main
Ray Publish 0.1.0 7fbe5ba

LKS32MC071C8T8

LINKOSEMI · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-48(7x7)

LKS32MC071C8T8 from LINKOSEMI, in a TQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P0_0 bidirectional GPIO P0.0 multiplexes CLKO, MCPWM_BKIN0, UART0_RXD, SPI_DI, CLUOUT0, ADC01_CH4, DAC0_OUT, DAC1_OUT, FLT, EXTI0 and WK0, with a built-in 10kΩ pull-up that software can disable.
2 P0_2 bidirectional P0.2 defaults to the RSTN reset pin; a 10nF to 100nF capacitor to ground and a 10k to 20k pull-up between RSTN and AVDD are recommended, and it can be switched to GPIO.
3 GND power_in Chip ground; multiple ground pins are strongly recommended to be tied together on the PCB.
4 AVDD power_in Chip power supply with a supply range of 2.5 to 5.5 V.
5 P3_2 bidirectional GPIO P3.2 multiplexes MCPWM_CH3P (PWM channel 3 high side) and CLUOUT2.
6 P0_3 bidirectional GPIO P0.3 multiplexes MCPWM_CH4P, SCL, TIM2_CH0, ADC01_CH7 and EXTI3, with a built-in 10kΩ pull-up that software can disable.
7 P0_4 bidirectional GPIO P0.4 multiplexes MCPWM_CH4N, SDA, TIM2_CH1 and ADC01_CH8, with a built-in 10kΩ pull-up that software can disable.
8 P0_5 bidirectional GPIO P0.5 multiplexes HALL_IN0, MCPWM_CH5P, QEP0_Z and ADC01_CH9.
9 P0_6 bidirectional GPIO P0.6 multiplexes HALL_IN1, MCPWM_CH5N, UART1_RXD, SCL, TIM1_CH0, CMP2_IN, FLT, EXTI4 and WK2, with a built-in 10kΩ pull-up that software can disable.
10 P0_7 bidirectional GPIO P0.7 multiplexes HALL_IN2, MCPWM_BKIN1, UART1_TXD, SDA, TIM1_CH1, CMP2_IP0 and FLT, with a built-in 10kΩ pull-up that software can disable.
11 P2_11 bidirectional GPIO P2.11 multiplexes MCPWM_CH1P, TIM2_CH0 and CMP2_IP1.
12 P2_12 bidirectional GPIO P2.12 multiplexes MCPWM_CH1N, SPI_CS, TIM2_CH1, ADC_TRIGGER0, CLUOUT3 and EXTI6.
13 P0_11 bidirectional GPIO P0.11 multiplexes HALL_IN0, TIM3_CH0, ADC1_CH11, CMP0_IP1, FLT, EXTI7 and WK3.
14 P0_12 bidirectional GPIO P0.12 multiplexes HALL_IN1, TIM3_CH1, CAN_RX, ADC1_CH12, CMP0_IP2 and FLT.
15 P0_13 bidirectional GPIO P0.13 multiplexes HALL_IN2, QEP0_Z, CAN_TX, ADC1_CH13, CMP0_IP3 and FLT.
16 P0_14 bidirectional GPIO P0.14 multiplexes CMP0_OUT, MCPWM_BKIN1, UART0_TXD, SPI_CLK, SCL, TIM0_CH1, QEP1_Z, ADC_TRIGGER0, SIF, CLUOUT0, ADC0_CH10, CMP0_IP4, FLT, EXTI8 and WK4, with a built-in 10kΩ pull-up that software can disable.
17 P0_15 bidirectional GPIO P0.15 multiplexes CMP2_OUT, MCPWM_CH0P, UART0_RXD, SPI_DO, SDA, TIM0_CH0, ADC_TRIGGER1, CMP0_IN, FLT and EXTI9, with a built-in 10kΩ pull-up that software can disable.
18 P1_0 bidirectional GPIO P1.0 multiplexes MCPWM_CH0N, UART0_TXD, SPI_DI, TIM0_BKIN and EXTI10, with a built-in 10kΩ pull-up that software can disable.
19 P1_3 bidirectional GPIO P1.3 multiplexes TIM3_CH1 and ADC01_CH5, with a built-in 10kΩ pull-up that software can disable.
20 P3_5 input GPIO P3.5 is the non-inverting (positive) input of operational amplifier 0 (OPA0_IP).
21 P3_7 input GPIO P3.7 is the inverting (negative) input of operational amplifier 0 (OPA0_IN).
22 P2_7 bidirectional GPIO P2.7 multiplexes CLKO, UART0_TXD, TIM0_CH0, TIM3_CH1, ADC_TRIGGER1, CLUOUT1, ADC0_CH11, OPAx_OUT (op-amp output buffer), LDO15 (1.5V LDO output), REF (reference voltage), EXTI11 and WK6, with a built-in 10kΩ pull-up that software can disable.
23 P3_0 input GPIO P3.0 is the non-inverting (positive) input of operational amplifier 1 (OPA1_IP).
24 P3_1 input GPIO P3.1 is the inverting (negative) input of operational amplifier 1 (OPA1_IN).
25 P2_8 passive GPIO P2.8 multiplexes UART1_RXD, SPI_DO, TIM3_CH0 and OSC_IN (external crystal pin), with a built-in 10kΩ pull-up that software can disable.
26 P3_9 passive GPIO P3.9 multiplexes UART1_TXD, TIM3_CH1 and OSC_OUT (external crystal pin), with a built-in 10kΩ pull-up that software can disable.
27 P1_4 bidirectional GPIO P1.4 multiplexes MCPWM_CH0P and QEP0_Z.
28 P1_5 bidirectional GPIO P1.5 is the MCPWM_CH0N (PWM channel 0 low side) function pin.
29 P1_6 bidirectional GPIO P1.6 is the MCPWM_CH1P (PWM channel 1 high side) function pin.
30 P1_7 bidirectional GPIO P1.7 is the MCPWM_CH1N (PWM channel 1 low side) function pin.
31 P1_8 bidirectional GPIO P1.8 is the MCPWM_CH2P (PWM channel 2 high side) function pin.
32 P1_9 bidirectional GPIO P1.9 is the MCPWM_CH2N (PWM channel 2 low side) function pin.
33 P1_10 bidirectional GPIO P1.10 multiplexes MCPWM_CH3P, UART0_RXD, SCL, TIM0_CH0, ADC_TRIGGER0, ADC0_CH13 and EXTI12, with a built-in 10kΩ pull-up that software can disable.
34 P1_11 bidirectional GPIO P1.11 multiplexes MCPWM_CH3N, UART0_TXD, SDA, TIM0_CH1, ADC_TRIGGER1, SIF and CLUOUT2, with a built-in 10kΩ pull-up that software can disable.
35 P3_10 bidirectional GPIO P3.10 multiplexes MCPWM_CH4P and is the non-inverting (positive) input of operational amplifier 2 (OPA2_IP).
36 P3_11 bidirectional GPIO P3.11 multiplexes MCPWM_CH4N and is the inverting (negative) input of operational amplifier 2 (OPA2_IN).
37 P2_9 bidirectional GPIO P2.9 multiplexes MCPWM_CH5P, SPI_DI, SCL, CMP0_IP0 and ADC0_CH12, with a built-in 10kΩ pull-up that software can disable.
38 P2_10 bidirectional GPIO P2.10 multiplexes MCPWM_CH5N, SPI_DO and SDA, with a built-in 10kΩ pull-up that software can disable.
39 P3_14 input GPIO P3.14 is the inverting (negative) input of operational amplifier 3 (OPA3_IN).
40 P3_15 input GPIO P3.15 is the non-inverting (positive) input of operational amplifier 3 (OPA3_IP).
41 P2_1 bidirectional GPIO P2.1 multiplexes SPI_CLK, ADC1_CH10 and CMP1_IP0.
42 P2_2 bidirectional GPIO P2.2 multiplexes QEP1_Z and CMP1_IN (comparator 1 inverting input).
43 P2_3 bidirectional GPIO P2.3 multiplexes CMP1_OUT, MCPWM_BKIN0, SPI_CS, TIM0_CH1, QEP0_Z, CLUOUT3, FLT, and EXTI13.
44 P2_4 bidirectional GPIO P2.4 multiplexes CMP0_OUT, HALL_IN0, MCPWM_CH2P, UART1_RXD, SPI_CLK, TIM1_CH0, TIM2_CH0, ADC_TRIGGER0, CAN_RX, CMP1_IP1, FLT, EXTI14 and WK5, with a built-in 10kΩ pull-up that software can disable.
45 P2_5 bidirectional GPIO P2.5 multiplexes CMP1_OUT, HALL_IN1, MCPWM_CH2N, UART1_TXD, SPI_DO, TIM1_CH1, TIM2_CH1, ADC_TRIGGER1, CAN_TX, CMP1_IP2 and FLT, with a built-in 10kΩ pull-up that software can disable.
46 P2_6 bidirectional GPIO P2.6 multiplexes CMP2_OUT, HALL_IN2, MCPWM_CH3P, TIM0_BKIN, TIM3_CH0, ADC_TRIGGER0, SIF, CLUOUT0, CMP1_IP3 and FLT, with a built-in 10kΩ pull-up that software can disable.
47 P2_14 input GPIO P2.14 carries the SWCLK serial-wire debug clock, also multiplexed with SPI_DI and SCL, with a built-in 10kΩ pull-up that software can disable.
48 P2_15 bidirectional GPIO P2.15 carries the SWDIO serial-wire debug data line, also multiplexed with UART0_RXD, SPI_CS, SDA, TIM2_CH1, CLUOUT1, EXTI15 and WK7, with a built-in 10kΩ pull-up that software can disable.

Key specifications

Parameter Value
Manufacturer LINKOSEMI
Package TQFP-48(7x7)
Category Single Chip Microcomputer/Microcontroller
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Digital IO output low voltage (max drive current 11.2 mA) VOL 0.5 V max drive current 11.2mA 66
Digital IO input low voltage VIL 0.8 V AVDD 3.3V 66
Digital IO input high voltage VIH 3.06 V AVDD 5V 66
Digital IO input high voltage VIH 2.07 V AVDD 3.3V 66
Digital IO input high current IIH 1 uA AVDD 5V or 3.3V (single value printed for both) 66
Digital IO input low current IIL -1 uA AVDD 5V or 3.3V (single value printed for both) 66
Digital IO input capacitance CIN 10 pF AVDD 5V or 3.3V (single value printed for both) 66
Pull-up resistor (footnote *) Rpup 8 12 kΩ 66
IO to internal analog circuit connection resistance Rio-ana 100 200 Ω 66
Electrical limit: power supply voltage (AVDD) AVDD -0.3 6 V 65
Electrical limit: pre-driver supply voltage (VCC) VCC -0.3 25 V LKS07x with 6N driver 65
Electrical limit: pre-driver supply voltage (VCC) VCC -0.3 40 V LKS07x with 3P3N driver 65
Operating temperature -40 105 ˚C 65
Storage temperature -40 150 ˚C 65
Junction temperature 125 °C 65
Lead temperature (soldering) 260 °C soldering, 10 s 65
ESD HBM -6000 6000 V HBM 65
Latch-up current -200 200 mA 85℃ 65
GPIO signal input voltage range VIN -0.3 6 V 65
Maximum injection current per GPIO IINJ_PAD -11.2 11.2 mA 65
Maximum injection current, all GPIO IINJ_SUM -50 50 mA 65
Power supply voltage (AVDD) AVDD 2.5 5 5.5 V 65
Analog operating voltage (AVDDA) AVDDA 2.8 5 5.5 V REF2VDD=0, ADC selects 2.4V internal reference 65
Analog operating voltage (AVDDA) AVDDA 2.4 5 5.5 V REF2VDD=1, ADC selects AVDD as reference 65
Pre-driver supply voltage (VCC) VCC 4.5 20 V 071DO/074DO 65

CAD (KiCad official)

  • Symbol: LKS32MC071C8T8
  • Footprint: Package_QFP:TQFP-48_7x7mm_P0.5mm
  • 3D model: TQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: lks32mc071c8t8-etched.step / lks32mc071c8t8-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lks32mc071c8t8.step / lks32mc071c8t8.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: LINKOSEMI datasheet (91 pp, sha256 d7b5cc2187fa2830, retrieved 2026-11-13, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF