / MCPWM channel 0 high-side / GPIO P1.4.
28 HRC/MCPWM_CH0N/P1.5 bidirectional 4 MHz high-speed RC clock output / MCPWM channel 0 low-side / GPIO P1.5.
29 MCPWM_CH1P/P1.6 bidirectional MCPWM channel 1 high-side / GPIO P1.6.
30 MCPWM_CH1N/P1.7 bidirectional MCPWM channel 1 low-side / GPIO P1.7.
31 MCPWM_CH2P/P1.8 bidirectional MCPWM channel 2 high-side / GPIO P1.8.
32 MCPWM_CH2N/P1.9 bidirectional MCPWM channel 2 low-side / GPIO P1.9.
33 ADC_CH13/MCPWM_CH3P/UART0_TX(RX)/SCL/TIM0_CH0/ADC_TRIG2/P1.10 bidirectional ADC channel 13 / MCPWM channel 3 high-side / UART0 TX or RX / IIC SCL / Timer0 channel 0 / ADC trigger 2 / GPIO P1.10. Software-enabled 10 kΩ pull-up.
34 MCPWM_CH3N/UART0_TX(RX)/SDA/TIM0_CH1/ADC_TRIG3/SIF/P1.11 bidirectional MCPWM channel 3 low-side / UART0 TX or RX / IIC SDA / Timer0 channel 1 / ADC trigger 3 / SIF / GPIO P1.11. Software-enabled 10 kΩ pull-up.
35 OPA2_IP/P3.10 bidirectional Op-amp 2 non-inverting input / GPIO P3.10.
36 OPA2_IN/P3.11 bidirectional Op-amp 2 inverting input / GPIO P3.11.
37 SPI_DI(DO)/SCL/ADC_CH12/CMP0_IP0/P2.9 bidirectional SPI DI or DO / IIC SCL / ADC channel 12 / Comparator 0 non-inv input 0 / GPIO P2.9.
38 SPI_DI(DO)/SDA/P2.10 bidirectional SPI DI or DO / IIC SDA / GPIO P2.10. Software-enabled 10 kΩ pull-up.
39 OPA3_IN/P3.14 bidirectional Op-amp 3 inverting input / GPIO P3.14.
40 OPA3_IP/P3.15 bidirectional Op-amp 3 non-inverting input / GPIO P3.15.
41 SPI_CLK/ADC_CH14/CMP1_IP0/P2.1 bidirectional SPI clock / ADC channel 14 / Comparator 1 non-inv input 0 / GPIO P2.1. Software-enabled 10 kΩ pull-up.
42 CMP1_IN/P2.2 bidirectional Comparator 1 inverting input / GPIO P2.2.
43 CMP1_OUT/MCPWM_BKIN0/SPI_CS/REF/P2.3 bidirectional Comparator 1 output / MCPWM break-in 0 / SPI chip-select / voltage reference / GPIO P2.3.
44 HALL_IN0/MCPWM_CH2P/UART1_TX(RX)/TIM1_CH0/ADC_TRIG3/CMP1_IP1/P2.4 bidirectional Hall sensor phase-A input / MCPWM channel 2 high-side / UART1 TX or RX / Timer1 channel 0 / ADC trigger 3 / Comparator 1 non-inv input 1 / GPIO P2.4. Software-enabled 10 kΩ pull-up.
45 HALL_IN1/MCPWM_CH2N/UART1_TX(RX)/TIM1_CH1/ADC_TRIG0/CMP1_IP2/P2.5 bidirectional Hall sensor phase-B input / MCPWM channel 2 low-side / UART1 TX or RX / Timer1 channel 1 / ADC trigger 0 / Comparator 1 non-inv input 2 / GPIO P2.5. Software-enabled 10 kΩ pull-up.
46 HALL_IN2/MCPWM_CH3P/TIM3_CH0/ADC_TRIG1/CMP1_IP3/P2.6 bidirectional Hall sensor phase-C input / MCPWM channel 3 high-side / Timer3 channel 0 / ADC trigger 1 / Comparator 1 non-inv input 3 / GPIO P2.6. Software-enabled 10 kΩ pull-up.
47 SWCLK input Serial-wire debug clock input. Internal 10 kΩ pull-up permanently enabled.
48 SWDIO bidirectional Serial-wire debug data I/O. Internal 10 kΩ pull-up permanently enabled.

Key specifications

Parameter Value
Manufacturer LINKOSEMI
Package TQFP-48(7x7)
Category MCU
Pins 48

Ordering variants

Same part, different packaging or reel option.

  • LKS32MC081C8T8
  • LKS32MC081C8T8(B)
  • LKS32MC088C6T8
  • LKS32MC088C6T8(B)
  • LKS32MC083C8T8
  • LKS32MC083C8T8(B)
  • LKS32MC080R8T8
  • LKS32MC080R8T8(B)
  • LKS32MC082K8Q8
  • LKS32MC082K8Q8(B)
  • LKS32MC087M6S8
  • LKS32MC087M6S8(B)

CAD (KiCad official)

  • Symbol: LKS32MC081C8T8
  • Footprint: Package_QFP:TQFP-48_7x7mm_P0.5mm
  • 3D model: TQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: lks32mc081c8t8-etched.step / lks32mc081c8t8-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lks32mc081c8t8.step / lks32mc081c8t8.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: LINKOSEMI datasheet (60 pp, sha256 184a8de0b09ebdcf, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF