main
Ray
lj3405: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
c0c5dc9
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198
{
"schema_version": 1,
"type": "component",
"slug": "lj3405",
"title": "LJ3405",
"brief": "GUOXIN JIAPIN SEMICONDUCTOR Human Body Sensing Sensor, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
"version": "0.2.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"sensor",
"lj3405"
],
"component": {
"mpn": "LJ3405",
"manufacturer": "GUOXIN JIAPIN SEMICONDUCTOR",
"package": "SOP-8",
"pin_count": 8,
"category": "Sensor",
"subcategory": "Human Body Sensing Sensor",
"datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2204211700_GUOXIN-JIAPIN-SEMICONDUCTOR-LJ3405_C2992567.pdf",
"parts": {
"symbol": "lj3405.kicad_sym",
"footprint": "lj3405.kicad_mod",
"model_3d": "lj3405-etched.glb",
"model_3d_plain": "lj3405.glb",
"model_3d_step": "lj3405-etched.step",
"model_3d_step_plain": "lj3405.step",
"lbr": "lj3405.lbr"
},
"distributor_links": {},
"pins": [
{
"number": "1",
"name": "E1OUT",
"type": "output",
"description": "Output of the internal first-stage op-amp. Connect the gain-setting feedback network (R3/C3 in the typical circuit) between this pin and E1IN."
},
{
"number": "2",
"name": "E1IN",
"type": "input",
"description": "Inverting input of the internal first-stage op-amp. Non-inverting input is internally biased at 0.3 VDD; drive the PIR AC output into this pin through an AC-coupling capacitor."
},
{
"number": "3",
"name": "VC",
"type": "input",
"description": "Trigger inhibit input. When VC < 0.2 VDD triggering is inhibited and OUT is forced low; when VC > 0.2 VDD triggering is enabled and OUT follows the input signal. VDD=5V: VIH ≥ 1.1 V, VIL ≤ 0.5 V; VDD=3V: VIH ≥ 0.7 V, VIL ≤ 0.4 V."
},
{
"number": "4",
"name": "A",
"type": "input",
"description": "Retrigger-mode select. A=1 enables retriggerable operation (Tx timer restarts on new triggers); A=0 selects non-retriggerable mode. VDD=5V: VIH ≥ 3.5 V, VIL ≤ 0.7 V; VDD=3V: VIH ≥ 2 V, VIL ≤ 0.5 V."
},
{
"number": "5",
"name": "GND",
"type": "power_in",
"description": "Chip ground reference (0 V). All bypass caps and the CT timing capacitor return here."
},
{
"number": "6",
"name": "OUT",
"type": "output",
"description": "Active-high control signal output. Drives ~10 mA at VDD=5V (VOH ≥ 4.3 V, VOL ≤ 0.6 V) and ~3 mA at VDD=3V. Goes high for the Tx delay after a valid trigger, then low during the Ti blocking period."
},
{
"number": "7",
"name": "CT",
"type": "passive",
"description": "Oscillator timing pin. Requires an external timing capacitor CT to GND and a pull-up resistor RT (>80 kΩ) to VDD. Frequency set by Tosc ≈ 0.4·CT·RT·(RT/(RT−27)) (RT in kΩ, CT in nF, Tosc in μs). Tx = 100000·Tosc; K=Tx/Ti default 14."
},
{
"number": "8",
"name": "VIN",
"type": "power_in",
"description": "Positive supply input (also referred to internally as VDD). Operating range 3 V to 6 V; absolute max 7 V. ICC typ 30 uA @ 3 V, 60 uA @ 5 V."
}
],
"provenance": {
"extractor": "ds2sf",
"datasheet": {
"url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2204211700_GUOXIN-JIAPIN-SEMICONDUCTOR-LJ3405_C2992567.pdf",
"pages": 9,
"sha256": "819c87b69c45624a",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 8,
"described": 8,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lj3405.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lj3405-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "4ed047884e864852768b38ecedc4ed09a7c20633241252906db8ec3b60f036ff",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "GUOXIN JIAPIN SEMICONDUCTOR",
"Package": "SOP-8",
"Category": "Sensor",
"Pins": "8"
}
},
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"lj3405"
],
"discovery_pitch": "LJ3405 (GUOXIN JIAPIN SEMICONDUCTOR) component page with datasheet-verified CAD.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lj3405.kicad_sym",
"lj3405.kicad_mod",
"lj3405.glb",
"lj3405.step",
"lj3405-etched.step",
"lj3405.lbr",
"docs/hero.png",
"docs/lj3405-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"visibility": {
"public": true
},
"variants": [
{
"mpn": "LJ3405SR-G",
"kind": "packaging"
},
{
"mpn": "LJ3405CPR-G",
"kind": "packaging"
}
],
"updated_at": "2026-09-24T23:59:25.809Z"
}