component
LED6000PHR
Public Made by Adomby adom
STMicroelectronics LED Drivers, TSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279
{
"schema_version": 1,
"type": "component",
"slug": "led6000phr",
"title": "LED6000PHR",
"brief": "STMicroelectronics LED Drivers, TSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"led drivers",
"led6000phr",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "LED6000PHR",
"manufacturer": "STMicroelectronics",
"package": "TSSOP-16-EP",
"pin_count": 17,
"category": "LED Drivers",
"subcategory": "LED Drivers",
"datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590903251187953664",
"parts": {
"symbol": "led6000phr.kicad_sym",
"footprint": "led6000phr.kicad_mod",
"model_3d": "led6000phr-hero.glb",
"model_3d_plain": "led6000phr.glb",
"model_3d_step": "led6000phr-etched.step",
"model_3d_step_plain": "led6000phr.step",
"lbr": "led6000phr.lbr"
},
"distributor_links": {
"lcsc": "C2970540",
"digikey": "497-15939-5-ND",
"mouser": "511-LED6000PHR"
},
"distributor_check": {
"checked_at": "2026-10-07T09:35:47Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "497-15939-5-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "511-LED6000PHR",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "VBIAS",
"type": "power_in",
"description": "Auxiliary DC input voltage for analog circuitry power supply; bypass to signal GND with 1 µF ceramic capacitor when used with auxiliary rail, or connect to GND when not used."
},
{
"number": "2",
"name": "VIN",
"type": "power_in",
"description": "DC input voltage supply; 4.5 V to 61 V operating range."
},
{
"number": "3",
"name": "VIN",
"type": "power_in",
"description": "DC input voltage supply; 4.5 V to 61 V operating range."
},
{
"number": "4",
"name": "VCC",
"type": "power_in",
"description": "Filtered DC input voltage for internal circuitry; bypass to signal GND with 1 µF ceramic capacitor."
},
{
"number": "5",
"name": "EN",
"type": "input",
"description": "Active high enable control input; connect to VCC pin when enable function is not used."
},
{
"number": "6",
"name": "SS",
"type": "output",
"description": "Soft-start capacitor connection pin; internal 5 µA current generator charges external capacitor to set soft-start timing."
},
{
"number": "7",
"name": "SYNCH",
"type": "bidirectional",
"description": "Synchronization input/output pin supporting master-slave clock distribution to up to 5 slave devices."
},
{
"number": "8",
"name": "COMP",
"type": "output",
"description": "Error amplifier output for external compensation network connection."
},
{
"number": "9",
"name": "FB",
"type": "input",
"description": "Inverting input of the error amplifier with nominal reference voltage 0.240 V to 0.260 V."
},
{
"number": "10",
"name": "FSW",
"type": "input",
"description": "Switching frequency selection pin; pull-down resistor to GND selects operating frequency from 250 kHz to 1.5 MHz."
},
{
"number": "11",
"name": "ILIM",
"type": "input",
"description": "Peak current limit selection pin; pull-down resistor to GND selects current limitation from 0.68 A to 4.1 A."
},
{
"number": "12",
"name": "DIM",
"type": "input",
"description": "PWM dimming control input (0 V to VCC); pulled-down by internal 2 µA current for LED brightness modulation."
},
{
"number": "13",
"name": "LX",
"type": "output",
"description": "High-side switching node; output of internal n-DMOS connected to output inductor."
},
{
"number": "14",
"name": "LX",
"type": "output",
"description": "High-side switching node; output of internal n-DMOS connected to output inductor."
},
{
"number": "15",
"name": "BOOT",
"type": "power_in",
"description": "Bootstrap capacitor connection pin (100 nF typical); gate drive charge for internal n-DMOS is recovered by internal regulator during off-time."
},
{
"number": "16",
"name": "GND",
"type": "power_in",
"description": "Signal ground reference for all circuits."
},
{
"number": "17",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"exposed pad 17 added from the footprint",
"dropped thermal pad ['EP'] absent from footprint"
],
"pages_sent": 12,
"cost_usd": 0.0901,
"at": "2026-10-07T09:35:31"
},
"datasheet": {
"url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590903251187953664",
"pages": 49,
"sha256": "e36c28bbf8e83b45",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 17,
"described": 17,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "led6000phr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
5,
1.1
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "7982746831c0bd23f4690608869ad67776faae5c762fb0376666126a3998921b",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "led6000phr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
5,
1.1
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "216cda04c9bc7665b6a5a43a0c46d3278480b219f7cb4735ec3980221750147c",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "STMicroelectronics",
"Package": "TSSOP-16-EP",
"Category": "LED Drivers",
"Pins": "17"
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"led6000phr"
],
"discovery_pitch": "LED6000PHR (STMicroelectronics) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray",
"email": "[email protected]"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"led6000phr.kicad_sym",
"led6000phr.kicad_mod",
"led6000phr.glb",
"led6000phr.step",
"led6000phr.lbr",
"docs/hero.png",
"docs/led6000phr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"led6000phr-hero.glb",
"led6000phr-hero.overlay.json"
],
"visibility": {
"public": true
}
}