← Commit history

Initial commit: component/lis2dtw12tr

Ray ·62b906571a ·
2 files changed +213
README.mdadded+48
@@ -0,0 +1,48 @@+# LIS2DTW12TR++**STMicroelectronics** · Accelerometers · LGA-12(2x2)++LIS2DTW12TR from STMicroelectronics, in a LGA-12(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SCL/SPC | bidirectional | I²C serial clock (open-drain) or SPI port clock input; enables clock stretching in I²C mode. |+| 2 | CS | input | SPI chip select; pulled low enables SPI mode, held high to VDD_IO enables I²C mode. |+| 3 | SDO/SA0 | output | SPI serial data output with internal pull-up to VDD; or I²C slave address selection bit (SA0) in I²C mode. |+| 4 | SDA/SDI/SDO | bidirectional | I²C serial data line (open-drain), SPI input data (4-wire mode), or SPI output data (3-wire mode) depending on interface configuration. |+| 5 | NC | unconnected | Internally not connected; may be tied to VDD, VDD_IO, or GND without functional impact. |+| 6 | GND | power_in | Ground (0 V) supply reference. |+| 7 | RES | input | Reset pin; must be connected to GND for normal device operation. |+| 8 | GND | power_in | Ground (0 V) supply reference; provides return path for analog and digital circuits. |+| 9 | VDD | power_in | Analog power supply; operating range 1.62 V to 3.6 V, factory calibrated at 1.8 V typical. |+| 10 | VDD_IO | power_in | Digital I/O buffer power supply; range 1.62 V to (VDD + 0.1 V); independent from VDD to support voltage level translation. |+| 11 | INT2 | bidirectional | Interrupt output pin 2 with push-pull driver; can be configured as clock input trigger in single data conversion on-demand mode. |+| 12 | INT1 | output | Interrupt output pin 1 with push-pull driver; signals motion detection, data-ready, tap, free-fall, and wake-up events. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LGA-12(2x2) |+| Category | Sensors |+| Pins | 12 |++## CAD (KiCad official)++- Symbol: `LIS2DTW12TR`+- Footprint: `Package_LGA:LGA-12_2x2mm_P0.5mm`+- 3D model: LGA-12(2x2) (KiCad packages3D, STEP)+- 3D model files: `lis2dtw12tr-etched.step` / `lis2dtw12tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lis2dtw12tr.step` / `lis2dtw12tr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588931120050552832) (65 pp, sha256 `9446b856ef087ecb`, retrieved 2026-09-18, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lis2dtw12tr-datasheet.pdf)
page.jsonadded+165
@@ -0,0 +1,165 @@+{+  "slug": "lis2dtw12tr",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Accelerometers, LGA-12(2x2). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "sensors",+    "lis2dtw12tr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lis2dtw12tr.kicad_sym",+    "lis2dtw12tr.kicad_mod",+    "lis2dtw12tr.glb",+    "lis2dtw12tr.step",+    "lis2dtw12tr.lbr",+    "docs/hero.png",+    "docs/lis2dtw12tr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LIS2DTW12TR",+    "manufacturer": "STMicroelectronics",+    "package": "LGA-12(2x2)",+    "pin_count": 12,+    "category": "Sensors",+    "subcategory": "Accelerometers",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588931120050552832",+    "parts": {+      "symbol": "lis2dtw12tr.kicad_sym",+      "footprint": "lis2dtw12tr.kicad_mod",+      "model_3d": "lis2dtw12tr-etched.glb",+      "model_3d_plain": "lis2dtw12tr.glb",+      "model_3d_step": "lis2dtw12tr-etched.step",+      "model_3d_step_plain": "lis2dtw12tr.step",+      "lbr": "lis2dtw12tr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2655085"+    },+    "pins": [+      {+        "number": "1",+        "name": "SCL/SPC",+        "type": "bidirectional",+        "description": "I²C serial clock (open-drain) or SPI port clock input; enables clock stretching in I²C mode."+      },+      {+        "number": "2",+        "name": "CS",+        "type": "input",+        "description": "SPI chip select; pulled low enables SPI mode, held high to VDD_IO enables I²C mode."+      },+      {+        "number": "3",+        "name": "SDO/SA0",+        "type": "output",+        "description": "SPI serial data output with internal pull-up to VDD; or I²C slave address selection bit (SA0) in I²C mode."+      },+      {+        "number": "4",+        "name": "SDA/SDI/SDO",+        "type": "bidirectional",+        "description": "I²C serial data line (open-drain), SPI input data (4-wire mode), or SPI output data (3-wire mode) depending on interface configuration."+      },+      {+        "number": "5",+        "name": "NC",+        "type": "unconnected",+        "description": "Internally not connected; may be tied to VDD, VDD_IO, or GND without functional impact."+      },+      {+        "number": "6",+        "name": "GND",+        "type": "power_in",+        "description": "Ground (0 V) supply reference."+      },+      {+        "number": "7",+        "name": "RES",+        "type": "input",+        "description": "Reset pin; must be connected to GND for normal device operation."+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "Ground (0 V) supply reference; provides return path for analog and digital circuits."+      },+      {+        "number": "9",+        "name": "VDD",+        "type": "power_in",+        "description": "Analog power supply; operating range 1.62 V to 3.6 V, factory calibrated at 1.8 V typical."+      },+      {+        "number": "10",+        "name": "VDD_IO",+        "type": "power_in",+        "description": "Digital I/O buffer power supply; range 1.62 V to (VDD + 0.1 V); independent from VDD to support voltage level translation."+      },+      {+        "number": "11",+        "name": "INT2",+        "type": "bidirectional",+        "description": "Interrupt output pin 2 with push-pull driver; can be configured as clock input trigger in single data conversion on-demand mode."+      },+      {+        "number": "12",+        "name": "INT1",+        "type": "output",+        "description": "Interrupt output pin 1 with push-pull driver; signals motion detection, data-ready, tap, free-fall, and wake-up events."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 65,+        "cost_usd": 0.3723,+        "at": "2026-09-18T01:08:23"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588931120050552832",+        "pages": 65,+        "sha256": "9446b856ef087ecb",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 12,+        "described": 12,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file