component
LGS63042EP
Public Made by Adomby adom
Legend Si LED Drivers, ESOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+8−5@@ -44,7 +44,7 @@ "number": "3", "name": "SW", "type": "power_out",- "description": "Internal power switch node (drain of the integrated 350m\u03a9 low-side MOSFET). Externally connected to the power inductor and Schottky diode. Absolute max SW-to-GND voltage is 60V; max switch current 3A."+ "description": "Internal power switch node (drain of the integrated 350mΩ low-side MOSFET). Externally connected to the power inductor and Schottky diode. Absolute max SW-to-GND voltage is 60V; max switch current 3A." }, { "number": "4",@@ -62,19 +62,19 @@ "number": "6", "name": "CSN", "type": "input",- "description": "LED current detection pin. Connect to external LED current sampling resistor Rsence. Output current is set by IOUT = (VOUT(VIN) \u2212 VCSN) / Rsence, with typical (VOUT \u2212 VCSN) = 0.2V. Absolute max voltage: VIN\u22126V to VIN+0.3V."+ "description": "LED current detection pin. Connect to external LED current sampling resistor Rsence. Output current is set by IOUT = (VOUT(VIN) − VCSN) / Rsence, with typical (VOUT − VCSN) = 0.2V. Absolute max voltage: VIN−6V to VIN+0.3V." }, { "number": "7", "name": "OVP", "type": "input",- "description": "Overvoltage protection pin. Connect to the output through a resistor divider (R1 to VOUT, R2 to GND). OVP trip is typically 1.0V (recovery 0.9V); trip output voltage set by VOUT_OVP = (1 + R1/R2) \u00d7 1.0V. Absolute max OVP-to-GND voltage: 6V."+ "description": "Overvoltage protection pin. Connect to the output through a resistor divider (R1 to VOUT, R2 to GND). OVP trip is typically 1.0V (recovery 0.9V); trip output voltage set by VOUT_OVP = (1 + R1/R2) × 1.0V. Absolute max OVP-to-GND voltage: 6V." }, { "number": "8", "name": "EN", "type": "input",- "description": "Enable / dimming input. For LGS63042 (PWM variant) drive with a digital PWM signal at 100Hz-100kHz; duty cycle sets the average LED current per IOUT = (0.2 \u00d7 D) / Rsence. Rising threshold 0.5V (typ), falling 0.35V (typ), 800k\u03a9 internal pull-down. Absolute max EN-to-GND: 6V. Do not leave floating."+ "description": "Enable / dimming input. For LGS63042 (PWM variant) drive with a digital PWM signal at 100Hz-100kHz; duty cycle sets the average LED current per IOUT = (0.2 × D) / Rsence. Rising threshold 0.5V (typ), falling 0.35V (typ), 800kΩ internal pull-down. Absolute max EN-to-GND: 6V. Do not leave floating." } ], "provenance": {@@ -138,5 +138,8 @@ "docs/lgs63042ep-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }