LKI8011SS

@@ -0,0 +1,58 @@+# LKI8011SS++**LKWIC** · LVDS ICs · TSSOP-16++LKI8011SS from LKWIC, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN1- | input | Channel 1 LVDS inverting differential input. Internally terminated with the on-die ~107 Ω resistor across IN1+/IN1-. |+| 2 | IN1+ | input | Channel 1 LVDS non-inverting differential input. Paired with IN1- across the internal 107 Ω termination. |+| 3 | IN2+ | input | Channel 2 LVDS non-inverting differential input. Paired with IN2- across the internal 107 Ω termination. |+| 4 | IN2- | input | Channel 2 LVDS inverting differential input. Internally terminated with the on-die ~107 Ω resistor across IN2+/IN2-. |+| 5 | IN3- | input | Channel 3 LVDS inverting differential input. Internally terminated with the on-die ~107 Ω resistor across IN3+/IN3-. |+| 6 | IN3+ | input | Channel 3 LVDS non-inverting differential input. Paired with IN3- across the internal 107 Ω termination. |+| 7 | IN4+ | input | Channel 4 LVDS non-inverting differential input. Paired with IN4- across the internal 107 Ω termination. |+| 8 | IN4- | input | Channel 4 LVDS inverting differential input. Internally terminated with the on-die ~107 Ω resistor across IN4+/IN4-. |+| 9 | EN# | input | Active-low enable input. Outputs are only driven when EN# = L (or open) AND EN = H; any other enable combination forces all four OUTx into the high-impedance state. VIH ≥ 2.0 V, VIL ≤ 0.8 V. |+| 10 | OUT4 | output | Channel 4 LVTTL/LVCMOS single-ended receiver output. Drives VOH ≥ 2.7 V at IOH = -4 mA and VOL ≤ 0.5 V at IOL = 4 mA when the corresponding differential input |VID| ≥ 100 mV. |+| 11 | OUT3 | output | Channel 3 LVTTL/LVCMOS single-ended receiver output. Drives VOH ≥ 2.7 V at IOH = -4 mA and VOL ≤ 0.5 V at IOL = 4 mA when the corresponding differential input |VID| ≥ 100 mV. |+| 12 | GND | power_in | Ground return for the device. Connect to the board 0 V plane. |+| 13 | VCC | power_in | 3.3 V supply input (recommended 3.0 V to 3.6 V, absolute max 4.0 V). Bypass with a 10 µF bulk cap and a 0.01 µF ceramic placed as close to the pin as possible; typical ICC ≈ 9 mA (20 mA max). |+| 14 | OUT2 | output | Channel 2 LVTTL/LVCMOS single-ended receiver output. Drives VOH ≥ 2.7 V at IOH = -4 mA and VOL ≤ 0.5 V at IOL = 4 mA when the corresponding differential input |VID| ≥ 100 mV. |+| 15 | OUT1 | output | Channel 1 LVTTL/LVCMOS single-ended receiver output. Drives VOH ≥ 2.7 V at IOH = -4 mA and VOL ≤ 0.5 V at IOL = 4 mA when the corresponding differential input |VID| ≥ 100 mV. |+| 16 | EN | input | Active-high enable input. Outputs are only driven when EN = H AND EN# = L (or open); any other enable combination forces all four OUTx into the high-impedance state. VIH ≥ 2.0 V, VIL ≤ 0.8 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | LKWIC |+| Package | TSSOP-16 |+| Category | Interface |+| Pins | 16 |++## Ordering variants++Same part, different packaging or reel option.++- `LKI8011SS`++## CAD (KiCad official)++- Symbol: `LKI8011SS`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [LKWIC datasheet](docs/lki8011ss-datasheet.pdf) (10 pp, sha256 `ebd3114250a12870`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lki8011ss-datasheet.pdf)

@@ -0,0 +1,34 @@+{+  "slug": "lki8011ss",+  "version": "0.1.0",+  "type": "component",+  "description": "LKWIC LVDS ICs, TSSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "lki8011ss"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lki8011ss.kicad_sym",+    "lki8011ss.kicad_mod",+    "lki8011ss.glb",+    "lki8011ss.step",+    "lki8011ss.lbr",+    "docs/hero.png",+    "docs/lki8011ss-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file