main
Ray Publish 0.1.0 7fbe5ba
{
  "slug": "lks32mc071c8t8",
  "version": "0.1.0",
  "type": "component",
  "description": "LINKOSEMI Microcontroller Units (MCUs/MPUs/SOCs), TQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "single chip microcomputer-microcontroller",
    "lks32mc071c8t8",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lks32mc071c8t8.kicad_sym",
    "lks32mc071c8t8.kicad_mod",
    "lks32mc071c8t8.glb",
    "lks32mc071c8t8.step",
    "lks32mc071c8t8.lbr",
    "docs/hero.png",
    "docs/lks32mc071c8t8-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lks32mc071c8t8-hero.glb",
    "lks32mc071c8t8-hero.overlay.json"
  ],
  "component": {
    "mpn": "LKS32MC071C8T8",
    "manufacturer": "LINKOSEMI",
    "package": "TQFP-48(7x7)",
    "pin_count": 48,
    "category": "Single Chip Microcomputer/Microcontroller",
    "subcategory": "Microcontroller Units (MCUs/MPUs/SOCs)",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/40aa2e17ca77ed62a1f79890ac6523cb.pdf",
    "parts": {
      "symbol": "lks32mc071c8t8.kicad_sym",
      "footprint": "lks32mc071c8t8.kicad_mod",
      "model_3d": "lks32mc071c8t8-hero.glb",
      "model_3d_plain": "lks32mc071c8t8.glb",
      "model_3d_step": "lks32mc071c8t8-etched.step",
      "model_3d_step_plain": "lks32mc071c8t8.step",
      "lbr": "lks32mc071c8t8.lbr"
    },
    "distributor_links": {
      "lcsc": "C7500649"
    },
    "distributor_check": {
      "checked_at": "2026-11-13T12:23:18Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "P0_0",
        "type": "bidirectional",
        "description": "GPIO P0.0 multiplexes CLKO, MCPWM_BKIN0, UART0_RXD, SPI_DI, CLUOUT0, ADC01_CH4, DAC0_OUT, DAC1_OUT, FLT, EXTI0 and WK0, with a built-in 10kΩ pull-up that software can disable."
      },
      {
        "number": "2",
        "name": "P0_2",
        "type": "bidirectional",
        "description": "P0.2 defaults to the RSTN reset pin; a 10nF to 100nF capacitor to ground and a 10k to 20k pull-up between RSTN and AVDD are recommended, and it can be switched to GPIO."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Chip ground; multiple ground pins are strongly recommended to be tied together on the PCB."
      },
      {
        "number": "4",
        "name": "AVDD",
        "type": "power_in",
        "description": "Chip power supply with a supply range of 2.5 to 5.5 V."
      },
      {
        "number": "5",
        "name": "P3_2",
        "type": "bidirectional",
        "description": "GPIO P3.2 multiplexes MCPWM_CH3P (PWM channel 3 high side) and CLUOUT2."
      },
      {
        "number": "6",
        "name": "P0_3",
        "type": "bidirectional",
        "description": "GPIO P0.3 multiplexes MCPWM_CH4P, SCL, TIM2_CH0, ADC01_CH7 and EXTI3, with a built-in 10kΩ pull-up that software can disable."
      },
      {
        "number": "7",
        "name": "P0_4",
        "type": "bidirectional",
        "description": "GPIO P0.4 multiplexes MCPWM_CH4N, SDA, TIM2_CH1 and ADC01_CH8, with a built-in 10kΩ pull-up that software can disable."
      },
      {
        "number": "8",
        "name": "P0_5",
        "type": "bidirectional",
        "description": "GPIO P0.5 multiplexes HALL_IN0, MCPWM_CH5P, QEP0_Z and ADC01_CH9."
      },
      {
        "number": "9",
        "name": "P0_6",
        "type": "bidirectional",
        "description": "GPIO P0.6 multiplexes HALL_IN1, MCPWM_CH5N, UART1_RXD, SCL, TIM1_CH0, CMP2_IN, FLT, EXTI4 and WK2, with a built-in 10kΩ pull-up that software can disable."
      },
      {
        "number": "10",
        "name": "P0_7",
        "type": "bidirectional",
        "description": "GPIO P0.7 multiplexes HALL_IN2, MCPWM_BKIN1, UART1_TXD, SDA, TIM1_CH1, CMP2_IP0 and FLT, with a built-in 10kΩ pull-up that software can disable."
      },
      {
        "number": "11",
        "name": "P2_11",
        "type": "bidirectional",
        "description": "GPIO P2.11 multiplexes MCPWM_CH1P, TIM2_CH0 and CMP2_IP1."
      },
      {
        "number": "12",
        "name": "P2_12",
        "type": "bidirectional",
        "description": "GPIO P2.12 multiplexes MCPWM_CH1N, SPI_CS, TIM2_CH1, ADC_TRIGGER0, CLUOUT3 and EXTI6."
      },
      {
        "number": "13",
        "name": "P0_11",
        "type": "bidirectional",
        "description": "GPIO P0.11 multiplexes HALL_IN0, TIM3_CH0, ADC1_CH11, CMP0_IP1, FLT, EXTI7 and WK3."
      },
      {
        "number": "14",
        "name": "P0_12",
        "type": "bidirectional",
        "description": "GPIO P0.12 multiplexes HALL_IN1, TIM3_CH1, CAN_RX, ADC1_CH12, CMP0_IP2 and FLT."
      },
      {
        "number": "15",
        "name": "P0_13",
        "type": "bidirectional",
        "description": "GPIO P0.13 multiplexes HALL_IN2, QEP0_Z, CAN_TX, ADC1_CH13, CMP0_IP3 and FLT."
      },
      {
        "number": "16",
        "name": "P0_14",
        "type": "bidirectional",
        "description": "GPIO P0.14 multiplexes CMP0_OUT, MCPWM_BKIN1, UART0_TXD, SPI_CLK, SCL, TIM0_CH1, QEP1_Z, ADC_TRIGGER0, SIF, CLUOUT0, ADC0_CH10, CMP0_IP4, FLT, EXTI8 and WK4, with a built-in 10kΩ pull-up that software can disable."
      },
      {
        "number": "17",
        "name": "P0_15",
        "type": "bidirectional",
        "description": "GPIO P0.15 multiplexes CMP2_OUT, MCPWM_CH0P, UART0_RXD, SPI_DO, SDA, TIM0_CH0, ADC_TRIGGER1, CMP0_IN, FLT and EXTI9, with a built-in 10kΩ pull-up that software can disable."
      },
      {
        "number": "18",
        "name": "P1_0",
        "type": "bidirectional",
        "description": "GPIO P1.0 multiplexes MCPWM_CH0N, UART0_TXD, SPI_DI, TIM0_BKIN and EXTI10, with a built-in 10kΩ pull-up that software can disable."
      },
      {
        "number": "19",
        "name": "P1_3",
        "type": "bidirectional",
        "description": "GPIO P1.3 multiplexes TIM3_CH1 and ADC01_CH5, with a built-in 10kΩ pull-up that software can disable."
      },
      {
        "number": "20",
        "name": "P3_5",
        "type": "input",
        "description": "GPIO P3.5 is the non-inverting (positive) input of operational amplifier 0 (OPA0_IP)."
      },
      {
        "number": "21",
        "name": "P3_7",
        "type": "input",
        "description": "GPIO P3.7 is the inverting (negative) input of operational amplifier 0 (OPA0_IN)."
      },
      {
        "number": "22",
        "name": "P2_7",
        "type": "bidirectional",
        "description": "GPIO P2.7 multiplexes CLKO, UART0_TXD, TIM0_CH0, TIM3_CH1, ADC_TRIGGER1, CLUOUT1, ADC0_CH11, OPAx_OUT (op-amp output buffer), LDO15 (1.5V LDO output), REF (reference voltage), EXTI11 and WK6, with a built-in 10kΩ pull-up that software can disable."
      },
      {
        "number": "23",
        "name": "P3_0",
        "type": "input",
        "description": "GPIO P3.0 is the non-inverting (positive) input of operational amplifier 1 (OPA1_IP)."
      },
      {
        "number": "24",
        "name": "P3_1",
        "type": "input",
        "description": "GPIO P3.1 is the inverting (negative) input of operational amplifier 1 (OPA1_IN)."
      },
      {
        "number": "25",
        "name": "P2_8",
        "type": "passive",
        "description": "GPIO P2.8 multiplexes UART1_RXD, SPI_DO, TIM3_CH0 and OSC_IN (external crystal pin), with a built-in 10kΩ pull-up that software can disable."
      },
      {
        "number": "26",
        "name": "P3_9",
        "type": "passive",
        "description": "GPIO P3.9 multiplexes UART1_TXD, TIM3_CH1 and OSC_OUT (external crystal pin), with a built-in 10kΩ pull-up that software can disable."
      },
      {
        "number": "27",
        "name": "P1_4",
        "type": "bidirectional",
        "description": "GPIO P1.4 multiplexes MCPWM_CH0P and QEP0_Z."
      },
      {
        "number": "28",
        "name": "P1_5",
        "type": "bidirectional",
        "description": "GPIO P1.5 is the MCPWM_CH0N (PWM channel 0 low side) function pin."
      },
      {
        "number": "29",
        "name": "P1_6",
        "type": "bidirectional",
        "description": "GPIO P1.6 is the MCPWM_CH1P (PWM channel 1 high side) function pin."
      },
      {
        "number": "30",
        "name": "P1_7",
        "type": "bidirectional",
        "description": "GPIO P1.7 is the MCPWM_CH1N (PWM channel 1 low side) function pin."
      },
      {
        "number": "31",
        "name": "P1_8",
        "type": "bidirectional",
        "description": "GPIO P1.8 is the MCPWM_CH2P (PWM channel 2 high side) function pin."
      },
      {
        "number": "32",
        "name": "P1_9",
        "type": "bidirectional",
        "description": "GPIO P1.9 is the MCPWM_CH2N (PWM channel 2 low side) function pin."
      },
      {
        "number": "33",
        "name": "P1_10",
        "type": "bidirectional",
        "description": "GPIO P1.10 multiplexes MCPWM_CH3P, UART0_RXD, SCL, TIM0_CH0, ADC_TRIGGER0, ADC0_CH13 and EXTI12, with a built-in 10kΩ pull-up that software can disable."
      },
      {
        "number": "34",
        "name": "P1_11",
        "type": "bidirectional",
        "description": "GPIO P1.11 multiplexes MCPWM_CH3N, UART0_TXD, SDA, TIM0_CH1, ADC_TRIGGER1, SIF and CLUOUT2, with a built-in 10kΩ pull-up that software can disable."
      },
      {
        "number": "35",
        "name": "P3_10",
        "type": "bidirectional",
        "description": "GPIO P3.10 multiplexes MCPWM_CH4P and is the non-inverting (positive) input of operational amplifier 2 (OPA2_IP)."
      },
      {
        "number": "36",
        "name": "P3_11",
        "type": "bidirectional",
        "description": "GPIO P3.11 multiplexes MCPWM_CH4N and is the inverting (negative) input of operational amplifier 2 (OPA2_IN)."
      },
      {
        "number": "37",
        "name": "P2_9",
        "type": "bidirectional",
        "description": "GPIO P2.9 multiplexes MCPWM_CH5P, SPI_DI, SCL, CMP0_IP0 and ADC0_CH12, with a built-in 10kΩ pull-up that software can disable."
      },
      {
        "number": "38",
        "name": "P2_10",
        "type": "bidirectional",
        "description": "GPIO P2.10 multiplexes MCPWM_CH5N, SPI_DO and SDA, with a built-in 10kΩ pull-up that software can disable."
      },
      {
        "number": "39",
        "name": "P3_14",
        "type": "input",
        "description": "GPIO P3.14 is the inverting (negative) input of operational amplifier 3 (OPA3_IN)."
      },
      {
        "number": "40",
        "name": "P3_15",
        "type": "input",
        "description": "GPIO P3.15 is the non-inverting (positive) input of operational amplifier 3 (OPA3_IP)."
      },
      {
        "number": "41",
        "name": "P2_1",
        "type": "bidirectional",
        "description": "GPIO P2.1 multiplexes SPI_CLK, ADC1_CH10 and CMP1_IP0."
      },
      {
        "number": "42",
        "name": "P2_2",
        "type": "bidirectional",
        "description": "GPIO P2.2 multiplexes QEP1_Z and CMP1_IN (comparator 1 inverting input)."
      },
      {
        "number": "43",
        "name": "P2_3",
        "type": "bidirectional",
        "description": "GPIO P2.3 multiplexes CMP1_OUT, MCPWM_BKIN0, SPI_CS, TIM0_CH1, QEP0_Z, CLUOUT3, FLT, and EXTI13."
      },
      {
        "number": "44",
        "name": "P2_4",
        "type": "bidirectional",
        "description": "GPIO P2.4 multiplexes CMP0_OUT, HALL_IN0, MCPWM_CH2P, UART1_RXD, SPI_CLK, TIM1_CH0, TIM2_CH0, ADC_TRIGGER0, CAN_RX, CMP1_IP1, FLT, EXTI14 and WK5, with a built-in 10kΩ pull-up that software can disable."
      },
      {
        "number": "45",
        "name": "P2_5",
        "type": "bidirectional",
        "description": "GPIO P2.5 multiplexes CMP1_OUT, HALL_IN1, MCPWM_CH2N, UART1_TXD, SPI_DO, TIM1_CH1, TIM2_CH1, ADC_TRIGGER1, CAN_TX, CMP1_IP2 and FLT, with a built-in 10kΩ pull-up that software can disable."
      },
      {
        "number": "46",
        "name": "P2_6",
        "type": "bidirectional",
        "description": "GPIO P2.6 multiplexes CMP2_OUT, HALL_IN2, MCPWM_CH3P, TIM0_BKIN, TIM3_CH0, ADC_TRIGGER0, SIF, CLUOUT0, CMP1_IP3 and FLT, with a built-in 10kΩ pull-up that software can disable."
      },
      {
        "number": "47",
        "name": "P2_14",
        "type": "input",
        "description": "GPIO P2.14 carries the SWCLK serial-wire debug clock, also multiplexed with SPI_DI and SCL, with a built-in 10kΩ pull-up that software can disable."
      },
      {
        "number": "48",
        "name": "P2_15",
        "type": "bidirectional",
        "description": "GPIO P2.15 carries the SWDIO serial-wire debug data line, also multiplexed with UART0_RXD, SPI_CS, SDA, TIM2_CH1, CLUOUT1, EXTI15 and WK7, with a built-in 10kΩ pull-up that software can disable."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet lists LKS32MC071C8T8 as TQFP48 (tables 2-1 and 3-2), but section 4 gives no TQFP48 out; The pin-diagram text for LKS32MC071C8T8 (section 3.1.2, page 18) is garbled, so pin numbers and name"
        ],
        "pages_sent": 65,
        "cost_usd": 0.3565,
        "at": "2026-11-13T12:23:08"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/40aa2e17ca77ed62a1f79890ac6523cb.pdf",
        "pages": 91,
        "sha256": "d7b5cc2187fa2830",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 48,
        "described": 48,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lks32mc071c8t8.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9.0,
          9.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "14ca7676e4932e92f0eca0c6d56ce3018cd28a2531204a70ab7bbacb3eeb3cf5",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lks32mc071c8t8-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9.0,
          9.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "cbd219e587f8cc0452356c1f20de841c7cfcfc406595069fbb7e742381c9b81d",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "TQFP48",
      "source_page": 60,
      "D": {
        "nom_mm": 7.0,
        "range_mm": [
          6.9,
          7.1
        ]
      },
      "E1": {
        "nom_mm": 7.0,
        "range_mm": [
          6.9,
          7.1
        ]
      },
      "E": {
        "nom_mm": 9.0,
        "range_mm": [
          8.8,
          9.2
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.2,
        "range_mm": [
          null,
          1.2
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "lks32mc071c8t8.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}