← Commit history

Rev B: 2-layer LED-field-only tile, 1580 LEDs, 3D render + architecture rewrite

John Lauer ·ff1b180f75 · ·parent de5e2cc
3 files changed +24−18
README.md+23−17
@@ -1,32 +1,38 @@ # LED Grid Wall — own a pixel in the Adom workcell -A wall of **12,960 individually addressable mini RGB LEDs** on a LrgLrg (576×576 mm) workcell-scaffold: 9 identical tiles in a 3×3 grid, each tile carrying 1,440 Dialight 587-1024-147F+A wall of **14,220 individually addressable mini RGB LEDs** on a LrgLrg (576×576 mm) workcell+scaffold: 9 identical tiles in a 3×3 grid, each tile carrying 1,580 Dialight 587-1024-147F 2020-package LEDs at 4 mm pitch. Every LED can be **owned by a remote Adom user** who sets its color anytime; a live camera in the workcell watches the wall, so a design emerges as users coordinate with each other. -## Tile 3D layout (1,424 LEDs placed)+## Tile 3D layout — rev B (1,580 LEDs, 2-layer) -![Tile 3D render — top](https://wiki.adom.inc/api/v1/pages/adom/led-grid-wall/files/docs/tile-3d-top.png)+![Tile rev B 3D render — top](https://wiki.adom.inc/api/v1/pages/adom/led-grid-wall/files/docs/tile-3d-revb-top.png) -Native KiCad 3D render of the full tile: **1,424 Dialight 587-1024-147F LEDs at 4 mm pitch** in a-contiguous 40×36 field, 4 gold corner machine-contact docking pads (power + ground + signal to the-controller below), and the controller strip along the bottom edge. Per the 2026-10-01 design-review the strip is moving OFF the tile onto a separate under-tile controller board (2-layer tile,-no back-side parts, machine-pin link) — the LED field itself is unchanged and DRC-clean.+Native KiCad 3D render of the current tile: **1,580 Dialight 587-1024-147F LEDs at 4 mm pitch**+in a contiguous 40×40 field, 4 gold corner machine-contact docking pads (V5×2 + GND×2) and+4 small signal machine pins along the bottom edge. **No MCU strip, no back-side parts** — the+controller lives on its own board under the tile. F.Cu = V5 pour + data links, B.Cu = solid GND.+0 DRC errors. (The LED bodies render black here — the real part is clear epoxy; the 3D model+color is being corrected.)  ## Architecture -- **Tile (this build's one board design):** 160 × 160 mm, 4-layer, 1,440 LEDs in a 40×36 grid.-  The bottom 16 mm strip carries the brains: an **RP2040** (4 parallel PIO-driven WS2812 chains,-  ~90 fps full-tile refresh), **USB-C** to the workcell host, W25Q128 flash, 12 MHz crystal,-  AP2112K-3.3 3.3 V rail, and a 74AHCT125 level shifter for 5 V LED data. Power enters through-  Adom **large machine contacts** (5 V, firmware-capped at 20 A per tile).+- **Tile (this build's one board design):** 160 × 160 mm, **2-layer, LED-field only** — 1,580 LEDs+  in a 40×40 grid (16 docking cells + 4 signal-pin cells omitted). No MCU, no back-side parts.+  F.Cu is the V5 pour + WS2812 data links; B.Cu is a solid GND plane (GND via-in-pad per LED).+  Power enters through the 4 corner **large machine contacts** (V5×2 + GND×2, diagonal);+  the 4 chain data inputs enter through **medium machine pins** (tails down) at the chain starts.+- **Controller (separate small board, one per tile, mounted under the tile):** RP2040 (4 parallel+  PIO-driven WS2812 chains, ~75 fps full-tile refresh), W25Q128 flash, 12 MHz crystal,+  AP2112K-3.3 rail, 74AHCT125 level shifter. I2C mesh between controllers; the master's **USB-C**+  is the wall's uplink to the workcell host. Machine pins rise into the tile's contacts above. - **Scaffold:** 3×3 tiles on the 576×576 LrgLrg scaffold; the LED fields of adjacent tiles align-  so the grid reads as one continuous canvas on camera. MCU strips form three thin horizontal bands.-- **Firmware:** `ledgrid_tile` (Pico SDK, PIO + DMA, USB CDC bulk frames, global power cap,-  dead-host watchdog). Host reference: `host/tile_host.py` maps (tile, row, col) → (chain, index).+  so the grid reads as one continuous canvas on camera.+- **Firmware:** one UF2 for all controllers (Pico SDK, PIO + DMA, I2C mesh, global 20 A/tile power+  cap, dead-host watchdog); role from address straps. Host reference: `host/tile_host.py` maps+  (tile, row, col) → (chain, index). Deferred to a later stage per the 2026-10-01 review. - **Ownership app:** remote users claim and color LEDs from the Adom cloud; the workcell host   relays frames to tiles over USB. Simulation available while boards are at the fab. 
docs/tile-3d-revb-top.pngadded
⋯ 1 unchanged line ⋯
package.json+1−1
@@ -4,7 +4,7 @@   "type": "hardware",   "kind": "project",   "version": "0.1.1",-  "description": "A 12,960-LED addressable wall for the Adom workcell: 9 identical 160x160mm tiles (1,440 Dialight 587-1024-147F 2020 LEDs each, RP2040 + USB-C per tile) on a LrgLrg 576x576 scaffold. Remote Adom users each own a pixel.",+  "description": "A 14,220-LED addressable wall for the Adom workcell: 9 identical 160x160mm tiles (1,580 Dialight 587-1024-147F 2020 LEDs each, 2-layer, LED-field-only) on a LrgLrg 576x576 scaffold, driven by RP2040 controller boards under the tiles. Remote Adom users each own a pixel.",   "tags": [     "hardware",     "project",