Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents

README

markdown

LDL1117S18R

STMicroelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-4

LDL1117S18R from STMicroelectronics, in a SOT-223-4. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground reference for the regulator. Connect to a clean analog ground plane close to the input/output capacitor return paths.
2 VOUT power_out Regulated 1.8 V output (LDL1117S18R variant). Guaranteed 1.2 A output current with typical 350 mV dropout at 1.2 A. Requires a minimum 4.7 µF ceramic output capacitor (X5R/X7R) placed close to this pin for stability. The exposed tab is internally connected to VOUT.
3 VIN power_in Input supply pin. Operating range 2.6 V to 18 V (absolute max 20 V, -0.3 to 20 V AMR). Requires a minimum 1 µF ceramic input capacitor placed as close as possible to this pin. UVLO turn-on threshold is typically 2.3 V with 200 mV hysteresis.
4 TAB power_out Exposed metal tab on SOT-223 package, internally connected to VOUT. Serves as the primary thermal dissipation path - solder to a copper pour tied to the VOUT net to reduce θJ-A.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOT-223-4
Category PMIC
Pins 4

Ordering variants

  • LDL1117S18R

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input supply voltage VIN -0.3 20 V 5
Output voltage VOUT -0.3 V Printed as -0.3 to VIN + 0.3; upper limit is a formula, not a number 5
Operating junction temperature TJ-OP -40 125 °C 5
Maximum junction temperature TJ-MAX 150 °C 5
Storage temperature TSTG -55 150 °C 5
Thermal resistance junction-to-case θJ-C 15 °C/W 5
Thermal resistance junction-to-ambient θJ-A 120 °C/W 5
Operating input voltage VIN 2.6 18 V 6
Turn-on threshold (UVLO) VUVLO 2.3 2.4 V 6
UVLO hysteresis VUVLO 200 mV 6
VOUT accuracy VOUT -2 2 % IOUT = 10 mA, TJ = 25 °C 6
VOUT accuracy VOUT -3 3 % IOUT = 10 mA, -40 °C < TJ < 125°C 6
Line regulation ΔVOUT 0.002 0.02 %/V VOUT + 1 V (1) ≤ VIN ≤ 18 V, IOUT = 10 mA, -40 °C < TJ < 125 °C 6
Load regulation ΔVOUT 5 15 mV IOUT = 10 mA to 1.2 A, -40 °C < TJ < 125 °C 6
Dropout voltage VDROP 350 600 mV IOUT = 1.2 A, VOUT > 2.5 V, -40 °C < TJ < 125 °C 6
Output noise voltage eN 60 µVRMS/VOUT 10 Hz to 100 kHz, IOUT = 100 mA 6
Supply voltage rejection at 120 Hz SVR 87 dB VIN = VOUT(NOM) +1 V ± VRIPPLE, VRIPPLE = 0.5 V, f = 120 Hz 6
Supply voltage rejection at 1 kHz SVR 80 dB VIN = VOUT(NOM) +1 V ± VRIPPLE, VRIPPLE = 0.5 V, f = 1 kHz 6
Supply voltage rejection at 100 kHz SVR 65 dB VIN = VOUT(NOM) +1 V ± VRIPPLE, VRIPPLE = 0.5 V, f = 100 kHz 6
Quiescent current IQ 250 500 µA IOUT = 0 mA to 1.2 A, -40 °C < TJ < 125 °C 6
Output current (short-circuit current limit) ISC 1.5 2 A 6
Thermal shutdown TSHDN 175 °C 6
Thermal shutdown hysteresis TSHDN 25 °C 6

CAD (KiCad official)

  • Symbol: LDL1117S18R
  • Footprint: Package_TO_SOT_SMD:SOT-223
  • 3D model: SOT-223-4 (KiCad packages3D, STEP)
  • 3D model files: ldl1117s18r-etched.step / ldl1117s18r-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ldl1117s18r.step / ldl1117s18r.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (None pp, sha256 ffbb9e03f7f6d0c4, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF