main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers led7706tr: viewers · Ray
led7706tr-etched.fit.json led7706tr: one-pass backfill (re-etched) · Ray
led7706tr-etched.glb led7706tr: one-pass backfill (re-etched) · Ray
led7706tr-etched.step led7706tr: one-pass backfill (re-etched) · Ray
led7706tr-hero.glb led7706tr: one-pass backfill (re-etched) · Ray
led7706tr-hero.overlay.json led7706tr: one-pass backfill (re-etched) · Ray
led7706tr.glb Publish 0.1.0 · Ray
led7706tr.kicad_mod Publish 0.1.0 · Ray
led7706tr.kicad_sym Publish 0.1.0 · Ray
led7706tr.lbr Publish 0.1.0 · Ray
led7706tr.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Initial commit: component/led7706tr · Ray

LED7706TR

STMicroelectronics · LED Drivers · WQFN-24-EP(4x4)

LED7706TR from STMicroelectronics, in a WQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 COMP output Error amplifier output; connect RC series network to SGND to compensate the boost regulator loop.
2 RILIM input Row current limit programming pin; connect resistor to SGND to set row output current up to 30 mA.
3 BILIM input Boost converter current limit programming pin; connect resistor to SGND to set internal MOSFET current limit.
4 FSW input Switching frequency selection and external sync input; resistor to SGND sets frequency or input for external synchronization.
5 MODE input Current generators fault management selector; detects and manages LED open and short-circuit failures.
6 AVCC power_in Analog supply input +5 V; connect to LDO5 through RC filter.
7 LDO5 power_out LDO output +5 V; power supply for device; bypass to SGND with 1 μF ceramic capacitor.
8 VIN power_in Input voltage supply pin with 4.5 V to 36 V range; connect to main supply rail.
9 SLOPE input Slope compensation setting pin; connect resistor from boost output to this pin to avoid sub-harmonic instability.
10 SGND power_in Signal ground; supply return for analog circuitry and current generators; can connect to thermal pad.
11 ROW1 output Row driver output #1; LED current sink output with up to 30 mA capability.
12 ROW2 output Row driver output #2; LED current sink output with up to 30 mA capability.
13 ROW3 output Row driver output #3; LED current sink output with up to 30 mA capability.
14 ROW4 output Row driver output #4; LED current sink output with up to 30 mA capability.
15 ROW5 output Row driver output #5; LED current sink output with up to 30 mA capability.
16 ROW6 output Row driver output #6; LED current sink output with up to 30 mA capability.
17 PGND power_in Power ground; source of the internal Power MOSFET; handles boost section switching current.
18 OVSEL input Over-voltage selection input; set desired OV threshold using external voltage divider.
19 LX output Switching node; drain of internal Power MOSFET in boost converter.
20 DIM input PWM dimming input; used to externally set LED brightness with PWM signal.
21 EN input Enable input; device turned off when low; soft-start sequence initiated when high or left open.
22 FAULT output Fault signal output; open drain output that goes low when fault condition detected.
23 SYNC output Synchronization output; external synchronization clock output for multi-device applications.
24 SS input Soft-start pin; connect capacitor to SGND to set soft-start duration.
25 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package WQFN-24-EP(4x4)
Category LED Drivers
Pins 25

CAD (KiCad official)

  • Symbol: LED7706TR
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
  • 3D model: WQFN-24-EP(4x4) (KiCad packages3D, STEP)
  • 3D model files: led7706tr-etched.step / led7706tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); led7706tr.step / led7706tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (46 pp, sha256 7a9c0b210e85f573, retrieved 2026-10-03, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF