main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs ldi1117-3-3h: rebuilt as a full factory component page (was a placeholder) · Ray
viewers ldi1117-3-3h: one-pass backfill (courtyard 63.36 -> 57.13 mm2 (margin 0.25, default), hero: page declares one already) · Ray
ldi1117-3-3h-etched.fit.json ldi1117-3-3h: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ldi1117-3-3h-etched.glb ldi1117-3-3h: etch along the lead row, tab up; full MPN text (service-occt 1.9.3) (service-occt 1.6.0, from the plain S… · Ray
ldi1117-3-3h-etched.step ldi1117-3-3h: rebuilt as a full factory component page (was a placeholder) · Ray
ldi1117-3-3h-hero.glb Publish 0.2.1 · Ray
ldi1117-3-3h-hero.overlay.json Publish 0.2.1 · Ray
ldi1117-3-3h.glb Publish 0.1.0 · Ray
ldi1117-3-3h.kicad_mod ldi1117-3-3h: one-pass backfill (courtyard 63.36 -> 57.13 mm2 (margin 0.25, default), hero: page declares one already) · Ray
ldi1117-3-3h.kicad_sym Publish 0.2.0 · Ray
ldi1117-3-3h.lbr ldi1117-3-3h: one-pass backfill (courtyard 63.36 -> 57.13 mm2 (margin 0.25, default), hero: page declares one already) · Ray
ldi1117-3-3h.step Publish 0.1.0 · Ray
package.json Publish 0.2.1 · Ray
page.json Publish 0.2.1 · Ray
README.md Publish 0.2.0 · Ray

LDI1117-3.3H

DIOTEC · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223

LDI1117-3.3H from DIOTEC, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ADJ/GND input ADJ/GND
2 VOUT power_out Regulated 3.3 V output. Typical output tolerance ±1.0% (3.267-3.333 V at 10 mA), up to 1 A load. Requires at least a 22 µF output capacitor for stability. KiCad's SOT-223-3_TabPin2 joins the tab to this pad (pin 2/4 VOUT).
3 VIN power_in Unregulated input supply. Recommended operating range up to 15 V, absolute maximum 20 V. Requires at least a 10 µF input capacitor. Must exceed VOUT by ≥1.15 V at 1 A for regulation.

Key specifications

Parameter Value
Manufacturer DIOTEC
Package SOT-223
Category PMIC
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage (10 mA load, VIN 5.0 V) VOUT 3.267 3.3 3.333 V IOUT = 10 mA, VIN = 5.0 V 7
Output voltage (full load/line range) VOUT 3.235 3.3 3.365 V 10 mA ≤ IOUT ≤ 1 A, 4.75 V ≤ VIN ≤ 10 V 7
Output voltage tolerance Tol. (Vout) -1 1 % 1
Line regulation ΔVOUT 1 6 mV IOUT = 10 mA, 1.5 V ≤ VIN - VOUT ≤ 10 V 7
Load regulation ΔVOUT 1 10 mV VIN - VOUT = 2 V, 10 mA ≤ IOUT ≤ 1 A 7
Dropout voltage at 0.1 A VD 1 1.1 V IOUT = 0.1 A 7
Dropout voltage at 0.5 A VD 1.08 1.18 V IOUT = 0.5 A 7
Dropout voltage at 1.0 A VD 1.15 1.25 V IOUT = 1.0 A 7
Current limit ILIMIT 1.25 1.35 A VIN - VOUT = 2 V 7
Quiescent current IQ 5 10 mA VIN = VOUT + 1.25 V 7
Ripple rejection VRR 50 dB IOUT = 1 A, f = 120 Hz, Tj = 25°C, VIN - VOUT = 3 V, Vripple = 1 Vpp 7
Input voltage (recommended operating) VIN 15 V 1
Junction temperature (recommended operating) TJ -40 125 °C 1
Input voltage (absolute maximum) VIN 20 V 1
Junction temperature (absolute maximum) Tj 150 °C 1
Storage temperature TS -55 150 °C 1
Typical thermal resistance junction to ambient RthA 100 K/W Mounted on P.C. board with 100 x 100 mm² copper pad at each terminal 7
Typical thermal resistance junction to case RthC 15 K/W 7

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper copper pad at each terminal 2

CAD (KiCad official)

  • Symbol: LDI1117-3.3H
  • Footprint: Package_TO_SOT_SMD:SOT-223-3_TabPin2
  • 3D model: SOT-223 (KiCad packages3D, STEP)
  • 3D model files: ldi1117-3-3h-etched.step / ldi1117-3-3h-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ldi1117-3-3h.step / ldi1117-3-3h.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: DIOTEC datasheet (11 pp, sha256 20c2d2bc0dad8962, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF