component
LHR3030AFAA
Public Made by Adomby adom
Legendsemi Voltage Reference, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLHR3030AFAA
Legendsemi · Voltage Reference · SOP-8
LHR3030AFAA from Legendsemi, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | Do not connect; leave this pin unconnected. |
| 2 | VIN | power_in | Supply voltage input, VOUT + 0.2V to 18V (minimum 2.7V for VOUT ≤ 2.5V), with a 1µF to 10µF bypass capacitor recommended. |
| 3 | TEMP | output | Temperature monitor pin giving a temperature-dependent voltage of 668mV at 25°C with 1.91mV/°C sensitivity, high output impedance, with no effect on VOUT accuracy. |
| 4 | GND | power_in | Ground. |
| 5 | NC | unconnected | No internal connection; do not connect. |
| 6 | VOUT | output | Reference voltage output (3.0V for LHR3030), sources and sinks ±10mA, requires a 1µF to 50µF output capacitor to GND. |
| 7 | DNC | unconnected | Do not connect; leave this pin unconnected. |
| 8 | DNC | unconnected | Do not connect; leave this pin unconnected. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Legendsemi |
| Package | SOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VOUT | 3 | V | 2.7V<VIN<18V, LHR3030 | 5 | ||
| Initial accuracy, high grade | -0.05 | 0.05 | % | All voltage options, TA = 25°C | 5 | ||
| Output voltage temperature drift, high grade | δVOUT/dT | 1 | 3 | ppm/°C | High grade | 5 | |
| Line regulation | δVO(δVI) | 0.1 | 1 | ppm/V | VIN = (VOUT + 0.2) to 18V | 5 | |
| Line regulation over temperature | δVO(δVI) | 0.2 | 1 | ppm/V | VIN = VOUT + 0.2V, TA = -40°C to 125°C | 5 | |
| Load regulation | δVO(δIL) | 20 | 30 | ppm/mA | -10mA < ILOAD < 10mA, VIN = VOUT + 0.75V | 5 | |
| Load regulation over temperature | δVO(δIL) | 50 | ppm/mA | -10mA < ILOAD < 10mA, VIN = VOUT + 0.75V, TA = -40°C to 125°C | 6 | ||
| Supply voltage | Vs | 18 | V | Min is VOUT + 0.2 (printed as expression) | 6 | ||
| Quiescent current | 0.8 | 1 | mA | 6 | |||
| Quiescent current over temperature | 1.2 | mA | TA = -40°C to 125°C | 6 | |||
| Specified temperature range | -40 | 125 | °C | 6 | |||
| Operating temperature range | -55 | 125 | °C | 6 | |||
| Output voltage noise | 1.5 | µVPP/V | F=0.1Hz to 10Hz | 5 | |||
| Short-circuit current | ISC | 25 | mA | VOUT = 0 | 6 | ||
| Thermal hysteresis, high grade SOP-8, cycle 1 | 70 | ppm | 高等级 SOP-8 周期 1 | 6 | |||
| Thermal hysteresis, high grade SOP-8, cycle 2 | 50 | ppm | 高等级 SOP-8 周期 2 | 6 | |||
| Long-term stability SOP-8, 0 to 1000 h | 100 | ppm/1000 h | SOP-8 0 到 1000 小时 | 6 | |||
| Long-term stability SOP-8, 1000 to 2000 h | 50 | ppm/1000 h | SOP-8 1000 到 2000 小时 | 6 | |||
| TEMP pin output voltage | 668 | mV | TA=25°C | 6 | |||
| TEMP pin temperature sensitivity | 1.91 | mV/°C | TA = -40°C to 125°C | 6 | |||
| Input voltage (abs max) | -0.2 | 18 | V | 4 | |||
| Output short to ground (abs max) | 0 | 30 | mA | 4 | |||
| Output voltage range (abs max) | -0.2 | 5.5 | V | 4 | |||
| Operating temperature (abs max) | -55 | 125 | °C | 4 | |||
| Junction temperature (abs max) | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| ESD HBM | V(ESD) | -3000 | 3000 | V | ANSI/ESDA/JEDEC JS-001 | 5 | |
| ESD CDM | V(ESD) | -1000 | 1000 | V | JESD22-C101 | 5 | |
| Input voltage (recommended) | VIN | 18 | V | Min is VOUT + 0.2V | 5 | ||
| Output current (recommended) | IOUT | -10 | 10 | mA | 5 | ||
| Junction-to-ambient thermal resistance, SOP | RθJA | 160.9 | °C/W | 8-pin SOP column | 5 | ||
| Junction-to-case (top) thermal resistance, SOP | RθJC(top) | 53.9 | °C/W | 8-pin SOP column | 5 | ||
| Junction-to-board thermal resistance, SOP | RθJB | 82.3 | °C/W | 8-pin SOP column | 5 | ||
| Junction-to-top characterization parameter, SOP | ψJT | 5.1 | °C/W | 8-pin SOP column | 5 | ||
| Junction-to-board characterization parameter, SOP | ψJB | 80.7 | °C/W | 8-pin SOP column | 5 |
CAD (KiCad official)
- Symbol:
LHR3030AFAA - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
lhr3030afaa-etched.step/lhr3030afaa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lhr3030afaa.step/lhr3030afaa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Legendsemi datasheet (14 pp, sha256
a5ef983cd4f79fdb, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).