3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLDK130M18R
STMicroelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L
LDK130M18R from STMicroelectronics, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input voltage supply to the LDO regulator, operating range 1.9 V to 5.5 V |
| 2 | GND | power_in | Common ground reference |
| 3 | EN | input | Enable pin logic control input: low = shutdown mode with quiescent current <1 µA, high = active regulator operation |
| 4 | BYP | passive | Bypass capacitor connection point for output noise reduction on fixed versions (optional, pin must be left floating with no board routing if not used) |
| 5 | OUT | output | Regulated output voltage with 300 mA guaranteed output current and 100 mV typical dropout voltage at 100 mA load |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-5L |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating input voltage | VIN | 1.9 | 5.5 | V | 9 | ||
| VOUT accuracy | VOUT | -2 | 2 | % | IOUT = 1 mA, TJ = 25 °C | 9 | |
| VOUT accuracy | VOUT | -3 | 3 | % | IOUT = 1 mA, -40 °C < TJ < 125 °C | 9 | |
| Dropout voltage | VDROP | 200 | 400 | mV | IOUT = 300 mA, VOUT = 2.5 V, 40 °C < TJ < 125 °C | 9 | |
| Quiescent current | IQ | 30 | 60 | µA | IOUT = 0 mA, -40 °C < TJ < 125 °C | 9 | |
| Quiescent current | IQ | 70 | 120 | µA | IOUT = 300 mA, -40 °C < TJ < 125 °C | 9 | |
| Input current in OFF mode | 1 | µA | VEN = GND | 9 | |||
| Enable input logic low | VEN | 0.4 | V | VIN = 1.9 V to 5.5 V, -40 °C < TJ < 125 °C | 9 | ||
| Enable input logic high | VEN | 1.2 | V | VIN = 1.9 V to 5.5 V, -40 °C < TJ < 125 °C | 9 | ||
| Enable pin input current | IEN | 100 | nA | VSHDN = VIN | 9 | ||
| Output capacitor | COUT | 1 | 22 | µF | Capacitance (see Section 6: Typical performance characteristics) | 9 | |
| Thermal shutdown | TSHDN | 160 | °C | 9 | |||
| Thermal shutdown hysteresis | TSHDN | 20 | °C | 9 | |||
| DC input voltage | VIN | -0.3 | 7 | V | Referred to GND | 8 | |
| DC output voltage | VOUT | -0.3 | V | Upper limit printed as VI + 0.3 V | 8 | ||
| Enable input voltage | VEN | -0.3 | V | Upper limit printed as VI + 0.3 V | 8 | ||
| ADJ/bypass pin voltage | VBYP/ADJ | 2 | V | 8 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 8 | ||
| Operating junction temperature range | TOP | -40 | 125 | °C | 8 | ||
| Thermal resistance junction ambient | RthJA | 160 | °C/W | SOT23-5L package | 8 | ||
| Thermal resistance junction case | RthJC | 68 | °C/W | SOT23-5L package | 8 |
CAD (KiCad official)
- Symbol:
LDK130M18R - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
ldk130m18r-etched.step/ldk130m18r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ldk130m18r.step/ldk130m18r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (27 pp, sha256
138c181683a3027b, retrieved 2026-10-06, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).