main
Ray
ldk120m33r: specified limits as data (metadata.characteristics, 17 rows from the datasheet)
6ce1ae0
LDK120M33R
STMicroelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L
LDK120M33R from STMicroelectronics, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply voltage to the LDO. Operating range 1.9 V to 5.5 V (absolute max -0.3 V to +7 V). Typically bypassed with a 1 µF ceramic capacitor to GND. |
| 2 | GND | power_in | Common ground reference for the device. All voltages in the datasheet are referred to this pin. |
| 3 | EN | input | Enable logic input. Low (<=0.4 V) puts the LDO into shutdown (<1 µA); High (>=1.2 V) enables the regulator. Input current ~100 nA. Absolute max -0.3 V to VIN+0.3 V. |
| 4 | BYP | passive | Bypass capacitor pin for noise reduction on the fixed-output version. A 10 nF ceramic capacitor from BYP to GND reduces output noise (typ. 51 µVRMS with CBYP vs 148 µVRMS without). Optional - if unused, leave floating with no PCB routing. Absolute max 2 V. |
| 5 | OUT | power_out | Regulated 3.3 V output (±2% at 25 °C, ±3% over -40 °C to 125 °C). Delivers up to 200 mA. Requires a 1 µF (up to 22 µF) ceramic output capacitor for stability. Internally current-limited (~400 mA short-circuit) and thermally protected (160 °C shutdown). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-5L |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
LDK120M33RLDK120C33RLDK120PU33R
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating input voltage | VIN | 1.9 | 5.5 | V | 7 | ||
| VOUT accuracy | VOUT | -2 | 2 | % | IOUT=1 mA, TJ=25 °C | 7 | |
| VOUT accuracy | VOUT | -3 | 3 | % | IOUT=1 mA, -40 °C<TJ<125 °C | 7 | |
| Static line regulation | VOUT | 0.05 | %/V | VOUT +1 V VIN 5.5 V, IOUT=1 mA | 7 | ||
| Static load regulation | VOUT | 0.006 | %/mA | IOUT = 1 mA to 200 mA | 7 | ||
| Dropout voltage | VDROP | 150 | 300 | mV | IOUT = 200 mA, VOUT=2.5 V, 40 °C<TJ<125 °C | 7 | |
| Quiescent current | IQ | 30 | 60 | µA | IOUT=0 mA, -40 °C<TJ<125 °C | 7 | |
| Quiescent current | IQ | 50 | 100 | µA | IOUT=200 mA, -40 °C<TJ<125 °C | 7 | |
| Output capacitor capacitance | COUT | 1 | 22 | µF | Capacitance (see Section 6: Typical performance characteristics) | 7 | |
| VIN DC input voltage | VIN | -0.3 | 7 | V | 6 | ||
| VOUT DC output voltage | VOUT | -0.3 | V | 6 | |||
| Enable input voltage | VEN | -0.3 | V | 6 | |||
| ADJ/Bypass pin voltage | VBYP/ADJ | 2 | V | 6 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 6 | ||
| Operating junction temperature range | TOP | -40 | 125 | °C | 6 | ||
| Thermal resistance junction-ambient, SOT23-5L | RthJA | 160 | °C/W | 6 | |||
| Thermal resistance junction-case, SOT23-5L | RthJC | 68 | °C/W | 6 |
CAD (KiCad official)
- Symbol:
LDK120M33R - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
ldk120m33r-etched.step/ldk120m33r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ldk120m33r.step/ldk120m33r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (None pp, sha256
1684d802fa69801e, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LDK120M33R
**STMicroelectronics** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L
LDK120M33R from STMicroelectronics, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply voltage to the LDO. Operating range 1.9 V to 5.5 V (absolute max -0.3 V to +7 V). Typically bypassed with a 1 µF ceramic capacitor to GND. |
| 2 | GND | power_in | Common ground reference for the device. All voltages in the datasheet are referred to this pin. |
| 3 | EN | input | Enable logic input. Low (<=0.4 V) puts the LDO into shutdown (<1 µA); High (>=1.2 V) enables the regulator. Input current ~100 nA. Absolute max -0.3 V to VIN+0.3 V. |
| 4 | BYP | passive | Bypass capacitor pin for noise reduction on the fixed-output version. A 10 nF ceramic capacitor from BYP to GND reduces output noise (typ. 51 µVRMS with CBYP vs 148 µVRMS without). Optional - if unused, leave floating with no PCB routing. Absolute max 2 V. |
| 5 | OUT | power_out | Regulated 3.3 V output (±2% at 25 °C, ±3% over -40 °C to 125 °C). Delivers up to 200 mA. Requires a 1 µF (up to 22 µF) ceramic output capacitor for stability. Internally current-limited (~400 mA short-circuit) and thermally protected (160 °C shutdown). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-5L |
| Category | PMIC |
| Pins | 5 |
## Ordering variants
Same part, different packaging or reel option.
- `LDK120M33R`
- `LDK120C33R`
- `LDK120PU33R`
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating input voltage | VIN | 1.9 | | 5.5 | V | | 7 |
| VOUT accuracy | VOUT | -2 | | 2 | % | IOUT=1 mA, TJ=25 °C | 7 |
| VOUT accuracy | VOUT | -3 | | 3 | % | IOUT=1 mA, -40 °C<TJ<125 °C | 7 |
| Static line regulation | VOUT | | | 0.05 | %/V | VOUT +1 V VIN 5.5 V, IOUT=1 mA | 7 |
| Static load regulation | VOUT | | | 0.006 | %/mA | IOUT = 1 mA to 200 mA | 7 |
| Dropout voltage | VDROP | | 150 | 300 | mV | IOUT = 200 mA, VOUT=2.5 V, 40 °C<TJ<125 °C | 7 |
| Quiescent current | IQ | | 30 | 60 | µA | IOUT=0 mA, -40 °C<TJ<125 °C | 7 |
| Quiescent current | IQ | | 50 | 100 | µA | IOUT=200 mA, -40 °C<TJ<125 °C | 7 |
| Output capacitor capacitance | COUT | 1 | | 22 | µF | Capacitance (see Section 6: Typical performance characteristics) | 7 |
| VIN DC input voltage | VIN | -0.3 | | 7 | V | | 6 |
| VOUT DC output voltage | VOUT | -0.3 | | | V | | 6 |
| Enable input voltage | VEN | -0.3 | | | V | | 6 |
| ADJ/Bypass pin voltage | VBYP/ADJ | | | 2 | V | | 6 |
| Storage temperature range | TSTG | -65 | | 150 | °C | | 6 |
| Operating junction temperature range | TOP | -40 | | 125 | °C | | 6 |
| Thermal resistance junction-ambient, SOT23-5L | RthJA | | 160 | | °C/W | | 6 |
| Thermal resistance junction-case, SOT23-5L | RthJC | | 68 | | °C/W | | 6 |
## CAD (KiCad official)
- Symbol: `LDK120M33R`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files: `ldk120m33r-etched.step` / `ldk120m33r-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ldk120m33r.step` / `ldk120m33r.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/ldk120m33r.pdf) (None pp, sha256 `1684d802fa69801e`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ldk120m33r-datasheet.pdf)