main
Ray Publish 0.1.0 1a219ad

LKS32MC071CBT8

LINKOSEMI · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-48

LKS32MC071CBT8 from LINKOSEMI, in a TQFP-48. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P0_0 bidirectional GPIO P0.0 multiplexed with CLKO, MCPWM_BKIN0, UART0_RXD, SPI_DI, CLUOUT0, ADC01_CH4, DAC0_OUT, DAC1_OUT, FLT, EXTI0 and WK0; internal 10kΩ pull-up that can be disabled in software.
2 P0_2 / RST_n bidirectional Reset pin RST_n (default function of P0.2, which can be switched to GPIO); datasheet recommends a 10nF-100nF capacitor to ground and a 10k-20k pull-up between RSTN and AVDD, with a 100nF capacitor if an external pull-up is used, and RSTN has a fixed internal 100kΩ pull-up.
3 GND power_in Chip ground; the datasheet strongly recommends connecting multiple ground pins together on the PCB.
4 AVDD power_in Chip supply voltage, specified range 2.5-5.5 V.
5 P3_2 bidirectional GPIO P3.2 multiplexed with MCPWM_CH3P (PWM channel 3 high side) and CLUOUT2.
6 P0_3 bidirectional GPIO P0.3 multiplexed with MCPWM_CH4P, SCL, TIM2_CH0, ADC01_CH7 and EXTI3; internal 10kΩ pull-up that can be disabled in software.
7 P0_4 bidirectional GPIO P0.4 multiplexed with MCPWM_CH4N, SDA, TIM2_CH1 and ADC01_CH8; internal 10kΩ pull-up that can be disabled in software.
8 P0_5 bidirectional GPIO P0.5 multiplexed with HALL_IN0, MCPWM_CH5P, QEP0_Z and ADC01_CH9.
9 P0_6 bidirectional GPIO P0.6 multiplexed with HALL_IN1, MCPWM_CH5N, CAN_RX, UART1_RXD, SCL, TIM1_CH0, CMP2_IN, FLT, EXTI4 and WK2; internal 10kΩ pull-up that can be disabled in software.
10 P0_7 bidirectional GPIO P0.7 multiplexed with HALL_IN2, MCPWM_BKIN1, UART1_TXD, SDA, TIM1_CH1, CAN_TX, CMP2_IP0 and FLT; internal 10kΩ pull-up that can be disabled in software.
11 P2_11 bidirectional GPIO P2.11 multiplexed with MCPWM_CH1P, TIM2_CH0 and CMP2_IP1.
12 P2_12 bidirectional GPIO P2.12 multiplexed with MCPWM_CH1N, SPI_CS, TIM2_CH1, ADC_TRIGGER0, CLUOUT3 and EXTI6.
13 P0_11 bidirectional GPIO P0.11 multiplexed with HALL_IN0, TIM3_CH0, ADC1_CH11, CMP0_IP1, FLT, EXTI7 and WK3.
14 P0_12 bidirectional GPIO P0.12 multiplexed with HALL_IN1, TIM3_CH1, CAN_RX, ADC1_CH12, CMP0_IP2 and FLT.
15 P0_13 bidirectional GPIO P0.13 multiplexed with HALL_IN2, QEP0_Z, CAN_TX, ADC1_CH13, CMP0_IP3 and FLT.
16 P0_14 bidirectional GPIO P0.14 multiplexed with CMP0_OUT, MCPWM_BKIN1, UART0_TXD, SPI_CLK, SCL, TIM0_CH1, QEP1_Z, ADC_TRIGGER0, SIF, CLUOUT0, ADC0_CH10, CMP0_IP4, FLT, EXTI8 and WK4; internal 10kΩ pull-up that can be disabled in software.
17 P0_15 bidirectional GPIO P0.15 multiplexed with CMP2_OUT, MCPWM_CH0P, UART0_RXD, SPI_DO, SDA, TIM0_CH0, ADC_TRIGGER1, CMP0_IN, FLT and EXTI9; internal 10kΩ pull-up that can be disabled in software.
18 P1_0 bidirectional GPIO P1.0 multiplexed with MCPWM_CH0N, UART0_TXD, SPI_DI, TIM0_BKIN and EXTI10; internal 10kΩ pull-up that can be disabled in software.
19 P1_3 bidirectional GPIO P1.3 multiplexed with TIM3_CH1 and ADC01_CH5; internal 10kΩ pull-up that can be disabled in software.
20 P3_5 input Op-amp 0 non-inverting input (OPA0_IP) on P3.5.
21 P3_7 input Op-amp 0 inverting input (OPA0_IN) on P3.7.
22 P2_7 bidirectional GPIO P2.7 multiplexed with CLKO, UART0_TXD, TIM0_CH0, TIM3_CH1, ADC_TRIGGER1, CAN_TX, CLUOUT1, ADC0_CH11, OPAx_OUT (op-amp output buffer), LDO15 (1.5 V LDO output), REF (reference voltage), EXTI11 and WK6; internal 10kΩ pull-up that can be disabled in software.
23 P3_0 input Op-amp 1 non-inverting input (OPA1_IP) on P3.0.
24 P3_1 input Op-amp 1 inverting input (OPA1_IN) on P3.1.
25 P2_8 bidirectional GPIO P2.8 multiplexed with UART1_RXD, SPI_DO, TIM3_CH0 and OSC_IN (external crystal pin); internal 10kΩ pull-up that can be disabled in software.
26 P3_9 bidirectional GPIO P3.9 multiplexed with UART1_TXD, TIM3_CH1 and OSC_OUT (external crystal pin); internal 10kΩ pull-up that can be disabled in software.
27 P1_4 bidirectional GPIO P1.4 multiplexed with MCPWM_CH0P and QEP0_Z.
28 P1_5 bidirectional GPIO P1.5 multiplexed with MCPWM_CH0N.
29 P1_6 bidirectional GPIO P1.6 multiplexed with MCPWM_CH1P.
30 P1_7 bidirectional GPIO P1.7 multiplexed with MCPWM_CH1N.
31 P1_8 bidirectional GPIO P1.8 multiplexed with MCPWM_CH2P.
32 P1_9 bidirectional GPIO P1.9 multiplexed with MCPWM_CH2N.
33 P1_10 bidirectional GPIO P1.10 multiplexed with MCPWM_CH3P, UART0_RXD, SCL, TIM0_CH0, ADC_TRIGGER0, ADC0_CH13 and EXTI12; internal 10kΩ pull-up that can be disabled in software.
34 P1_11 bidirectional GPIO P1.11 multiplexed with MCPWM_CH3N, UART0_TXD, SDA, TIM0_CH1, ADC_TRIGGER1, SIF and CLUOUT2; internal 10kΩ pull-up that can be disabled in software.
35 P3_10 bidirectional GPIO P3.10 multiplexed with MCPWM_CH4P and OPA2_IP (op-amp 2 non-inverting input).
36 P3_11 bidirectional GPIO P3.11 multiplexed with MCPWM_CH4N and OPA2_IN (op-amp 2 inverting input).
37 P2_9 bidirectional GPIO P2.9 multiplexed with MCPWM_CH5P, SPI_DI, SCL, ADC0_CH12 and CMP0_IP0; internal 10kΩ pull-up that can be disabled in software.
38 P2_10 bidirectional GPIO P2.10 multiplexed with MCPWM_CH5N, SPI_DO and SDA; internal 10kΩ pull-up that can be disabled in software.
39 P3_14 input Op-amp 3 inverting input (OPA3_IN) on P3.14.
40 P3_15 input Op-amp 3 non-inverting input (OPA3_IP) on P3.15.
41 P2_1 bidirectional GPIO P2.1 multiplexed with SPI_CLK, ADC1_CH10 and CMP1_IP0.
42 P2_2 bidirectional GPIO P2.2 multiplexed with QEP1_Z and CMP1_IN (comparator 1 inverting input).
43 P2_3 bidirectional GPIO P2.3 multiplexed with CMP1_OUT, MCPWM_BKIN0, SPI_CS, TIM0_CH1, QEP0_Z, CLUOUT3, FLT and EXTI13.
44 P2_4 bidirectional GPIO P2.4 multiplexed with CMP0_OUT, HALL_IN0, MCPWM_CH2P, UART1_RXD, SPI_CLK, TIM1_CH0, TIM2_CH0, ADC_TRIGGER0, CAN_RX, CMP1_IP1, FLT, EXTI14 and WK5; internal 10kΩ pull-up that can be disabled in software.
45 P2_5 bidirectional GPIO P2.5 multiplexed with CMP1_OUT, HALL_IN1, MCPWM_CH2N, UART1_TXD, SPI_DO, TIM1_CH1, TIM2_CH1, ADC_TRIGGER1, CAN_TX, CMP1_IP2 and FLT; internal 10kΩ pull-up that can be disabled in software.
46 P2_6 bidirectional GPIO P2.6 multiplexed with CMP2_OUT, HALL_IN2, MCPWM_CH3P, TIM0_BKIN, TIM3_CH0, ADC_TRIGGER0, SIF, CLUOUT0, CMP1_IP3 and FLT; internal 10kΩ pull-up that can be disabled in software.
47 P2_14 bidirectional GPIO P2.14 multiplexed with SWCLK (SWD clock), SPI_DI and SCL; internal 10kΩ pull-up that can be disabled in software.
48 P2_15 bidirectional GPIO P2.15 multiplexed with SWDIO (SWD data), UART0_RXD, SPI_CS, SDA, TIM2_CH1, CLUOUT1, EXTI15 and WK7; internal 10kΩ pull-up that can be disabled in software.

Key specifications

Parameter Value
Manufacturer LINKOSEMI
Package TQFP-48
Category Single Chip Microcomputer/Microcontroller
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power supply voltage AVDD -0.3 6 V 65
Pre-driver supply voltage VCC -0.3 25 V LKS07x with 6N driver 65
Pre-driver supply voltage VCC -0.3 40 V LKS07x with 3P3N driver 65
LDO supply voltage VCCLDO -0.3 25 V 074DO 中 LDO 供电的引脚 65
Operating temperature -40 105 ˚C 65
Storage temperature -40 150 ˚C 65
Junction temperature 125 °C 65
Lead temperature 260 °C 焊接,10 秒 65
ESD (HBM) -6000 6000 V MIL-STD-883J Method 3015.9 65
Latch-up current -200 200 mA 85℃ 65
GPIO signal input voltage range VIN -0.3 6 V 65
Max injection current per GPIO IINJ_PAD -11.2 11.2 mA 65
Max injection current, all GPIO IINJ_SUM -50 50 mA 65
Power supply voltage AVDD 2.5 5 5.5 V 65
Analog operating voltage AVDDA 2.8 5 5.5 V REF2VDD=0,ADC 选择 2.4V 内部基准 65
Analog operating voltage AVDDA 2.4 5 5.5 V REF2VDD=1,ADC 选择 AVDD 为基准 65
Pre-driver supply voltage VCC 4.5 20 V 071DO/074DO 65
Digital IO input high voltage VIH 3.06 V AVDD 5V 66
Digital IO input high voltage VIH 2.07 V AVDD 3.3V 66
Digital IO input low voltage VIL 0.8 V AVDD 3.3V 66
Digital IO output low voltage VOL 0.5 V 最大驱动电流 11.2mA 66
Digital IO input high current, current consumption IIH 1 uA AVDD 5V / 3.3V 66
Digital IO input low current, current consumption IIL -1 uA AVDD 5V / 3.3V 66
Pull-up resistance Rpup 8 12 kΩ 66
Resistance between IO and internal analog circuit Rio-ana 100 200 Ω 66
Digital IO input capacitance CIN 10 pF AVDD 5V / 3.3V 66

CAD (KiCad official)

  • Symbol: LKS32MC071CBT8
  • Footprint: Package_QFP:TQFP-48_7x7mm_P0.5mm
  • 3D model: TQFP-48 (KiCad packages3D, STEP)
  • 3D model files: lks32mc071cbt8-etched.step / lks32mc071cbt8-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lks32mc071cbt8.step / lks32mc071cbt8.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: LINKOSEMI datasheet (91 pp, sha256 d7b5cc2187fa2830, retrieved 2026-11-13, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF