main
Ray lis2de12tr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 28e90e0
{
  "slug": "lis2de12tr",
  "version": "0.1.0",
  "type": "component",
  "description": "STMicroelectronics Accelerometers, LGA-12(2x2). Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "sensors",
    "lis2de12tr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lis2de12tr.kicad_sym",
    "lis2de12tr.kicad_mod",
    "lis2de12tr.glb",
    "lis2de12tr.step",
    "lis2de12tr.lbr",
    "docs/hero.png",
    "docs/lis2de12tr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "LIS2DE12TR",
    "manufacturer": "STMicroelectronics",
    "package": "LGA-12(2x2)",
    "pin_count": 12,
    "category": "Sensors",
    "subcategory": "Accelerometers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588900481972649984",
    "parts": {
      "symbol": "lis2de12tr.kicad_sym",
      "footprint": "lis2de12tr.kicad_mod",
      "model_3d": "lis2de12tr-etched.glb",
      "model_3d_plain": "lis2de12tr.glb",
      "model_3d_step": "lis2de12tr-etched.step",
      "model_3d_step_plain": "lis2de12tr.step",
      "lbr": "lis2de12tr.lbr"
    },
    "distributor_links": {
      "lcsc": "C155639"
    },
    "pins": [
      {
        "number": "1",
        "name": "SCL/SPC",
        "type": "input",
        "description": "I2C serial clock (SCL) input in I2C mode or SPI serial port clock (SPC) input in SPI mode."
      },
      {
        "number": "2",
        "name": "CS",
        "type": "input",
        "description": "SPI chip select enable and I2C/SPI mode selection input (high for I2C enabled, low for SPI enabled)."
      },
      {
        "number": "3",
        "name": "SDO/SA0",
        "type": "bidirectional",
        "description": "SPI serial data output (SDO) or I2C slave address least significant bit (SA0) with internal pull-up of 20.4 to 54.4 kΩ depending on Vdd_IO supply voltage."
      },
      {
        "number": "4",
        "name": "SDA/SDI/SDO",
        "type": "bidirectional",
        "description": "I2C serial data (SDA) bidirectional, SPI serial data input (SDI), or 3-wire SPI serial data output (SDO) depending on interface mode configuration."
      },
      {
        "number": "5",
        "name": "Res",
        "type": "passive",
        "description": "Reserved pin that must be connected to ground (GND)."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference (0 V) connection."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference (0 V) connection."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference (0 V) connection."
      },
      {
        "number": "9",
        "name": "Vdd",
        "type": "power_in",
        "description": "Analog and core power supply with 1.71 V to 3.6 V operating range, requires 100 nF ceramic and 10 μF aluminum decoupling capacitors placed near this pin."
      },
      {
        "number": "10",
        "name": "Vdd_IO",
        "type": "power_in",
        "description": "I/O power supply with 1.71 V to Vdd+0.1 V operating range that can be maintained independently of Vdd without blocking communication buses."
      },
      {
        "number": "11",
        "name": "INT2",
        "type": "output",
        "description": "Programmable interrupt output pin 2 for motion detection and free-fall events, active high by default (polarity configurable via CTRL_REG6 bit 7)."
      },
      {
        "number": "12",
        "name": "INT1",
        "type": "output",
        "description": "Programmable interrupt output pin 1 for motion detection and free-fall events, active high by default (polarity configurable via CTRL_REG3 bit 7)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 3 (SDO/SA0) operates in dual mode: SPI serial data output when CS is low, or I2C slave address c; Pin 4 (SDA/SDI/SDO) supports three operational modes: I2C bidirectional mode when CS is high, SPI 4-"
        ],
        "pages_sent": 51,
        "cost_usd": 0.4164,
        "at": "2026-09-18T07:27:21"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588900481972649984",
        "pages": 51,
        "sha256": "f92fb27b58bec57d",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 12,
        "described": 12,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lis2de12tr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          2.0,
          1.025
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5e6c16287491528f89c09590e0d5dace14debf478226f74b45504eb906119145",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lis2de12tr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          2.0,
          1.025
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "0ba6c1dec79f09b3eb51ce25a76fbf378dce3d0c4eb9fa0052b1fed84eeeb84e",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}