main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lki29222ss: viewers · Ray
lki29222ss-etched.glb Publish 0.1.0 · Ray
lki29222ss-etched.step lki29222ss: factory component page (tier=lcsc) · Ray
lki29222ss-hero.glb lki29222ss: hero GLB from the etched model (keeps the MPN mark) · Ray
lki29222ss-hero.overlay.json Publish 0.1.0 · Ray
lki29222ss.glb Publish 0.1.0 · Ray
lki29222ss.kicad_mod Publish 0.1.0 · Ray
lki29222ss.kicad_sym Publish 0.1.0 · Ray
lki29222ss.lbr Publish 0.1.0 · Ray
lki29222ss.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

LKI29222SS

LKWIC · LVDS ICs · TSSOP-16

LKI29222SS from LKWIC, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN1- input Inverting LVDS input of receiver channel 1, which with IN1+ forms the differential input (typical input differential resistance 110 Ω with the internal termination).
2 IN1+ input Non-inverting LVDS input of receiver channel 1, which with IN1- forms the differential input; the common-mode input range is 0.05 V to 2.35 V.
3 IN2+ input Non-inverting LVDS input of receiver channel 2; the common-mode input range is 0.05 V to 2.35 V.
4 IN2- input Inverting LVDS input of receiver channel 2, which with IN2+ forms the differential input.
5 IN3- input Inverting LVDS input of receiver channel 3, which with IN3+ forms the differential input.
6 IN3+ input Non-inverting LVDS input of receiver channel 3, which with IN3- forms the differential input.
7 IN4+ input Non-inverting LVDS input of receiver channel 4, which with IN4- forms the differential input.
8 IN4- input Inverting LVDS input of receiver channel 4, which with IN4+ forms the differential input.
9 EN# input Active-low enable input; when driven high together with EN low, the outputs are placed in the high-impedance state (VIH min 2.0 V, VIL max 0.8 V).
10 OUT4 output LVTTL/LVCMOS receiver output of channel 4, which goes to high-impedance when the device is disabled.
11 OUT3 output LVTTL/LVCMOS receiver output of channel 3, which goes to high-impedance when the device is disabled.
12 GND power_in Ground reference pin for the device.
13 VCC power_in Power supply pin; recommended supply range is 3.0 V to 3.6 V, with 10 µF and 0.01 µF bypass capacitors placed close to VCC.
14 OUT2 output LVTTL/LVCMOS receiver output of channel 2, which goes to high-impedance when the device is disabled.
15 OUT1 output LVTTL/LVCMOS receiver output of channel 1, which goes to high-impedance when the device is disabled.
16 EN input Active-high enable input; the outputs are in the high-impedance state when EN is low or when EN# is high (VIH min 2.0 V, VIL max 0.8 V).

Key specifications

Parameter Value
Manufacturer LKWIC
Package TSSOP-16
Category Interface
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
电源电压 VCC -0.3 4 V 5
输入端电压(INx+,INx-) VIN -0.3 4 V 5
贮存温度 Tstg -65 150 ℃ 5
电源电压 VCC 3 3.6 V 5
工作温度 TA -40 85 ℃ 5
差分输入电阻 RDIFF 85 110 132 Ω TA=25℃ 6
输出高电平电压 VOH 2.7 3.29 V IOH=-4.0mA,VID=100mV 6
输出低电平电压 VOL 0.04 0.5 V IOL=4.0mA,VID=-100mV 6
电源电流 ICC 9 20 mA 使能有效,输入开路 6
输入差分高阈值电压 VTH 100 mV 6
输入差分低阈值电压 VTL -100 mV 6
输入低电平电压(EN,EN#) VIL 0 0.8 V 6
低到高延迟时间 tPLHD 2.55 4 ns VID=0.2V,VCM=1.2V,CL=15pF 6
高到低延迟时间 tPHLD 2.7 4 ns 6
上升时间 tTLH 0.55 1 ns 6
下降时间 tTHL 0.54 1 ns 6
最高工作频率 fMAX 250 MHz 所有通道开启 6
输出短路电流 IOS -120 -15 mA 使能,VID = 0.1V,VOUT_ = 0V 6
输出三态电流 IOZ -10 10 μA 禁能,VOUT=0V 或 VCC 6
输入电流(EN,EN#) IIN -15 15 μA VIN_ = VCC or 0V 6

CAD (KiCad official)

  • Symbol: LKI29222SS
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: lki29222ss-etched.step / lki29222ss-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lki29222ss.step / lki29222ss.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: LKWIC datasheet (10 pp, sha256 a5cfc62499c2ef35, retrieved 2026-10-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF