main
Ray
Publish 0.1.0
dc75922
LKI29223SS
LKWIC · LVDS ICs · TSSOP-16
LKI29223SS from LKWIC, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable input, active high; used together with EN# to set the four LVDS outputs to high impedance when not both enables are asserted. |
| 2 | IN1 | input | Driver input 1 accepting LVTTL/LVCMOS levels, converted to LVDS output channel 1. |
| 3 | IN2 | input | Driver input 2 accepting LVTTL/LVCMOS levels, converted to LVDS output channel 2. |
| 4 | VCC | power_in | Power supply pin; recommended operating supply range is 3.0 V to 3.6 V with absolute maximum of 4 V. |
| 5 | GND | power_in | Ground pin for the device. |
| 6 | IN3 | input | Driver input 3 accepting LVTTL/LVCMOS levels, converted to LVDS output channel 3. |
| 7 | IN4 | input | Driver input 4 accepting LVTTL/LVCMOS levels, converted to LVDS output channel 4. |
| 8 | EN# | input | Active-low enable input; used together with EN to set the four LVDS outputs to high impedance when not both enables are asserted. |
| 9 | OUT4- | output | Inverting LVDS output 4. |
| 10 | OUT4+ | output | Non-inverting LVDS output 4. |
| 11 | OUT3+ | output | Non-inverting LVDS output 3. |
| 12 | OUT3- | output | Inverting LVDS output 3. |
| 13 | OUT2- | output | Inverting LVDS output 2. |
| 14 | OUT2+ | output | Non-inverting LVDS output 2. |
| 15 | OUT1+ | output | Non-inverting LVDS output 1. |
| 16 | OUT1- | output | Inverting LVDS output 1. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LKWIC |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.3 | 4 | V | 5 | ||
| Output voltage | VOUT | -0.3 | 3.9 | V | 5 | ||
| Input voltage (INx) | VIN | -0.3 | V | max printed as VCC+0.3 V | 5 | ||
| Enable input voltage (EN, EN#) | VIN | -0.3 | V | max printed as VCC+0.3 V | 5 | ||
| Storage temperature | Tstg | -65 | 150 | ℃ | 5 | ||
| Lead soldering temperature | Th | 240 | 250 | ℃ | 5s | 5 | |
| Junction temperature | Tj | 150 | ℃ | 5 | |||
| Supply voltage | VCC | 3 | 3.6 | V | 5 | ||
| Input high level voltage | VIH | 2 | V | 5 | |||
| Input low level voltage | VIL | 0.8 | V | 5 | |||
| Operating temperature | TA | -40 | 85 | ℃ | 5 | ||
| No-load supply current | ICC | 10.64 | 11 | mA | RL悬空,VIN=VCC | 6 | |
| Loaded supply current | ICCL | 22.21 | 40 | mA | RL=100Ω,VIN=VCC | 6 | |
| High-impedance supply current | ICCZ | 5.48 | 6 | mA | VEN=0V,VIN=VCC | 6 | |
| Output differential voltage | VOD | 250 | 350 | 450 | mV | VIN=VCC,负载 RL=100Ω | 6 |
| Output common-mode voltage | VOS | 1.125 | 1.21 | 1.375 | V | VIN=VCC,负载 RL=100Ω | 6 |
| Output high voltage | VOH | 1.38 | 1.6 | V | 6 | ||
| Output low voltage | VOL | 0.9 | 1.03 | V | 6 | ||
| Input high level voltage | VIH | 2 | 2 | 3.3 | V | 6 | |
| Input low level voltage | VIL | 0 | 0.8 | 0.8 | V | 6 | |
| High-to-low differential propagation delay | tPHLD | 1.32 | 3 | ns | VIL=0V,VIH=3V,f=100MHz,RL=100Ω,50%占空比,CL=15pF | 6 | |
| Low-to-high differential propagation delay | tPLHD | 1.33 | 3 | ns | VIL=0V,VIH=3V,f=100MHz,RL=100Ω,50%占空比,CL=15pF | 6 | |
| Rise time | tTLH | 0.2 | 0.37 | 1 | ns | 6 | |
| Fall time | tTHL | 0.2 | 0.41 | 1 | ns | 6 | |
| Output high to high-Z turn-off time | tPHZ | 3.24 | 5 | ns | VIN=VCC,负载 RL=100Ω,CL=15pF,在负载电阻中点接 1.2V 电压 | 6 | |
| Output low to high-Z turn-off time | tPLZ | 3.61 | 5 | ns | VIN=VCC,负载 RL=100Ω,CL=15pF,在负载电阻中点接 1.2V 电压 | 6 | |
| High-Z to output high turn-on time | tPZH | 2.32 | 7 | ns | 6 | ||
| High-Z to output low turn-on time | tPZL | 2.39 | 7 | ns | 6 | ||
| Maximum operating frequency | fMAX | 400 | MHz | VIL=0V,VIH=3V,f=400MHz,RL=100Ω,50%占空比,负载 RL=100Ω,CL=15pF | 6 | ||
| Output short-circuit current | IOS | -3.8 | -9 | mA | OUT_+=0 at IN_=VCC or OUT_-=0 at IN_=0,已启用 | 6 | |
| Output high-impedance current | IOZ | -10 | 10 | uA | EN=低和 EN=高,OUT_+ = 0 或 VCC,OUT_- = 0 或 VCC,RL =∞ | 6 | |
| Power-off output current | IOFF | -20 | 20 | uA | VCC = 0 or 开路,OUT_+ = 0 or 3.6V,OUT_-= 0 or 3.6V,RL = ∞ | 6 |
CAD (KiCad official)
- Symbol:
LKI29223SS - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
lki29223ss-etched.step/lki29223ss-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lki29223ss.step/lki29223ss.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LKWIC datasheet (12 pp, sha256
e1a86622e074c26e, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusoff(skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LKI29223SS
**LKWIC** · LVDS ICs · TSSOP-16
LKI29223SS from LKWIC, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable input, active high; used together with EN# to set the four LVDS outputs to high impedance when not both enables are asserted. |
| 2 | IN1 | input | Driver input 1 accepting LVTTL/LVCMOS levels, converted to LVDS output channel 1. |
| 3 | IN2 | input | Driver input 2 accepting LVTTL/LVCMOS levels, converted to LVDS output channel 2. |
| 4 | VCC | power_in | Power supply pin; recommended operating supply range is 3.0 V to 3.6 V with absolute maximum of 4 V. |
| 5 | GND | power_in | Ground pin for the device. |
| 6 | IN3 | input | Driver input 3 accepting LVTTL/LVCMOS levels, converted to LVDS output channel 3. |
| 7 | IN4 | input | Driver input 4 accepting LVTTL/LVCMOS levels, converted to LVDS output channel 4. |
| 8 | EN# | input | Active-low enable input; used together with EN to set the four LVDS outputs to high impedance when not both enables are asserted. |
| 9 | OUT4- | output | Inverting LVDS output 4. |
| 10 | OUT4+ | output | Non-inverting LVDS output 4. |
| 11 | OUT3+ | output | Non-inverting LVDS output 3. |
| 12 | OUT3- | output | Inverting LVDS output 3. |
| 13 | OUT2- | output | Inverting LVDS output 2. |
| 14 | OUT2+ | output | Non-inverting LVDS output 2. |
| 15 | OUT1+ | output | Non-inverting LVDS output 1. |
| 16 | OUT1- | output | Inverting LVDS output 1. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LKWIC |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.3 | | 4 | V | | 5 |
| Output voltage | VOUT | -0.3 | | 3.9 | V | | 5 |
| Input voltage (INx) | VIN | -0.3 | | | V | max printed as VCC+0.3 V | 5 |
| Enable input voltage (EN, EN#) | VIN | -0.3 | | | V | max printed as VCC+0.3 V | 5 |
| Storage temperature | Tstg | -65 | | 150 | ℃ | | 5 |
| Lead soldering temperature | Th | 240 | | 250 | ℃ | 5s | 5 |
| Junction temperature | Tj | | | 150 | ℃ | | 5 |
| Supply voltage | VCC | 3 | | 3.6 | V | | 5 |
| Input high level voltage | VIH | 2 | | | V | | 5 |
| Input low level voltage | VIL | | | 0.8 | V | | 5 |
| Operating temperature | TA | -40 | | 85 | ℃ | | 5 |
| No-load supply current | ICC | | 10.64 | 11 | mA | RL悬空,VIN=VCC | 6 |
| Loaded supply current | ICCL | | 22.21 | 40 | mA | RL=100Ω,VIN=VCC | 6 |
| High-impedance supply current | ICCZ | | 5.48 | 6 | mA | VEN=0V,VIN=VCC | 6 |
| Output differential voltage | VOD | 250 | 350 | 450 | mV | VIN=VCC,负载 RL=100Ω | 6 |
| Output common-mode voltage | VOS | 1.125 | 1.21 | 1.375 | V | VIN=VCC,负载 RL=100Ω | 6 |
| Output high voltage | VOH | | 1.38 | 1.6 | V | | 6 |
| Output low voltage | VOL | 0.9 | 1.03 | | V | | 6 |
| Input high level voltage | VIH | 2 | 2 | 3.3 | V | | 6 |
| Input low level voltage | VIL | 0 | 0.8 | 0.8 | V | | 6 |
| High-to-low differential propagation delay | tPHLD | | 1.32 | 3 | ns | VIL=0V,VIH=3V,f=100MHz,RL=100Ω,50%占空比,CL=15pF | 6 |
| Low-to-high differential propagation delay | tPLHD | | 1.33 | 3 | ns | VIL=0V,VIH=3V,f=100MHz,RL=100Ω,50%占空比,CL=15pF | 6 |
| Rise time | tTLH | 0.2 | 0.37 | 1 | ns | | 6 |
| Fall time | tTHL | 0.2 | 0.41 | 1 | ns | | 6 |
| Output high to high-Z turn-off time | tPHZ | | 3.24 | 5 | ns | VIN=VCC,负载 RL=100Ω,CL=15pF,在负载电阻中点接 1.2V 电压 | 6 |
| Output low to high-Z turn-off time | tPLZ | | 3.61 | 5 | ns | VIN=VCC,负载 RL=100Ω,CL=15pF,在负载电阻中点接 1.2V 电压 | 6 |
| High-Z to output high turn-on time | tPZH | | 2.32 | 7 | ns | | 6 |
| High-Z to output low turn-on time | tPZL | | 2.39 | 7 | ns | | 6 |
| Maximum operating frequency | fMAX | 400 | | | MHz | VIL=0V,VIH=3V,f=400MHz,RL=100Ω,50%占空比,负载 RL=100Ω,CL=15pF | 6 |
| Output short-circuit current | IOS | | -3.8 | -9 | mA | OUT_+=0 at IN_=VCC or OUT_-=0 at IN_=0,已启用 | 6 |
| Output high-impedance current | IOZ | -10 | | 10 | uA | EN=低和 EN=高,OUT_+ = 0 或 VCC,OUT_- = 0 或 VCC,RL =∞ | 6 |
| Power-off output current | IOFF | -20 | | 20 | uA | VCC = 0 or 开路,OUT_+ = 0 or 3.6V,OUT_-= 0 or 3.6V,RL = ∞ | 6 |
## CAD (KiCad official)
- Symbol: `LKI29223SS`
- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`
- 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files: `lki29223ss-etched.step` / `lki29223ss-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lki29223ss.step` / `lki29223ss.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [LKWIC datasheet](docs/lki29223ss-datasheet.pdf) (12 pp, sha256 `e1a86622e074c26e`, retrieved 2026-10-27, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `off` (skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lki29223ss-datasheet.pdf)