component
LF347IM
Public Made by Adomby adom
HGSEMI FET Input Amplifiers, SOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 10d ago |
| viewers | 10d ago |
| lf347im-etched.glb | 10d ago |
| lf347im-etched.step | 10d ago |
| lf347im-hero.glb | 10d ago |
| lf347im-hero.overlay.json | 10d ago |
| lf347im.glb | 10d ago |
| lf347im.kicad_mod | 10d ago |
| lf347im.kicad_sym | 10d ago |
| lf347im.lbr | 10d ago |
| lf347im.step | 10d ago |
| package.json | 10d ago |
| page.json | 10d ago |
| README.md | 10d ago |
LF347IM
HGSEMI · FET Input Amplifiers · SOP-14
LF347IM from HGSEMI, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Output of amplifier 1, with output short-circuit current protection. |
| 2 | IN1- | input | Inverting input of amplifier 1. |
| 3 | IN1+ | input | Non-inverting input of amplifier 1. |
| 4 | VCC+ | power_in | Positive power supply; absolute maximum supply voltage is ±18 V. |
| 5 | IN2+ | input | Non-inverting input of amplifier 2. |
| 6 | IN2- | input | Inverting input of amplifier 2. |
| 7 | OUT2 | output | Output of amplifier 2, with output short-circuit current protection. |
| 8 | OUT3 | output | Output of amplifier 3, with output short-circuit current protection. |
| 9 | IN3- | input | Inverting input of amplifier 3. |
| 10 | IN3+ | input | Non-inverting input of amplifier 3. |
| 11 | VCC- | power_in | Negative power supply; absolute maximum supply voltage is ±18 V. |
| 12 | IN4+ | input | Non-inverting input of amplifier 4. |
| 13 | IN4- | input | Inverting input of amplifier 4. |
| 14 | OUT4 | output | Output of amplifier 4, with output short-circuit current protection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOP-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 输入失调电压 Input offset voltage | Vio | 3 | 13 | mV | Rs=5Ω | 3 | |
| 大信号电压增益 Large-signal voltage gain | Avd | 25 | V/mV | RL=2KΩ, Vo=±10V | 3 | ||
| 电源电压抑制比 Supply voltage rejection ratio | SVR | 65 | 75 | dB | Rs=50Ω | 3 | |
| 单路运放静态电流 Supply current per amplifier | Icc | 1.4 | 2.5 | mA | 3 | ||
| 输入共模电压摆幅 Input common-mode voltage range | Vicm | -12 | 15 | V | 3 | ||
| 输入共模电压摆幅 Input common-mode voltage swing (±11 value) | Vicm | -11 | 11 | V | 3 | ||
| 共模抑制比 Common-mode rejection ratio | CMR | 65 | 75 | dB | Rs=50Ω | 3 | |
| 输出短路电流 Output short-circuit current | Ios | 10 | 50 | 60 | mA | 3 | |
| 输出电压摆幅 Output voltage swing (RL=2KΩ) | ±Vopp | 10 | 12 | V | RL=2KΩ | 3 | |
| 输出电压摆幅 Output voltage swing (RL=10KΩ) | ±Vopp | 12 | 13.5 | V | RL=10KΩ | 3 | |
| 转换速率 Slew rate | SR | 8 | 16 | V/us | Vin=10V, RL=2KΩ, CL=100pF | 3 | |
| 增益带宽积 Gain-bandwidth product | GBP | 2.5 | 4 | MHz | f=100kHz, Vin=10mV, RL=2KΩ, CL=100pF | 3 | |
| 电源电压 Supply voltage | Vcc | -18 | 18 | V | Tamb=25℃ unless otherwise specified | 3 | |
| 输入电压 Input voltage | Vi | -15 | 15 | V | Tamb=25℃ unless otherwise specified | 3 | |
| 差模输入电压 Differential input voltage | Vid | -30 | 30 | V | Tamb=25℃ unless otherwise specified | 3 | |
| 功耗 Power dissipation | Ptot | 680 | mW | Tamb=25℃ unless otherwise specified | 3 | ||
| 工作温度 Operating temperature (LF347I) | Toper | -40 | 85 | ℃ | LF347I grade | 3 | |
| 储藏温度 Storage temperature | Tstg | -65 | 150 | ℃ | 3 | ||
| 引脚温度（焊接 10s） Lead temperature (soldering) | TLEAD | 245 | ℃ | 10 s soldering | 3 | ||
| 输入失调电流 Input offset current | Iio | 4 | nA | 3 | |||
| 输入偏置电流 Input bias current | Iib | 20 | nA | 3 | |||
| 延迟时间 Delay time (tr) | tr | 0.1 | us | Vin=200mV, RL=2KΩ, CL=100pF | 3 |
CAD (KiCad official)
- Symbol:
LF347IM - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOP-14 (KiCad packages3D, STEP)
- 3D model files:
lf347im-etched.step/lf347im-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lf347im.step/lf347im.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (8 pp, sha256
f7a6eeb6b6bf8dfd, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).