main
Ray
ld8116dgl: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
7d0294c
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181
{
"schema_version": 1,
"type": "component",
"slug": "ld8116dgl",
"title": "LD8116DGL",
"brief": "Leadtrend Tech AC-DC Controllers and Regulators, SOT-26. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"pmic",
"ld8116dgl"
],
"component": {
"mpn": "LD8116DGL",
"manufacturer": "Leadtrend Tech",
"package": "SOT-26",
"pin_count": 6,
"category": "PMIC",
"subcategory": "AC-DC Controllers and Regulators",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/15adc2f3c935ecb2d8554e0b15615a73.pdf",
"parts": {
"symbol": "ld8116dgl.kicad_sym",
"footprint": "ld8116dgl.kicad_mod",
"model_3d": "ld8116dgl-etched.glb",
"model_3d_plain": "ld8116dgl.glb",
"model_3d_step": "ld8116dgl-etched.step",
"model_3d_step_plain": "ld8116dgl.step",
"lbr": "ld8116dgl.lbr"
},
"distributor_links": {},
"pins": [
{
"number": "1",
"name": "VCC",
"type": "power_in",
"description": "Supply voltage pin. Recommended operating range 15V to 56V (absolute max -0.3V to 60V). Requires a 0.1uF-0.47uF SMD ceramic bypass capacitor close to the pin. UVLO_ON typ 7.0V, UVLO_OFF typ 6.0V. Operating current typ 600uA."
},
{
"number": "2",
"name": "GND",
"type": "power_in",
"description": "Ground or power return pin."
},
{
"number": "3",
"name": "OUT",
"type": "output",
"description": "Dimming output. Open-drain configuration (typ 1.5kHz output frequency, sink up to 20mA recommended / 30mA absolute max, VOUT_LOW <=200mV @ 2mA). Connect to a power supply via a pull-up resistor, typically driving the DIM input of a downstream LED driver via an opto-coupler."
},
{
"number": "4",
"name": "ISET",
"type": "passive",
"description": "Sets bias current of the DIM pin via a resistor RISET connected between this pin and GND. Recommended RISET range 33k to 330k ohm. Open voltage VISET_OPEN typ 2.5V. IDIM/ISET ratio KDIM typ 4; ICLAMP/ISET ratio KCLAMP typ 0.4. Absolute max -0.3V to 6V."
},
{
"number": "5",
"name": "CLAMP",
"type": "passive",
"description": "Sets the minimum output clamped duty cycle via a resistor RCLAMP between this pin and GND. Open voltage VCLAMP_OPEN typ 5.0V. RCLAMP options: >=1M or open -> 0% min duty; 300k -> 4%; 150k -> 6%; 0 ohm -> 8%. Absolute max -0.3V to 6V."
},
{
"number": "6",
"name": "DIM",
"type": "input",
"description": "Dimming signal input. Accepts three input modes: 0/1V-10V voltage potential, 0.2kHz-10kHz PWM (high level 3.2-13V, low <=1.2V, slew >=3V/us to trigger PWM mode), or 0-100k ohm potentiometer to GND. Open voltage VDIM_OPEN typ 13V; bias current IDIM_100 typ 100uA at RISET=100k. Absolute max -0.3V to 20V."
}
],
"provenance": {
"extractor": "ds2sf",
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/15adc2f3c935ecb2d8554e0b15615a73.pdf",
"pages": 13,
"sha256": "1c51e710735bd0db",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 6,
"described": 6,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ld8116dgl.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.8,
2.9,
1.55
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ld8116dgl-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.8,
2.9,
1.55
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "c397c2a0dc9843a0d3be9d6cb2310c275de68a45d40a0c8f87dae8ad1bdfdfcc",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "Leadtrend Tech",
"Package": "SOT-26",
"Category": "PMIC",
"Pins": "6"
}
},
"variants": [
{
"mpn": "LD8116DGL",
"kind": "packaging"
}
],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"ld8116dgl"
],
"discovery_pitch": "LD8116DGL (Leadtrend Tech) component page with datasheet-verified CAD.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ld8116dgl.kicad_sym",
"ld8116dgl.kicad_mod",
"ld8116dgl.glb",
"ld8116dgl.step",
"ld8116dgl.lbr",
"docs/hero.png",
"docs/ld8116dgl-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"visibility": {
"public": true
},
"updated_at": "2026-09-24T23:51:26.131Z"
}