main
Ray
ld8116dgl: laser-etched CAD + chip hero (factory 2.0.0 backfill)
78df1b8
LD8116DGL
Leadtrend Tech · AC-DC Controllers and Regulators · SOT-26
LD8116DGL from Leadtrend Tech, in a SOT-26. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Supply voltage pin. Recommended operating range 15V to 56V (absolute max -0.3V to 60V). Requires a 0.1uF-0.47uF SMD ceramic bypass capacitor close to the pin. UVLO_ON typ 7.0V, UVLO_OFF typ 6.0V. Operating current typ 600uA. |
| 2 | GND | power_in | Ground or power return pin. |
| 3 | OUT | output | Dimming output. Open-drain configuration (typ 1.5kHz output frequency, sink up to 20mA recommended / 30mA absolute max, VOUT_LOW <=200mV @ 2mA). Connect to a power supply via a pull-up resistor, typically driving the DIM input of a downstream LED driver via an opto-coupler. |
| 4 | ISET | passive | Sets bias current of the DIM pin via a resistor RISET connected between this pin and GND. Recommended RISET range 33k to 330k ohm. Open voltage VISET_OPEN typ 2.5V. IDIM/ISET ratio KDIM typ 4; ICLAMP/ISET ratio KCLAMP typ 0.4. Absolute max -0.3V to 6V. |
| 5 | CLAMP | passive | Sets the minimum output clamped duty cycle via a resistor RCLAMP between this pin and GND. Open voltage VCLAMP_OPEN typ 5.0V. RCLAMP options: >=1M or open -> 0% min duty; 300k -> 4%; 150k -> 6%; 0 ohm -> 8%. Absolute max -0.3V to 6V. |
| 6 | DIM | input | Dimming signal input. Accepts three input modes: 0/1V-10V voltage potential, 0.2kHz-10kHz PWM (high level 3.2-13V, low <=1.2V, slew >=3V/us to trigger PWM mode), or 0-100k ohm potentiometer to GND. Open voltage VDIM_OPEN typ 13V; bias current IDIM_100 typ 100uA at RISET=100k. Absolute max -0.3V to 20V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Leadtrend Tech |
| Package | SOT-26 |
| Category | PMIC |
| Pins | 6 |
Ordering variants
Same part, different packaging or reel option.
LD8116DGL
CAD (KiCad official)
- Symbol:
LD8116DGL - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-26 (KiCad packages3D, STEP)
- 3D model files:
ld8116dgl-etched.step/ld8116dgl-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ld8116dgl.step/ld8116dgl.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Leadtrend Tech datasheet (13 pp, sha256
1c51e710735bd0db, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LD8116DGL
**Leadtrend Tech** · AC-DC Controllers and Regulators · SOT-26
LD8116DGL from Leadtrend Tech, in a SOT-26. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Supply voltage pin. Recommended operating range 15V to 56V (absolute max -0.3V to 60V). Requires a 0.1uF-0.47uF SMD ceramic bypass capacitor close to the pin. UVLO_ON typ 7.0V, UVLO_OFF typ 6.0V. Operating current typ 600uA. |
| 2 | GND | power_in | Ground or power return pin. |
| 3 | OUT | output | Dimming output. Open-drain configuration (typ 1.5kHz output frequency, sink up to 20mA recommended / 30mA absolute max, VOUT_LOW <=200mV @ 2mA). Connect to a power supply via a pull-up resistor, typically driving the DIM input of a downstream LED driver via an opto-coupler. |
| 4 | ISET | passive | Sets bias current of the DIM pin via a resistor RISET connected between this pin and GND. Recommended RISET range 33k to 330k ohm. Open voltage VISET_OPEN typ 2.5V. IDIM/ISET ratio KDIM typ 4; ICLAMP/ISET ratio KCLAMP typ 0.4. Absolute max -0.3V to 6V. |
| 5 | CLAMP | passive | Sets the minimum output clamped duty cycle via a resistor RCLAMP between this pin and GND. Open voltage VCLAMP_OPEN typ 5.0V. RCLAMP options: >=1M or open -> 0% min duty; 300k -> 4%; 150k -> 6%; 0 ohm -> 8%. Absolute max -0.3V to 6V. |
| 6 | DIM | input | Dimming signal input. Accepts three input modes: 0/1V-10V voltage potential, 0.2kHz-10kHz PWM (high level 3.2-13V, low <=1.2V, slew >=3V/us to trigger PWM mode), or 0-100k ohm potentiometer to GND. Open voltage VDIM_OPEN typ 13V; bias current IDIM_100 typ 100uA at RISET=100k. Absolute max -0.3V to 20V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Leadtrend Tech |
| Package | SOT-26 |
| Category | PMIC |
| Pins | 6 |
## Ordering variants
Same part, different packaging or reel option.
- `LD8116DGL`
## CAD (KiCad official)
- Symbol: `LD8116DGL`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-26 (KiCad packages3D, STEP)
- 3D model files: `ld8116dgl-etched.step` / `ld8116dgl-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ld8116dgl.step` / `ld8116dgl.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Leadtrend Tech datasheet](docs/ld8116dgl-datasheet.pdf) (13 pp, sha256 `1c51e710735bd0db`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ld8116dgl-datasheet.pdf)