Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LK112M33TR

STMicroelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5

LK112M33TR from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SHDN input Shutdown input that disables the regulator when connected to GND or positive voltage less than 0.6 V, and enables the output when voltage is above 1.8 V.
2 GND power_in Ground pin internally connected to the die attach flag to decrease the total thermal resistance and increase the package ability to dissipate power.
3 Bypass passive Bypass pin for 0.1 µF capacitor to improve the noise performance and reduce output noise to 30 µVrms at 10 Hz to 80 kHz.
4 OUT output Output port providing 3.3 V regulated voltage with output current up to 150 mA and low-dropout of 0.35 V maximum at 150 mA.
5 IN power_in Input port with operative input voltage from VOUT + 0.5 V to 14 V for VOUT > 2 V, or from 2.5 V to 14 V for VOUT < 2 V.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOT-23-5
Category Power Management (PMIC)
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage accuracy VO -2 2 % IO = 30mA 6
Quiescent current, On mode (except ISHDN) Iq 175 250 µA 6
Quiescent current, Off mode Iq 0.1 µA VI = 8V, VSHDN = 0V 6
Line regulation (VO ≤ 5.6 V) ΔVO 0.7 20 mV VI = VO+1V to VO+6V, VO ≤ 5.6V 6
Load regulation ΔVO 15 30 mV IO = 1 to 60mA 6
Load regulation ΔVO 25 90 mV IO = 1 to 150mA 6
Dropout voltage Vd 0.17 0.24 V IO = 60mA 6
Dropout voltage Vd 0.29 0.35 V IO = 150mA 6
Shutdown input current ISHDN 12 35 µA VSHDN = 1.8V, output on 6
Shutdown input logic, output off VSHDN 0.6 V Output off 6
DC input voltage VI 16 V 5
DC input voltage (shutdown pin) VSHDN 16 V 5
Storage temperature range TSTG -55 150 °C 5
Operating junction temperature range TOP -40 125 °C 5
Operative input voltage (VOUT > 2 V) VI 14 V VOUT > 2 V; minimum is printed as VOUT + 0.5 V 1
Output noise voltage eN 30 µVrms B= 10Hz to 80kHz, CBYP = 0.1µF, CO = 10µF, VI = VO+1.5V, IO = 60mA 6
Output current limit IO 150 mA 6
Supply voltage rejection SVR 55 dB VI = VO+1.5V, CBYP = 0.1µF, CO = 10µF, f = 400Hz, IO = 30mA 6
Output voltage temperature coefficient ΔVO/TJ 0.09 mV/°C IO = 10mA 6
Shutdown input logic, output on VSHDN 1.8 V Output on 6
Thermal resistance junction-case (SOT23-5L) RthJC 81 °C/W 5
Thermal resistance junction-ambient (SOT23-5L) RthJA 255 °C/W 5

CAD (KiCad official)

  • Symbol: LK112M33TR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: lk112m33tr-etched.step / lk112m33tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lk112m33tr.step / lk112m33tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (18 pp, sha256 fc1c9dfacf62927c, retrieved 2026-09-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF