main
Ray
Publish 0.1.0
7d251ba
LF411CP
Texas Instruments · FET Input Amplifiers · PDIP-8
LF411CP from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection; the datasheet specifies do not connect this pin. |
| 2 | IN- | input | Inverting (negative) input; the absolute maximum input voltage is ±15 V. |
| 3 | IN+ | input | Non-inverting (positive) input; the absolute maximum input voltage is ±15 V. |
| 4 | VCC- | power_in | Negative power supply; the recommended supply range is -3.5 V to -18 V. |
| 5 | NC | unconnected | No internal connection; the datasheet specifies do not connect this pin. |
| 6 | OUT | output | Amplifier output; the maximum peak output swing at RL = 10 kΩ is ±12 V minimum and ±14.95 V typical. |
| 7 | VCC+ | power_in | Positive power supply; the recommended supply range is 3.5 V to 18 V. |
| 8 | NC | unconnected | No internal connection; the datasheet specifies do not connect this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | 0.8 | 2 | mV | VIC = VCM, RS = 10kΩ, TA = 25°C | 3 | |
| Average temperature coefficient of input offset voltage | αVIO | 10 | 20 | µV/°C | VIC = 0V, RS = 10kΩ | 3 | |
| Input offset current, 25°C | IIO | 25 | 100 | pA | VIC = 0V, TA = 25°C | 3 | |
| Input offset current, 70°C | IIO | 2 | nA | VIC = 0V, TA = 70°C | 3 | ||
| Input bias current, 25°C | IIB | 50 | 200 | pA | VIC = 0V, TA = 25°C | 3 | |
| Input bias current, 70°C | IIB | 4 | nA | VIC = 0V, TA = 70°C | 3 | ||
| Common-mode input voltage range | VICR | -11.5 | 14.5 | V | 3 | ||
| Maximum peak output-voltage swing | VOM | 12 | 14.95 | V | RL = 10kΩ | 3 | |
| Large-signal differential voltage, 25°C | AVD | 25 | 200 | V/mV | VOUT = ±10V, RL = 2kΩ, TA = 25°C | 3 | |
| Large-signal differential voltage, 0°C to 70°C | AVD | 15 | 200 | V/mV | VOUT = ±10V, RL = 2kΩ, TA = 0°C to 70°C | 3 | |
| Input resistance | ri | 1012 | Ω | TJ = 25°C | 3 | ||
| Common-mode rejection ratio | CMRR | 70 | 100 | dB | RS ≤ 10kΩ | 3 | |
| Supply-voltage rejection ratio | kSVR | 70 | 100 | dB | 3 | ||
| Supply current | ICC | 0.56 | 3.4 | mA | 3 | ||
| Slew rate | SR | 0.5 | V/µs | TA = 25°C | 3 | ||
| Unity-gain bandwidth | B1 | 4.5 | MHz | TA = 25°C | 4 | ||
| Equivalent input noise voltage | Vn | 10.8 | nV/√Hz | f = 1kHz, RS = 20Ω, TA = 25°C | 4 | ||
| Equivalent input noise current | In | 2 | fA/√Hz | f = 1kHz, TA = 25°C | 4 | ||
| Supply voltage, positive | VCC+ | 18 | V | 3 | |||
| Supply voltage, negative | VCC- | -18 | V | 3 | |||
| Differential input voltage | VID | -30 | 30 | V | 3 | ||
| Input voltage | VI | -15 | 15 | V | 3 | ||
| Continuous total power dissipation | 500 | mW | 3 | ||||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| Package thermal impedance, P package | θJA | 104 | °C/W | P package, JESD 51 | 3 | ||
| Supply voltage, positive (C suffix) | VCC+ | 3.5 | 18 | V | C suffix | 3 | |
| Supply voltage, negative (C suffix) | VCC- | -18 | -3.5 | V | C suffix | 3 | |
| Operating free-air temperature (C suffix) | TA | 0 | 70 | °C | C suffix | 3 |
CAD (KiCad official)
- Symbol:
LF411CP - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
lf411cp-etched.step/lf411cp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lf411cp.step/lf411cp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (16 pp, sha256
a0240b42c30a83c2, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LF411CP
**Texas Instruments** · FET Input Amplifiers · PDIP-8
LF411CP from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection; the datasheet specifies do not connect this pin. |
| 2 | IN- | input | Inverting (negative) input; the absolute maximum input voltage is ±15 V. |
| 3 | IN+ | input | Non-inverting (positive) input; the absolute maximum input voltage is ±15 V. |
| 4 | VCC- | power_in | Negative power supply; the recommended supply range is -3.5 V to -18 V. |
| 5 | NC | unconnected | No internal connection; the datasheet specifies do not connect this pin. |
| 6 | OUT | output | Amplifier output; the maximum peak output swing at RL = 10 kΩ is ±12 V minimum and ±14.95 V typical. |
| 7 | VCC+ | power_in | Positive power supply; the recommended supply range is 3.5 V to 18 V. |
| 8 | NC | unconnected | No internal connection; the datasheet specifies do not connect this pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | | 0.8 | 2 | mV | VIC = VCM, RS = 10kΩ, TA = 25°C | 3 |
| Average temperature coefficient of input offset voltage | αVIO | | 10 | 20 | µV/°C | VIC = 0V, RS = 10kΩ | 3 |
| Input offset current, 25°C | IIO | | 25 | 100 | pA | VIC = 0V, TA = 25°C | 3 |
| Input offset current, 70°C | IIO | | | 2 | nA | VIC = 0V, TA = 70°C | 3 |
| Input bias current, 25°C | IIB | | 50 | 200 | pA | VIC = 0V, TA = 25°C | 3 |
| Input bias current, 70°C | IIB | | | 4 | nA | VIC = 0V, TA = 70°C | 3 |
| Common-mode input voltage range | VICR | -11.5 | | 14.5 | V | | 3 |
| Maximum peak output-voltage swing | VOM | 12 | 14.95 | | V | RL = 10kΩ | 3 |
| Large-signal differential voltage, 25°C | AVD | 25 | 200 | | V/mV | VOUT = ±10V, RL = 2kΩ, TA = 25°C | 3 |
| Large-signal differential voltage, 0°C to 70°C | AVD | 15 | 200 | | V/mV | VOUT = ±10V, RL = 2kΩ, TA = 0°C to 70°C | 3 |
| Input resistance | ri | | 1012 | | Ω | TJ = 25°C | 3 |
| Common-mode rejection ratio | CMRR | 70 | 100 | | dB | RS ≤ 10kΩ | 3 |
| Supply-voltage rejection ratio | kSVR | 70 | 100 | | dB | | 3 |
| Supply current | ICC | | 0.56 | 3.4 | mA | | 3 |
| Slew rate | SR | | 0.5 | | V/µs | TA = 25°C | 3 |
| Unity-gain bandwidth | B1 | | 4.5 | | MHz | TA = 25°C | 4 |
| Equivalent input noise voltage | Vn | | 10.8 | | nV/√Hz | f = 1kHz, RS = 20Ω, TA = 25°C | 4 |
| Equivalent input noise current | In | | 2 | | fA/√Hz | f = 1kHz, TA = 25°C | 4 |
| Supply voltage, positive | VCC+ | | | 18 | V | | 3 |
| Supply voltage, negative | VCC- | -18 | | | V | | 3 |
| Differential input voltage | VID | -30 | | 30 | V | | 3 |
| Input voltage | VI | -15 | | 15 | V | | 3 |
| Continuous total power dissipation | | | | 500 | mW | | 3 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 3 |
| Package thermal impedance, P package | θJA | | 104 | | °C/W | P package, JESD 51 | 3 |
| Supply voltage, positive (C suffix) | VCC+ | 3.5 | | 18 | V | C suffix | 3 |
| Supply voltage, negative (C suffix) | VCC- | -18 | | -3.5 | V | C suffix | 3 |
| Operating free-air temperature (C suffix) | TA | 0 | | 70 | °C | C suffix | 3 |
## CAD (KiCad official)
- Symbol: `LF411CP`
- Footprint: `Package_DIP:DIP-8_W7.62mm`
- 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files: `lf411cp-etched.step` / `lf411cp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lf411cp.step` / `lf411cp.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lf411.pdf) (16 pp, sha256 `a0240b42c30a83c2`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lf411cp-datasheet.pdf)