component
LED6000PHTR
Public Made by Adomby adom
STMicroelectronics LED Drivers, HTSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 5h ago |
| viewers | 5h ago |
| led6000phtr-etched.glb | 5h ago |
| led6000phtr-etched.step | 5h ago |
| led6000phtr-hero.glb | 5h ago |
| led6000phtr-hero.overlay.json | 5h ago |
| led6000phtr.glb | 5h ago |
| led6000phtr.kicad_mod | 5h ago |
| led6000phtr.kicad_sym | 5h ago |
| led6000phtr.lbr | 5h ago |
| led6000phtr.step | 5h ago |
| package.json | 5h ago |
| page.json | 5h ago |
| README.md | 5h ago |
LED6000PHTR
STMicroelectronics · LED Drivers · HTSSOP-16-EP
LED6000PHTR from STMicroelectronics, in a HTSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBIAS | power_in | Auxiliary input that can be used to supply a part of the analog circuitry to increase efficiency at light-load; connect to GND if not used or bypass with 1 µF ceramic capacitor if supplied by auxiliary rail. |
| 2 | VIN | power_in | DC input voltage. |
| 3 | VIN | power_in | DC input voltage. |
| 4 | VCC | power_in | Filtered DC input voltage to the internal circuitry; bypass to signal GND by 1 µF ceramic capacitor. |
| 5 | EN | input | Active high enable pin; connect to VCC pin if not used. |
| 6 | SS | passive | An internal current generator (5 µA typ.) charges the external capacitor to implement soft-start. |
| 7 | SYNCH | bidirectional | Master/slave synchronization for preventing beating noise in low-noise applications or reducing input current RMS value. |
| 8 | COMP | output | Output of error amplifier; compensation network is connected at this pin. |
| 9 | FB | input | Inverting input of error amplifier. |
| 10 | FSW | input | A pull-down resistor to GND selects the switching frequency. |
| 11 | ILIM | input | A pull-down resistor to GND selects the peak current limitation. |
| 12 | DIM | input | A PWM signal in this input pin implements LED PWM current dimming; pulled-down by internal 2 µA current. |
| 13 | LX | passive | Switching node. |
| 14 | LX | passive | Switching node. |
| 15 | BOOT | passive | Connect external capacitor (100 nF typ.) between BOOT and LX pins; gate charge required to drive internal n-DMOS is recovered by internal regulator during off-time. |
| 16 | GND | power_in | Signal GND. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | HTSSOP-16-EP |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 17 |
CAD (KiCad official)
- Symbol:
LED6000PHTR - Footprint:
Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm - 3D model: HTSSOP-16-EP (KiCad packages3D, STEP)
- 3D model files:
led6000phtr-etched.step/led6000phtr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);led6000phtr.step/led6000phtr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (49 pp, sha256
e36c28bbf8e83b45, retrieved 2026-10-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).