main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs lis2dtw12tr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lis2dtw12tr: viewers · Ray
lis2dtw12tr-etched.fit.json lis2dtw12tr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lis2dtw12tr-etched.glb lis2dtw12tr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lis2dtw12tr-etched.step lis2dtw12tr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lis2dtw12tr.glb Publish 0.1.0 · Ray
lis2dtw12tr.kicad_mod Publish 0.1.0 · Ray
lis2dtw12tr.kicad_sym Publish 0.1.0 · Ray
lis2dtw12tr.lbr Publish 0.1.0 · Ray
lis2dtw12tr.step Publish 0.1.0 · Ray
package.json lis2dtw12tr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json lis2dtw12tr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/lis2dtw12tr · Ray

LIS2DTW12TR

STMicroelectronics · Accelerometers · LGA-12(2x2)

LIS2DTW12TR from STMicroelectronics, in a LGA-12(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SCL/SPC bidirectional I²C serial clock (open-drain) or SPI port clock input; enables clock stretching in I²C mode.
2 CS input SPI chip select; pulled low enables SPI mode, held high to VDD_IO enables I²C mode.
3 SDO/SA0 output SPI serial data output with internal pull-up to VDD; or I²C slave address selection bit (SA0) in I²C mode.
4 SDA/SDI/SDO bidirectional I²C serial data line (open-drain), SPI input data (4-wire mode), or SPI output data (3-wire mode) depending on interface configuration.
5 NC unconnected Internally not connected; may be tied to VDD, VDD_IO, or GND without functional impact.
6 GND power_in Ground (0 V) supply reference.
7 RES input Reset pin; must be connected to GND for normal device operation.
8 GND power_in Ground (0 V) supply reference; provides return path for analog and digital circuits.
9 VDD power_in Analog power supply; operating range 1.62 V to 3.6 V, factory calibrated at 1.8 V typical.
10 VDD_IO power_in Digital I/O buffer power supply; range 1.62 V to (VDD + 0.1 V); independent from VDD to support voltage level translation.
11 INT2 bidirectional Interrupt output pin 2 with push-pull driver; can be configured as clock input trigger in single data conversion on-demand mode.
12 INT1 output Interrupt output pin 1 with push-pull driver; signals motion detection, data-ready, tap, free-fall, and wake-up events.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LGA-12(2x2)
Category Sensors
Pins 12

CAD (KiCad official)

  • Symbol: LIS2DTW12TR
  • Footprint: Package_LGA:LGA-12_2x2mm_P0.5mm
  • 3D model: LGA-12(2x2) (KiCad packages3D, STEP)
  • 3D model files: lis2dtw12tr-etched.step / lis2dtw12tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lis2dtw12tr.step / lis2dtw12tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (65 pp, sha256 9446b856ef087ecb, retrieved 2026-09-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF