main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lf353n: viewers rendered from the public page · Ray
lf353n-etched.glb Publish 0.1.0 · Ray
lf353n-etched.step lf353n: factory component page (tier=mfr) · Ray
lf353n-hero.glb lf353n: hero GLB from the etched model (keeps the MPN mark) · Ray
lf353n-hero.overlay.json Publish 0.1.0 · Ray
lf353n.glb Publish 0.1.0 · Ray
lf353n.kicad_mod Publish 0.1.0 · Ray
lf353n.kicad_sym Publish 0.1.0 · Ray
lf353n.lbr Publish 0.1.0 · Ray
lf353n.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

LF353N

Texas Instruments · FET Input Amplifiers · PDIP-8

LF353N from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTPUT A output Output of amplifier A, which drives a 2 kΩ load to ±10V over 0°C to +70°C.
2 INVERTING INPUT A input Inverting input of amplifier A; differential input voltage up to ±30V and input voltage range ±15V, and it must not exceed the negative supply.
3 NON-INVERTING INPUT A input Non-inverting input of amplifier A; differential input voltage up to ±30V and input voltage range ±15V, and it must not exceed the negative supply.
4 V- power_in Negative supply pin; total supply voltage is rated ±18V maximum, and the inputs must not go below it.
5 NON-INVERTING INPUT B input Non-inverting input of amplifier B; differential input voltage up to ±30V and input voltage range ±15V, and it must not exceed the negative supply.
6 INVERTING INPUT B input Inverting input of amplifier B; differential input voltage up to ±30V and input voltage range ±15V, and it must not exceed the negative supply.
7 OUTPUT B output Output of amplifier B, which drives a 2 kΩ load to ±10V over 0°C to +70°C.
8 V+ power_in Positive supply pin; total supply voltage is rated ±18V maximum, with normal operation on supplies down to ±6V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package PDIP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VOS 5 10 mV RS=10kΩ, TA=25°C 4
Input Offset Voltage over temperature VOS 13 mV Over Temperature 4
Input Offset Current IOS 25 100 pA Tj=25°C 4
Input Offset Current IOS 4 nA Tj≤70°C 4
Input Bias Current IB 50 200 pA Tj=25°C 4
Input Bias Current IB 8 nA Tj≤70°C 4
Large Signal Voltage Gain AVOL 25 100 V/mV VS=±15V, TA=25°C; VO=±10V, RL=2 kΩ 4
Large Signal Voltage Gain over temperature AVOL 15 V/mV Over Temperature 4
Output Voltage Swing VO 12 13.5 V VS=±15V, RL=10kΩ 4
Input Common-Mode Voltage Range VCM -12 11 15 V VS=±15V 4
Common-Mode Rejection Ratio CMRR 70 100 dB RS≤ 10kΩ 4
Supply Voltage Rejection Ratio PSRR 70 100 dB See note (3): VS = ±6V to ±15V 4
Supply Current IS 3.6 6.5 mA 4
Slew Rate SR 8 13 V/μs VS=±15V, TA=25°C 4
Gain Bandwidth Product GBW 2.7 4 MHz VS=±15V, TA=25°C 4
Total Harmonic Distortion THD 0.02 % AV=+10, RL=10k, VO=20Vp−p, BW=20 Hz-20 kHz 4
Supply Voltage -18 18 V 3
Differential Input Voltage -30 30 V 3
Input Voltage Range -15 15 V Absolute maximum negative input voltage equals negative supply (note 4) 3
Operating Temperature Range 0 70 °C Printed in the Absolute Maximum Ratings table 3
Maximum Junction Temperature Tj(MAX) 150 °C 3
Storage Temperature Range -65 150 °C 3
Lead Temperature (Soldering) 260 °C 10 sec 3
Dual-In-Line Package Soldering 260 °C Dual-In-Line Package Soldering (10 sec.) 3
ESD Tolerance 1000 V Human body model, 1.5 kΩ in series with 100 pF 3
Thermal resistance junction to ambient, P package θJA 115 °C/W P package, junction to ambient 3

CAD (KiCad official)

  • Symbol: LF353N
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: PDIP-8 (KiCad packages3D, STEP)
  • 3D model files: lf353n-etched.step / lf353n-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lf353n.step / lf353n.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (19 pp, sha256 f8e178b5fc61df2d, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF