component
LHR3025BFMA
Public Made by Adomby adom
Legendsemi(领慧立芯) Voltage Reference, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 7d ago |
| viewers | 7d ago |
| lhr3025bfma-etched.glb | 7d ago |
| lhr3025bfma-etched.step | 7d ago |
| lhr3025bfma-hero.glb | 7d ago |
| lhr3025bfma-hero.overlay.json | 7d ago |
| lhr3025bfma.glb | 7d ago |
| lhr3025bfma.kicad_mod | 7d ago |
| lhr3025bfma.kicad_sym | 7d ago |
| lhr3025bfma.lbr | 7d ago |
| lhr3025bfma.step | 7d ago |
| package.json | 7d ago |
| page.json | 7d ago |
| README.md | 7d ago |
LHR3025BFMA
Legendsemi(领慧立芯) · Voltage Reference · MSOP-8
LHR3025BFMA from Legendsemi(领慧立芯), in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | Do not connect; leave this pin unconnected. |
| 2 | VIN | power_in | Supply voltage input; the recommended VIN range is VOUT + 0.2V to 18V, the absolute maximum input voltage is 18V, and the minimum supply is 2.7V for LHR3025 (VOUT ≤ 2.5V). |
| 3 | TEMP | output | Temperature monitor output providing a temperature-dependent voltage (about 640 mV + 2.08 mV/°C × T, ±15 °C accuracy), with high output impedance so low-impedance loads should be avoided or buffered. |
| 4 | GND | power_in | Ground reference pin; the output capacitor CL (1 µF to 50 µF) must be connected from VOUT to GND. |
| 5 | NC | unconnected | No internal connection; this pin can be left unconnected. |
| 6 | VOUT | output | Voltage reference output that sources and sinks up to ±10 mA load current, requires a 1 µF to 50 µF output capacitor to GND, and has an absolute short-circuit limit of 70 mA to ground per the absolute maximum ratings. |
| 7 | DNC | unconnected | Do not connect; leave this pin unconnected. |
| 8 | DNC | unconnected | Do not connect; leave this pin unconnected. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Legendsemi(领慧立芯) |
| Package | MSOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Initial accuracy, standard grade | -0.1 | 0.1 | % | 所有电压选项（1） | 5 | ||
| Output voltage temperature drift, standard grade | δVOUT/dT | 3 | 8 | ppm/°C | 5 | ||
| Line regulation | δVO(δVI) | 0.7 | 1 | ppm/V | VIN = (VOUT + 0.2) 至 18V（2） | 5 | |
| Load regulation | δVO(δIL) | 20 | 30 | ppm/mA | -10mA < ILOAD < 10mA，VIN = VOUT + 0.75V（3） | 5 | |
| Quiescent current | 0.8 | 1 | mA | 6 | |||
| Supply voltage Vs (maximum) | Vs | 18 | V | 请参阅注释 | 6 | ||
| Specified temperature range | -40 | 125 | °C | 6 | |||
| Input voltage VIN (maximum) | VIN | 18 | V | 5 | |||
| Output current IOUT | IOUT | -10 | 10 | mA | 5 | ||
| Input voltage | -0.2 | 18 | V | 4 | |||
| Output short-to-ground current | 0 | 70 | mA | 输出对地短路 | 4 | ||
| Operating temperature | -55 | 125 | °C | 4 | |||
| Junction temperature TJ | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| ESD HBM | -3000 | 3000 | V | HBM，ANSI/ESDA/JEDEC JS-001 | 4 | ||
| ESD CDM | -1000 | 1000 | V | CDM，JEDEC JESD22-C101 | 4 | ||
| Junction-to-ambient thermal resistance (MSOP-8) | RθJA | 115 | °C/W | MSOP 8-pin | 5 | ||
| Junction-to-case (top) thermal resistance (MSOP-8) | RθJC(top) | 63.4 | °C/W | MSOP 8-pin | 5 | ||
| Junction-to-board thermal resistance (MSOP-8) | RθJB | 57.1 | °C/W | MSOP 8-pin | 5 | ||
| Junction-to-top characterization parameter (MSOP-8) | ψJT | 15.4 | °C/W | MSOP 8-pin | 5 | ||
| Junction-to-board characterization parameter (MSOP-8) | ψJB | 56.2 | °C/W | MSOP 8-pin | 5 |
CAD (KiCad official)
- Symbol:
LHR3025BFMA - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
lhr3025bfma-etched.step/lhr3025bfma-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lhr3025bfma.step/lhr3025bfma.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Legendsemi(领慧立芯) datasheet (14 pp, sha256
ff3d9553c635cfa9, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).