main
Ray
Publish 0.1.0
7b94b82
LIS2DW12TR
STMicroelectronics · Accelerometers · LGA-12
LIS2DW12TR from STMicroelectronics, in a LGA-12. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCL/SPC | input | I²C serial clock (SCL) in I²C mode and SPI serial port clock (SPC) in SPI mode. |
| 2 | CS | input | Selects the interface: 1 enables I²C with SPI idle, 0 selects SPI with I²C disabled, and the pin is internally pulled up (20.4 kΩ typ. at 3.6 V Vdd_IO). |
| 3 | SDO/SA0 | bidirectional | SPI serial data output (SDO) or I²C least significant bit of the device address (SA0), internally pulled up. |
| 4 | SDA/SDI/SDO | bidirectional | I²C serial data (SDA), SPI serial data input (SDI), or 3-wire interface serial data output (SDO). |
| 5 | NC | unconnected | Internally not connected; can be tied to VDD, VDDIO, or GND. |
| 6 | GND | power_in | 0 V supply. |
| 7 | RES | passive | Reserved pin; connect to GND. |
| 8 | GND | power_in | 0 V supply. |
| 9 | VDD | power_in | Core power supply, operating range 1.62 V to 3.6 V; decoupling capacitors (100 nF ceramic, 10 µF aluminum) should be placed as near as possible to this pin. |
| 10 | VDD_IO | power_in | Power supply for the I/O pins, which can remain powered while VDD is removed without blocking the communication bus. |
| 11 | INT2 | bidirectional | Interrupt pin 2, also the clock input when single data conversion on demand is selected. |
| 12 | INT1 | output | Interrupt pin 1, programmable through the I²C/SPI interface. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LGA-12 |
| Category | Sensors |
| Pins | 12 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | Vdd | 1.62 | 1.8 | 3.6 | V | 7 | |
| I/O pins supply voltage | Vdd_IO | 1.62 | V | 7 | |||
| Supply current in high-performance mode | IddHR | 90 | µA | @ ODR range 12.5 Hz - 1600 Hz, 14-bit | 7 | ||
| Supply current in low-power mode | IddLP | 5 | µA | ODR 100 Hz | 7 | ||
| Supply current in low-power mode | IddLP | 3 | µA | ODR 50 Hz | 7 | ||
| Supply current in low-power mode | IddLP | 1 | µA | ODR 12.5 Hz | 7 | ||
| Supply current in low-power mode | IddLP | 0.38 | µA | ODR 1.6 Hz | 7 | ||
| Supply current in power-down | Idd_PD | 50 | nA | 7 | |||
| Digital low-level output voltage | VOL | 0.2 | V | IOL = 4 mA | 7 | ||
| Operating temperature range | Top | -40 | 85 | °C | 8 | ||
| Temperature offset | Toff | -15 | 15 | °C | 8 | ||
| Zero-g level offset accuracy | Toff | -20 | 20 | mg | 6 | ||
| Zero-g offset change vs. temperature | TCO | -0.2 | 0.2 | mg/°C | 6 | ||
| Self-test positive difference | ST | 70 | 1500 | mg | 6 | ||
| Supply voltage | Vdd | -0.3 | 4.8 | V | 12 | ||
| I/O pins supply voltage | Vdd_IO | -0.3 | 4.8 | V | 12 | ||
| Input voltage on any control pin | Vin | -0.3 | V | CS, SCL/SPC, SDA/SDI/SDO, SDO/SA0 | 12 | ||
| Acceleration (powered) | APOW | 3000 | g | any axis, powered, Vdd = 1.8 V, 0.5 ms | 12 | ||
| Acceleration (powered) | APOW | 10000 | g | any axis, powered, Vdd = 1.8 V, 0.2 ms | 12 | ||
| Acceleration (unpowered) | AUNP | 3000 | g | any axis, unpowered, 0.5 ms | 12 | ||
| Acceleration (unpowered) | AUNP | 10000 | g | any axis, unpowered, 0.2 ms | 12 | ||
| Operating temperature range | TOP | -40 | 85 | °C | 12 | ||
| Storage temperature range | TSTG | -40 | 125 | °C | 12 | ||
| Electrostatic discharge protection | ESD | 2 | kV | HBM | 12 | ||
| SPI clock cycle | tc(SPC) | 100 | ns | 9 | |||
| SPI clock frequency | fc(SPC) | 10 | MHz | 9 | |||
| CS setup time | tsu(CS) | 6 | ns | 9 | |||
| CS hold time | th(CS) | 8 | ns | 9 | |||
| SDI input setup time | tsu(SI) | 12 | ns | 9 | |||
| SDI input hold time | th(SI) | 15 | ns | 9 | |||
| SDO valid output time | tv(SO) | 50 | ns | 9 | |||
| SDO output hold time | th(SO) | 9 | ns | 9 | |||
| SDO output disable time | tdis(SO) | 50 | ns | 9 | |||
| Temperature sensor output change vs. temperature | TSDr | 1 | LSB/°C | 8-bit resolution | 8 | ||
| Temperature sensor output change vs. temperature | TSDr | 16 | LSB/°C | 12-bit resolution | 8 | ||
| Sensitivity change vs. temperature | TCS | 0.01 | %/°C | 6 |
CAD (KiCad official)
- Symbol:
LIS2DW12TR - Footprint:
Package_LGA:LGA-12_2x2mm_P0.5mm - 3D model: LGA-12, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.7 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lis2dw12tr-etched.step/lis2dw12tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lis2dw12tr.step/lis2dw12tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (65 pp, sha256
5208623aa91c63a3, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LIS2DW12TR
**STMicroelectronics** · Accelerometers · LGA-12
LIS2DW12TR from STMicroelectronics, in a LGA-12. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCL/SPC | input | I²C serial clock (SCL) in I²C mode and SPI serial port clock (SPC) in SPI mode. |
| 2 | CS | input | Selects the interface: 1 enables I²C with SPI idle, 0 selects SPI with I²C disabled, and the pin is internally pulled up (20.4 kΩ typ. at 3.6 V Vdd_IO). |
| 3 | SDO/SA0 | bidirectional | SPI serial data output (SDO) or I²C least significant bit of the device address (SA0), internally pulled up. |
| 4 | SDA/SDI/SDO | bidirectional | I²C serial data (SDA), SPI serial data input (SDI), or 3-wire interface serial data output (SDO). |
| 5 | NC | unconnected | Internally not connected; can be tied to VDD, VDDIO, or GND. |
| 6 | GND | power_in | 0 V supply. |
| 7 | RES | passive | Reserved pin; connect to GND. |
| 8 | GND | power_in | 0 V supply. |
| 9 | VDD | power_in | Core power supply, operating range 1.62 V to 3.6 V; decoupling capacitors (100 nF ceramic, 10 µF aluminum) should be placed as near as possible to this pin. |
| 10 | VDD_IO | power_in | Power supply for the I/O pins, which can remain powered while VDD is removed without blocking the communication bus. |
| 11 | INT2 | bidirectional | Interrupt pin 2, also the clock input when single data conversion on demand is selected. |
| 12 | INT1 | output | Interrupt pin 1, programmable through the I²C/SPI interface. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LGA-12 |
| Category | Sensors |
| Pins | 12 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | Vdd | 1.62 | 1.8 | 3.6 | V | | 7 |
| I/O pins supply voltage | Vdd_IO | 1.62 | | | V | | 7 |
| Supply current in high-performance mode | IddHR | | | 90 | µA | @ ODR range 12.5 Hz - 1600 Hz, 14-bit | 7 |
| Supply current in low-power mode | IddLP | | | 5 | µA | ODR 100 Hz | 7 |
| Supply current in low-power mode | IddLP | | | 3 | µA | ODR 50 Hz | 7 |
| Supply current in low-power mode | IddLP | | | 1 | µA | ODR 12.5 Hz | 7 |
| Supply current in low-power mode | IddLP | | | 0.38 | µA | ODR 1.6 Hz | 7 |
| Supply current in power-down | Idd_PD | | | 50 | nA | | 7 |
| Digital low-level output voltage | VOL | | | 0.2 | V | IOL = 4 mA | 7 |
| Operating temperature range | Top | -40 | | 85 | °C | | 8 |
| Temperature offset | Toff | -15 | | 15 | °C | | 8 |
| Zero-g level offset accuracy | Toff | -20 | | 20 | mg | | 6 |
| Zero-g offset change vs. temperature | TCO | -0.2 | | 0.2 | mg/°C | | 6 |
| Self-test positive difference | ST | 70 | | 1500 | mg | | 6 |
| Supply voltage | Vdd | -0.3 | | 4.8 | V | | 12 |
| I/O pins supply voltage | Vdd_IO | -0.3 | | 4.8 | V | | 12 |
| Input voltage on any control pin | Vin | -0.3 | | | V | CS, SCL/SPC, SDA/SDI/SDO, SDO/SA0 | 12 |
| Acceleration (powered) | APOW | | | 3000 | g | any axis, powered, Vdd = 1.8 V, 0.5 ms | 12 |
| Acceleration (powered) | APOW | | | 10000 | g | any axis, powered, Vdd = 1.8 V, 0.2 ms | 12 |
| Acceleration (unpowered) | AUNP | | | 3000 | g | any axis, unpowered, 0.5 ms | 12 |
| Acceleration (unpowered) | AUNP | | | 10000 | g | any axis, unpowered, 0.2 ms | 12 |
| Operating temperature range | TOP | -40 | | 85 | °C | | 12 |
| Storage temperature range | TSTG | -40 | | 125 | °C | | 12 |
| Electrostatic discharge protection | ESD | | | 2 | kV | HBM | 12 |
| SPI clock cycle | tc(SPC) | 100 | | | ns | | 9 |
| SPI clock frequency | fc(SPC) | | | 10 | MHz | | 9 |
| CS setup time | tsu(CS) | 6 | | | ns | | 9 |
| CS hold time | th(CS) | 8 | | | ns | | 9 |
| SDI input setup time | tsu(SI) | 12 | | | ns | | 9 |
| SDI input hold time | th(SI) | 15 | | | ns | | 9 |
| SDO valid output time | tv(SO) | | | 50 | ns | | 9 |
| SDO output hold time | th(SO) | 9 | | | ns | | 9 |
| SDO output disable time | tdis(SO) | | | 50 | ns | | 9 |
| Temperature sensor output change vs. temperature | TSDr | | 1 | | LSB/°C | 8-bit resolution | 8 |
| Temperature sensor output change vs. temperature | TSDr | | 16 | | LSB/°C | 12-bit resolution | 8 |
| Sensitivity change vs. temperature | TCS | | 0.01 | | %/°C | | 6 |
## CAD (KiCad official)
- Symbol: `LIS2DW12TR`
- Footprint: `Package_LGA:LGA-12_2x2mm_P0.5mm`
- 3D model: LGA-12, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.7 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `lis2dw12tr-etched.step` / `lis2dw12tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lis2dw12tr.step` / `lis2dw12tr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/lis2dw12tr.pdf) (65 pp, sha256 `5208623aa91c63a3`, retrieved 2026-11-12, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lis2dw12tr-datasheet.pdf)