main
Ray ld7792sgs: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) f5d548e
{
  "slug": "ld7792sgs",
  "version": "0.1.0",
  "type": "component",
  "description": "Leadtrend Tech AC-DC Controllers and Regulators, SOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "pmic",
    "ld7792sgs"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ld7792sgs.kicad_sym",
    "ld7792sgs.kicad_mod",
    "ld7792sgs.glb",
    "ld7792sgs.step",
    "ld7792sgs.lbr",
    "docs/hero.png",
    "docs/ld7792sgs-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ld7792sgs-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "author": {
    "name": "Ray"
  },
  "component": {
    "mpn": "LD7792SGS",
    "manufacturer": "Leadtrend Tech",
    "package": "SOP-16",
    "pin_count": 16,
    "category": "AC-DC Controllers and Regulators",
    "parts": {
      "symbol": "ld7792sgs.kicad_sym",
      "footprint": "ld7792sgs.kicad_mod",
      "model_3d": "ld7792sgs-etched.glb",
      "model_3d_plain": "ld7792sgs.glb",
      "model_3d_step": "ld7792sgs-etched.step",
      "model_3d_step_plain": "ld7792sgs.step",
      "lbr": "ld7792sgs.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage pin. Recommended operating range 10 V to 29 V; UVLO(on)=18 V typ, UVLO(off)=8 V typ, VCC OVP=31.5 V typ, PDR=7 V typ. Bypass with a 22-100 uF capacitor."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground return for the controller. All small-signal returns and current-sense resistors reference to this pin."
      },
      {
        "number": "3",
        "name": "FBCOMP",
        "type": "input",
        "description": "Voltage feedback pin for the Flyback stage. Connect a photo-coupler to close the secondary-side regulation loop. Also used for OLP (VOLP=4.2 V typ), burst mode (start 0.8 V / stop 0.4 V), PFC on/off threshold and heavy-load trigger (2.9 V). Internally divided 1/5.5 into the PWM comparator; open-loop clamp 5.4 V typ."
      },
      {
        "number": "4",
        "name": "FBAUX",
        "type": "input",
        "description": "Zero-current detection and over-voltage protection for the Flyback unit. Sensed via a resistor from the transformer auxiliary winding; ZCD trip 50 mV, OVP trigger current 300 uA (4-cycle debounce), upper clamp 2 V, lower clamp 0 V."
      },
      {
        "number": "5",
        "name": "OTP",
        "type": "input",
        "description": "External over-temperature protection pin. Sources 80 uA typ through an external NTC to ground; turn-off trip 1.0 V typ (with 400-600 us debounce), turn-on 1.35 V typ. Auto-recovery when temperature falls."
      },
      {
        "number": "6",
        "name": "PFCCOMP",
        "type": "output",
        "description": "Output of the PFC voltage-loop transconductance error amplifier (GM=80 umho typ). Connect a 0.1-2.2 uF compensation capacitor to GND. Upper clamp 5.2 V typ, minimum clamp 0.9 V; PFC burst mode stop threshold 1.0 V typ."
      },
      {
        "number": "7",
        "name": "PFCONOFF",
        "type": "input",
        "description": "Threshold-voltage setting pin for PFC ON/OFF loading control (compared against FBCOMP). Sources 24.5 uA typ for the PFC-OFF threshold and 25.75 uA typ for the PFC-ON threshold; set the threshold with an external resistor to GND."
      },
      {
        "number": "8",
        "name": "PFCAUX",
        "type": "input",
        "description": "Zero-current detection input for the PFC boost stage. Connect through a 10-51 kohm resistor to the PFC auxiliary winding (recommended current ~1 mA, max 1.5 mA). ZCD trip 0.2 V, upper clamp 4 V, ZCD time-out 50 us typ."
      },
      {
        "number": "9",
        "name": "VOSENSE",
        "type": "input",
        "description": "PFC output voltage sense input. Regulation reference is 2.5 V; PFC OVP trip 2.63 V (0.13 V hysteresis). Sources 8 uA at low line (VHV<=210 V) for line-compensation, 0 uA at high line (>=230 V). Enable/disable thresholds 1.1/0.9 V; internal pull-down 6 Mohm typ. Recommended capacitor <=10 nF."
      },
      {
        "number": "10",
        "name": "FBSENSE",
        "type": "input",
        "description": "Flyback current-sense input. Connect to the Flyback MOSFET source sense resistor to implement cycle-by-cycle peak-current limit at VOCQR=0.65 V typ (350 ns LEB, 80 ns delay). OCP high-line compensation adds 200 uA through an external ROCP (100-1k ohm) when FBCOMP>2.9 V."
      },
      {
        "number": "11",
        "name": "PFCSENSE",
        "type": "input",
        "description": "PFC current-sense input. Connect to the PFC MOSFET source sense resistor for cycle-by-cycle current limit; trip threshold 0.52 V at low line, 0.40 V at high line (>=230 V) with 250 ns LEB. Sense resistor value also selects PWM vs QRM frequency reduction mode (<=220 ohm PWM, >=820 ohm QRM)."
      },
      {
        "number": "12",
        "name": "PFCDRIVER",
        "type": "output",
        "description": "Gate-drive output for the external PFC boost MOSFET. CMOS totem-pole with 500/-1000 mA drive; output clamped at 13 V typ (VCC=17 V), rise time 130 ns / fall time 45 ns into 3 nF. Absolute max -0.3 V to 20 V."
      },
      {
        "number": "13",
        "name": "FBDRIVER",
        "type": "output",
        "description": "Gate-drive output for the external Flyback MOSFET. CMOS totem-pole with 500/-1000 mA drive; output clamped at 13 V typ (VCC=17 V), rise time 130 ns / fall time 45 ns into 3 nF. Absolute max -0.3 V to 20 V."
      },
      {
        "number": "14",
        "name": "CT",
        "type": "passive",
        "description": "External timing capacitor pin. Sets OLP debounce time, PFC turn-off debounce time and Flyback soft-start period; e.g. CT=47 nF gives FB soft-start 10 ms, OLP debounce 64 ms, PFC turn-off debounce 1 s."
      },
      {
        "number": "15",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection. Leave floating or tie to GND per PCB practice."
      },
      {
        "number": "16",
        "name": "HV",
        "type": "power_in",
        "description": "High-voltage startup and line-sensing pin. Connect to AC line/neutral (input side of bridge diode preferred) through a 10-50 kohm resistor to source the VCC start-up current (1.5 mA below PDR, 3 mA between PDR and UVLO(on)); shut off after UVLO(on) to eliminate startup loss. Also senses AC peak for brown-in (105 V typ) / brown-out (85 V typ), high/low line detection (230 V / 210 V typ) and X-cap discharge (3 mA). Absolute max 650 V; add a 10 kohm series resistor to limit negative-spike current."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "lcsc": "C648778",
      "digikey": false,
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:03:13Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "ld7792sgs.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ld7792sgs-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "6b458f3c3c1d6763a22841f70248a0b9c6d4c8d1c05d0b9b09fe0adb68e891f7",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}