Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | |
| viewers | |
| lf253dt-etched.fit.json | |
| lf253dt-etched.glb | |
| lf253dt-etched.step | |
| lf253dt.glb | |
| lf253dt.kicad_mod | |
| lf253dt.kicad_sym | |
| lf253dt.lbr | |
| lf253dt.step | |
| package.json | |
| page.json | |
| README.md |
LF253DT
STMicroelectronics · FET InputAmplifiers · SO-8
LF253DT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Output of amplifier 1. Short-circuit protected; typical output swing ±12 V into RL = 2 kΩ at VCC = ±15 V. |
| 2 | IN1- | input | Inverting input of amplifier 1. High-impedance JFET input (Ri ≈ 10^12 Ω); input bias current typ. 20 pA at 25°C. |
| 3 | IN1+ | input | Non-inverting input of amplifier 1. High-impedance JFET input (Ri ≈ 10^12 Ω); common-mode range typ. +15/-12 V at VCC = ±15 V. |
| 4 | VCC- | power_in | Negative supply rail. Operating range VCC = ±3 V to ±18 V (6 to 36 V total supply). Typically tied to -15 V or GND in single-supply designs. |
| 5 | IN2+ | input | Non-inverting input of amplifier 2. High-impedance JFET input (Ri ≈ 10^12 Ω); common-mode range typ. +15/-12 V at VCC = ±15 V. |
| 6 | IN2- | input | Inverting input of amplifier 2. High-impedance JFET input (Ri ≈ 10^12 Ω); input bias current typ. 20 pA at 25°C. |
| 7 | OUT2 | output | Output of amplifier 2. Short-circuit protected; typical output swing ±12 V into RL = 2 kΩ at VCC = ±15 V. |
| 8 | VCC+ | power_in | Positive supply rail. Operating range VCC = ±3 V to ±18 V (6 to 36 V total supply). Typical supply current 1.4 mA (no load). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
LF253DTDLF253DTLF253DTN
CAD (KiCad official)
- Symbol:
LF253DT - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
lf253dt-etched.step/lf253dt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lf253dt.step/lf253dt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (None pp, sha256
ceac07779b59e65c, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).