← Commit history

Initial commit: component/led7706tr

Ray ·65698db266 ·
2 files changed +323
README.mdadded+61
@@ -0,0 +1,61 @@+# LED7706TR++**STMicroelectronics** · LED Drivers · WQFN-24-EP(4x4)++LED7706TR from STMicroelectronics, in a WQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | COMP | output | Error amplifier output; connect RC series network to SGND to compensate the boost regulator loop. |+| 2 | RILIM | input | Row current limit programming pin; connect resistor to SGND to set row output current up to 30 mA. |+| 3 | BILIM | input | Boost converter current limit programming pin; connect resistor to SGND to set internal MOSFET current limit. |+| 4 | FSW | input | Switching frequency selection and external sync input; resistor to SGND sets frequency or input for external synchronization. |+| 5 | MODE | input | Current generators fault management selector; detects and manages LED open and short-circuit failures. |+| 6 | AVCC | power_in | Analog supply input +5 V; connect to LDO5 through RC filter. |+| 7 | LDO5 | power_out | LDO output +5 V; power supply for device; bypass to SGND with 1 μF ceramic capacitor. |+| 8 | VIN | power_in | Input voltage supply pin with 4.5 V to 36 V range; connect to main supply rail. |+| 9 | SLOPE | input | Slope compensation setting pin; connect resistor from boost output to this pin to avoid sub-harmonic instability. |+| 10 | SGND | power_in | Signal ground; supply return for analog circuitry and current generators; can connect to thermal pad. |+| 11 | ROW1 | output | Row driver output #1; LED current sink output with up to 30 mA capability. |+| 12 | ROW2 | output | Row driver output #2; LED current sink output with up to 30 mA capability. |+| 13 | ROW3 | output | Row driver output #3; LED current sink output with up to 30 mA capability. |+| 14 | ROW4 | output | Row driver output #4; LED current sink output with up to 30 mA capability. |+| 15 | ROW5 | output | Row driver output #5; LED current sink output with up to 30 mA capability. |+| 16 | ROW6 | output | Row driver output #6; LED current sink output with up to 30 mA capability. |+| 17 | PGND | power_in | Power ground; source of the internal Power MOSFET; handles boost section switching current. |+| 18 | OVSEL | input | Over-voltage selection input; set desired OV threshold using external voltage divider. |+| 19 | LX | output | Switching node; drain of internal Power MOSFET in boost converter. |+| 20 | DIM | input | PWM dimming input; used to externally set LED brightness with PWM signal. |+| 21 | EN | input | Enable input; device turned off when low; soft-start sequence initiated when high or left open. |+| 22 | FAULT | output | Fault signal output; open drain output that goes low when fault condition detected. |+| 23 | SYNC | output | Synchronization output; external synchronization clock output for multi-device applications. |+| 24 | SS | input | Soft-start pin; connect capacitor to SGND to set soft-start duration. |+| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | WQFN-24-EP(4x4) |+| Category | LED Drivers |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `LED7706TR`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm`+- 3D model: WQFN-24-EP(4x4) (KiCad packages3D, STEP)+- 3D model files: `led7706tr-etched.step` / `led7706tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `led7706tr.step` / `led7706tr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588921792752717824) (46 pp, sha256 `7a9c0b210e85f573`, retrieved 2026-10-03, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/led7706tr-datasheet.pdf)
page.jsonadded+262
@@ -0,0 +1,262 @@+{+  "slug": "led7706tr",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics LED Drivers, WQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "led drivers",+    "led7706tr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "led7706tr.kicad_sym",+    "led7706tr.kicad_mod",+    "led7706tr.glb",+    "led7706tr.step",+    "led7706tr.lbr",+    "docs/hero.png",+    "docs/led7706tr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html",+    "led7706tr-hero.glb",+    "led7706tr-hero.overlay.json"+  ],+  "component": {+    "mpn": "LED7706TR",+    "manufacturer": "STMicroelectronics",+    "package": "WQFN-24-EP(4x4)",+    "pin_count": 25,+    "category": "LED Drivers",+    "subcategory": "LED Drivers",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588921792752717824",+    "parts": {+      "symbol": "led7706tr.kicad_sym",+      "footprint": "led7706tr.kicad_mod",+      "model_3d": "led7706tr-hero.glb",+      "model_3d_plain": "led7706tr.glb",+      "model_3d_step": "led7706tr-etched.step",+      "model_3d_step_plain": "led7706tr.step",+      "lbr": "led7706tr.lbr"+    },+    "distributor_links": {+      "lcsc": 2678750,+      "digikey": "497-6879-2-ND",+      "mouser": "511-LED7706TR"+    },+    "distributor_check": {+      "checked_at": "2026-10-03T08:44:35Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "497-6879-2-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "511-LED7706TR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "COMP",+        "type": "output",+        "description": "Error amplifier output; connect RC series network to SGND to compensate the boost regulator loop."+      },+      {+        "number": "2",+        "name": "RILIM",+        "type": "input",+        "description": "Row current limit programming pin; connect resistor to SGND to set row output current up to 30 mA."+      },+      {+        "number": "3",+        "name": "BILIM",+        "type": "input",+        "description": "Boost converter current limit programming pin; connect resistor to SGND to set internal MOSFET current limit."+      },+      {+        "number": "4",+        "name": "FSW",+        "type": "input",+        "description": "Switching frequency selection and external sync input; resistor to SGND sets frequency or input for external synchronization."+      },+      {+        "number": "5",+        "name": "MODE",+        "type": "input",+        "description": "Current generators fault management selector; detects and manages LED open and short-circuit failures."+      },+      {+        "number": "6",+        "name": "AVCC",+        "type": "power_in",+        "description": "Analog supply input +5 V; connect to LDO5 through RC filter."+      },+      {+        "number": "7",+        "name": "LDO5",+        "type": "power_out",+        "description": "LDO output +5 V; power supply for device; bypass to SGND with 1 μF ceramic capacitor."+      },+      {+        "number": "8",+        "name": "VIN",+        "type": "power_in",+        "description": "Input voltage supply pin with 4.5 V to 36 V range; connect to main supply rail."+      },+      {+        "number": "9",+        "name": "SLOPE",+        "type": "input",+        "description": "Slope compensation setting pin; connect resistor from boost output to this pin to avoid sub-harmonic instability."+      },+      {+        "number": "10",+        "name": "SGND",+        "type": "power_in",+        "description": "Signal ground; supply return for analog circuitry and current generators; can connect to thermal pad."+      },+      {+        "number": "11",+        "name": "ROW1",+        "type": "output",+        "description": "Row driver output #1; LED current sink output with up to 30 mA capability."+      },+      {+        "number": "12",+        "name": "ROW2",+        "type": "output",+        "description": "Row driver output #2; LED current sink output with up to 30 mA capability."+      },+      {+        "number": "13",+        "name": "ROW3",+        "type": "output",+        "description": "Row driver output #3; LED current sink output with up to 30 mA capability."+      },+      {+        "number": "14",+        "name": "ROW4",+        "type": "output",+        "description": "Row driver output #4; LED current sink output with up to 30 mA capability."+      },+      {+        "number": "15",+        "name": "ROW5",+        "type": "output",+        "description": "Row driver output #5; LED current sink output with up to 30 mA capability."+      },+      {+        "number": "16",+        "name": "ROW6",+        "type": "output",+        "description": "Row driver output #6; LED current sink output with up to 30 mA capability."+      },+      {+        "number": "17",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground; source of the internal Power MOSFET; handles boost section switching current."+      },+      {+        "number": "18",+        "name": "OVSEL",+        "type": "input",+        "description": "Over-voltage selection input; set desired OV threshold using external voltage divider."+      },+      {+        "number": "19",+        "name": "LX",+        "type": "output",+        "description": "Switching node; drain of internal Power MOSFET in boost converter."+      },+      {+        "number": "20",+        "name": "DIM",+        "type": "input",+        "description": "PWM dimming input; used to externally set LED brightness with PWM signal."+      },+      {+        "number": "21",+        "name": "EN",+        "type": "input",+        "description": "Enable input; device turned off when low; soft-start sequence initiated when high or left open."+      },+      {+        "number": "22",+        "name": "FAULT",+        "type": "output",+        "description": "Fault signal output; open drain output that goes low when fault condition detected."+      },+      {+        "number": "23",+        "name": "SYNC",+        "type": "output",+        "description": "Synchronization output; external synchronization clock output for multi-device applications."+      },+      {+        "number": "24",+        "name": "SS",+        "type": "input",+        "description": "Soft-start pin; connect capacitor to SGND to set soft-start duration."+      },+      {+        "number": "25",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 25 added from the footprint"+        ],+        "pages_sent": 12,+        "cost_usd": 0.1064,+        "at": "2026-10-03T08:44:14"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588921792752717824",+        "pages": 46,+        "sha256": "7a9c0b210e85f573",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 25,+        "described": 25,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file