main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ldc0851hdsgr: viewers · Ray
ldc0851hdsgr-etched.glb Publish 0.1.0 · Ray
ldc0851hdsgr-etched.step ldc0851hdsgr: factory component page (tier=lcsc) · Ray
ldc0851hdsgr-hero.glb ldc0851hdsgr: hero GLB from the etched model (keeps the MPN mark) · Ray
ldc0851hdsgr-hero.overlay.json Publish 0.1.0 · Ray
ldc0851hdsgr.glb Publish 0.1.0 · Ray
ldc0851hdsgr.kicad_mod Publish 0.1.0 · Ray
ldc0851hdsgr.kicad_sym Publish 0.1.0 · Ray
ldc0851hdsgr.lbr Publish 0.1.0 · Ray
ldc0851hdsgr.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

LDC0851HDSGR

Texas Instruments · Specialized Sensors · WSON-8-EP(2x2)

LDC0851HDSGR from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 LCOM passive Common coil input (analog) shared by the sense and reference coils; voltage rating on this pin is -0.3 V to 2 V.
2 LSENSE passive Sense coil input (analog); voltage rating is -0.3 V to 3.6 V.
3 LREF passive Reference coil input (analog); voltage rating is -0.3 V to 3.6 V.
4 ADJ passive Threshold adjust pin (analog) used with a resistor to program the switch threshold; voltage rating is -0.3 V to 2 V.
5 OUT output Push-pull switch output that goes high when LS > LR and low when LS < LR.
6 EN input Enable input; voltage rating is -0.3 V to 3.6 V.
7 GND power_in Ground pin that must always be connected to ground.
8 VDD power_in Power supply pin, recommended operating range 1.71 V to 3.46 V (absolute maximum 3.6 V).
9 DAP power_in Exposed die attach pad internally connected to GND; connect to the same potential as GND for improved thermal performance, though it can be left floating and must not be the primary ground.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-8-EP(2x2)
Category Sensors
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage Range VDD 3.6 V 4
Voltage on LSENSE, LREF, and EN Vi -0.3 3.6 V 4
Voltage on ADJ and LCOM Vi -0.3 2 V 4
Current LSENSE, LREF, and VOUT IA 5 mA 4
Junction Temperature TJ -55 150 °C 4
Storage Temperature Tstg -65 150 °C 4
ESD HBM V(ESD) -1000 1000 V Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 4
ESD CDM V(ESD) -250 250 V Charged-device model (CDM), per JEDEC specification JESD22-C101 4
Supply Voltage VDD 1.71 3.46 V 4
Operating Temperature TA -40 125 °C 4
Junction-to-ambient thermal resistance RθJA 67.4 °C/W DSG (WSON) 8 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 89.3 °C/W DSG (WSON) 8 pins 4
Junction-to-board thermal resistance RθJB 37.3 °C/W DSG (WSON) 8 pins 4
Junction-to-top characterization parameter ψJT 2.4 °C/W DSG (WSON) 8 pins 4
Junction-to-board characterization parameter ψJB 37.7 °C/W DSG (WSON) 8 pins 4
Junction-to-case (bottom) thermal resistance RθJC(bot) 9.2 °C/W DSG (WSON) 8 pins 4
Supply Voltage VDD 1.71 3.46 V 5
Static Supply Current ISTATIC 0.7 mA 5
Dynamic Supply Current (not including sensor current) IDYN 0.66 mA ƒSENSOR = 15 MHz, CPARASITIC = 22 pF 5
Shutdown Mode Supply Current ISD 0.14 1 µA 5
Maximum sensor current ISENSOR_MAX 4.35 mA VDD = 1.71 V 5
Maximum sensor current ISENSOR_MAX 6 mA VDD = 3.3 V 5
Sensor Minimum Inductance LSENSOR_MIN 2.5 µH CTOTAL = 33 pF, VDD = 1.71 V 5
Sensor Minimum Inductance LSENSOR_MIN 1.8 µH CTOTAL = 33 pF, VDD = 3.3 V 5
Max Sensor Resonant Frequency ƒSENSOR_MAX 19 MHz Sensor inductance = 2 µH, CTOTAL = 33 pF 5
Minimum total capacitance on LCOM CTOTAL 33 pF Includes parasitic pin capacitance and PCB parasitic capacitance 5
Pin parasitic capacitance on LCOM CIN 12 pF 5
Pin parasitic capacitance on LREF and LSENSE CIN 8 pF 5
Switching distance hysteresis dHYST 2.5 % Two matched 10 mm diameter sensors, switching distance 3 mm 5
Switching threshold tolerance dTOL 0.1 % Two matched 10 mm diameter sensors, switching distance 3 mm 5
Adjust input range VADJ 0 V 0 to VDD/2 5
Adjust threshold tolerance VADJ_TOL -6 6 mV 5
Input High Voltage VIH 0.8 xVDD 5
Input Low Voltage VIL 0.2 xVDD 5
Output Low Voltage VOL 0.4 V 1mA sink current 5
Conversion time tCONVERSION 290 µs ƒSENSOR = 15 MHz 6
Output delay time (Response time) tDELAY 580 µs ƒSENSOR = 15 MHz 6
Start-up time tSTART 450 µs 6
Shutdown-to-active mode transition time tAMT 450 µs 6
Active-to-shutdown mode transition time tSMT 1 µs <1 6

CAD (KiCad official)

  • Symbol: LDC0851HDSGR
  • Footprint: Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm
  • 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: ldc0851hdsgr-etched.step / ldc0851hdsgr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ldc0851hdsgr.step / ldc0851hdsgr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (40 pp, sha256 23b2bf347937c6fb, retrieved 2026-10-22, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF